Opens in a new tab

MIC5219-3.3YM5-TR

500mA 3.3V fixed LDO, 0.01uA standby, SOT-23-5

35000

Effective Inventory

Image for reference only

Manufacturer Part:

MIC5219-3.3YM5-TR

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MIC5219-3.3YM5-TR from Microchip Technology is a 500mA fixed 3.3V LDO regulator with 500mV dropout, 0.01uA standby, and current limit protection in SOT-23-5 package.

Key Specifications

Output Voltage 3.3 V fixed (+/-2%)
Input Voltage Range 2.5 V to 16 V
Output Current 500 mA maximum
Dropout Voltage 500 mV typical @ 500mA
Quiescent Current (Active) 1.8 mA typical
Standby Current (EN off) 0.01 uA typical
Output Noise 100 uVrms (10Hz-100kHz)
PSRR 70 dB @ 1kHz
Line Regulation 0.004 %/V
Load Regulation 0.1 %
Protection Current limit, thermal shutdown, reverse battery
Enable Pin Active high (0.01uA standby)
Package SOT-23-5 (YM5 suffix)
Operating Temperature -40 to +125 C

Features

  • 0.01uA near-zero standby current via enable pin
  • 500mA output with 500mV dropout in SOT-23-5
  • 70dB PSRR for clean output from noisy input
  • Current limit, thermal shutdown, and reverse-battery protection
  • 3.3V fixed output eliminates external resistor divider

Applications

  • Mobile phone and portable device power management
  • USB bus-powered 3.3V supply
  • RF module and wireless transceiver clean supply
  • MCU and FPGA I/O voltage regulation
  • Battery-powered systems with enable power gating
Product Introduction: MIC5219-3.3YM5-TR Product Introduction

The MIC5219-3.3YM5-TR from Microchip Technology is a 500mA fixed 3.3V low-dropout regulator in SOT-23-5 package. The device features 500mV typical dropout at 500mA, 70dB PSRR at 1kHz, 100uVrms output noise, and 0.01uA standby current when disabled via the enable pin. The fixed 3.3V output eliminates the need for external feedback resistors, reducing BOM count. Comprehensive protection includes current limit, thermal shutdown, and reverse-battery protection. The YM5-TR suffix denotes SOT-23-5 package with tape and reel packaging. The device is widely used in mobile phones, USB peripherals, and RF modules requiring a clean, low-noise 3.3V supply.

Working Principle: MIC5219-3.3YM5-TR Working Principle

The MIC5219-3.3YM5-TR operates as a fixed-output positive LDO voltage regulator. (1) The pass element is a PNP transistor between IN and OUT. The error amplifier compares a fraction of the output voltage (via an internal resistor divider for the fixed 3.3V version) with an internal bandgap reference. The amplifier output drives the base of the PNP pass transistor to regulate the output. The PNP architecture allows the dropout voltage to be as low as VCE(sat) of the pass transistor, typically 500mV at 500mA. (2) The enable pin (EN) is active high. When EN is low, the pass transistor is fully off and the device draws only 0.01uA from the input supply. This near-zero standby current is critical for battery-powered applications where the regulator may be disabled for extended periods. When EN is high, the device regulates normally with 1.8mA typical quiescent current. (3) The 70dB PSRR at 1kHz means that 1V of input ripple is attenuated to 0.3mV at the output, making the device ideal for post-regulation after a switching converter. The 100uVrms output noise (10Hz-100kHz) ensures clean supply for noise-sensitive analog and RF circuits. The internal current limit protects against output short circuits, while the thermal shutdown protects against excessive junction temperature. The reverse-battery protection prevents damage if the input supply is accidentally reversed.

Pin Description: MIC5219-3.3YM5-TR Pin Definition and Functions
Pin Name Function
1 IN Input supply (2.5-16V)
2 GND Ground
3 EN Enable (active high, 0.01uA standby)
4 BYP Noise bypass capacitor (optional)
5 OUT 3.3V regulated output (500mA max)
Application Scenarios: In which products and applications is MIC5219-3.3YM5-TR used
  • Mobile phone and portable device 3.3V power with 0.01uA standby
  • USB bus-powered 3.3V supply with 500mA output
  • RF module and wireless transceiver clean supply with 70dB PSRR
  • MCU and FPGA I/O 3.3V regulation with current limit protection
  • Battery-powered systems with enable power gating
Alternative Models: What chips are recommended as replacements for MIC5219-3.3YM5-TR
Model Manufacturer Key Difference
MIC5219-5.0YM5-TR Microchip 5.0V fixed, same family
RT9013-33GB Richtek 500mA, 3.3V, SOT-23-5
AP2112K-3.3TRG1 Diodes Inc 600mA, 3.3V, SOT-23-5
TLV70033DDCR TI 300mA, 3.3V, SOT-23-5
NCV8164ASN330T1G onsemi 300mA, 3.3V, AEC-Q100

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1