Opens in a new tab

NCP304LSQ30T1G

3.0V voltage detector, 0.5uA IQ, open-drain, SOT-23-3

50000

Effective Inventory

Image for reference only

Manufacturer Part:

NCP304LSQ30T1G

Package:

SOT-23-3 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NCP304LSQ30T1G from onsemi is a micro-power voltage detector with 3.0V threshold, open-drain output, and 0.5uA typical supply current in SOT-23-3 package.

Key Specifications

Type Voltage Detector / Supervisory Reset IC
Threshold Voltage 3.0 V (+/-1.5% accuracy)
Output Type Open-drain N-channel (active low)
Supply Current 0.5 uA typical / 1.5 uA max
Operating Voltage 0.8 V to 10 V
Output Voltage Low (VOL) 0.3V max @ 1.5mA sink
Detect Release Voltage 3.0V + hysteresis (30mV typical)
Response Time 40 us typical (VDD = 3.0V)
Package SOT-23-3 (LSQ suffix)
Operating Temperature -40 to +85 C

Features

  • 0.5uA ultra-low supply current for battery-powered applications
  • +/-1.5% accurate threshold voltage for precise monitoring
  • Open-drain output with internal 50kOhm pull-up option
  • 30mV hysteresis prevents chattering near threshold
  • 3-pin SOT-23 package minimizes board area

Applications

  • Microcontroller brown-out detection and reset
  • Battery voltage monitoring in portable devices
  • Power-on reset generation for digital systems
  • Li-ion battery under-voltage lockout
  • System voltage supervisory and watchdog
Product Introduction: NCP304LSQ30T1G Product Introduction

The NCP304LSQ30T1G from onsemi is a micro-power voltage detector with 3.0V threshold in SOT-23-3 package. The device features 0.5uA typical supply current, +/-1.5% threshold accuracy, open-drain N-channel output, and 30mV hysteresis for stable detection without chattering. When VDD drops below the 3.0V threshold, the open-drain output pulls low (active low). When VDD rises above 3.0V + hysteresis, the output releases. The ultra-low 0.5uA supply current makes the device ideal for battery-powered applications where quiescent current must be minimized. The LSQ30T1G part number encodes: LSQ = SOT-23-3, 30 = 3.0V threshold, T1 = tape and reel, G = lead-free.

Working Principle: NCP304LSQ30T1G Working Principle

The NCP304LSQ30T1G operates as a precision voltage detector with hysteresis. (1) The device continuously monitors the supply voltage (VDD) and compares it with the internal 3.0V bandgap reference. When VDD is above the release threshold (3.0V + 30mV hysteresis = 3.03V typical), the open-drain N-channel output is off (high impedance), allowing an external pull-up resistor to hold the reset line high. When VDD drops below the detect threshold (3.0V typical), the internal comparator activates the N-channel output, pulling the reset line low to assert a reset condition. (2) The 30mV hysteresis between the detect and release thresholds prevents output chattering when VDD hovers near the threshold. Without hysteresis, noise on VDD could cause the output to oscillate, generating false resets. The hysteresis ensures clean single-transition behavior. (3) The ultra-low 0.5uA supply current is achieved by using a sub-threshold CMOS bandgap reference and comparator design. The entire circuit draws less than 1.5uA maximum, making the device effectively invisible in battery-powered systems. For example, a 1000mAh Li-ion battery would take over 50 years to discharge from the NCP304 alone, making it suitable for always-on monitoring in IoT and wearable devices.

Pin Description: NCP304LSQ30T1G Pin Definition and Functions
Pin Name Function
1 VDD Supply voltage / sense input (0.8-10V)
2 GND Ground
3 OUT Open-drain output (active low)
Application Scenarios: In which products and applications is NCP304LSQ30T1G used
  • Microcontroller brown-out detection at 3.0V threshold
  • Battery voltage monitoring in portable devices with 0.5uA IQ
  • Power-on reset generation for 3.3V digital systems
  • Li-ion battery under-voltage lockout at 3.0V
  • System voltage supervisory for industrial and automotive
Alternative Models: What chips are recommended as replacements for NCP304LSQ30T1G
Model Manufacturer Key Difference
NCP304LSQ28T1G onsemi 2.8V threshold, same family
TPS3809K33DBVR TI 3.08V, push-pull, SOT-23-3
MCP111-300-OTTO Microchip 3.0V, open-drain, SOT-23-3
MAX809TRG ADI 3.08V, push-pull, SOT-23-3
BL8503-30DN Shanghai Belling 3.0V, SOT-23-3, low cost

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1