Product Overview
The MAX3232ECPWR from Texas Instruments is a 3V to 5.5V dual-channel RS-232 line driver/receiver with +/-15kV IEC ESD protection. It features two drivers and two receivers, operates at data rates up to 250 kbps, and requires only four 0.1uF external capacitors. Housed in a 16-pin TSSOP (PW) package, it provides reliable serial communication interface with enhanced ESD protection.
Key Specifications
| Supply Voltage | 3V to 5.5V |
| Drivers / Receivers | 2 / 2 |
| Data Rate | Up to 250 kbps |
| ESD Protection | +/-15kV HBM, +/-8kV IEC contact, +/-15kV IEC air-gap |
| Supply Current | 300 uA (typical) |
| External Capacitors | 4 x 0.1 uF |
| Driver Output Slew Rate | 30 V/us max |
| Operating Temperature | 0°C to +70°C |
| Package | TSSOP-16 (PW), 5.00 x 4.40 mm |
Features
- +/-15kV IEC ESD protection on all RS-232 bus pins
- Meets TIA/EIA-232-F and ITU V.28 standards
- 3V to 5.5V single supply operation with integrated charge pump
- Low 300 uA supply current
- Accepts 5V logic input with 3.3V supply
- Pin compatible with industry-standard MAX232
- Battery-powered RS-232 communication systems
- Industrial automation and control interfaces
- Point-of-sale terminals and modems
- Notebook and palmtop computer serial ports
- Embedded system debug UART interfaces
- Industrial automation: RS-232 communication interface for PLCs and motor drives with robust ESD protection
- Embedded systems: Debug UART interface converting MCU logic levels to RS-232 for terminal access
- Point-of-sale terminals: Serial port for barcode scanners, receipt printers and cash drawers
- Battery-powered devices: Low 300uA supply current enables portable RS-232 communication
- Modems and networking: RS-232 interface for legacy communication equipment
Applications
Product Introduction: MAX3232ECPWR Product Introduction
The MAX3232ECPWR is a dual-channel RS-232 line driver and receiver from Texas Instruments with enhanced +/-15kV IEC ESD protection. The device consists of two line drivers, two line receivers, and a dual charge-pump circuit. It meets the requirements of TIA/EIA-232-F and provides the electrical interface between asynchronous communication controllers and serial-port connectors. The integrated charge pump and four small 0.1uF external capacitors enable operation from a single 3V to 5.5V supply. The device operates at data rates up to 250 kbps and is pin-compatible with the industry-standard MAX232 device.
Working Principle: MAX3232ECPWR Working Principle
The MAX3232ECPWR uses an internal dual charge-pump circuit to generate the +/-5.5V voltage rails required for RS-232 compliant output levels from a single 3V to 5.5V supply. The charge pump uses four external 0.1uF capacitors for voltage doubling and inversion. The driver circuits convert TTL/CMOS logic levels to RS-232 compliant voltage levels (+/-5V to +/-7V), while the receivers convert RS-232 input signals back to TTL/CMOS logic levels. All RS-232 bus pins incorporate enhanced ESD protection structures rated at +/-15kV using IEC 61000-4-2 air-gap discharge and +/-8kV contact discharge.
Pin Description: MAX3232ECPWR Pin Definition and Functions
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | — | Positive lead of C1 capacitor |
| 2 | V+ | Output | Positive charge pump output |
| 3 | C1- | — | Negative lead of C1 capacitor |
| 4 | C2+ | — | Positive lead of C2 capacitor |
| 5 | C2- | — | Negative lead of C2 capacitor |
| 6 | V- | Output | Negative charge pump output |
| 7 | DOUT2 | Output | RS-232 driver 2 output |
| 8 | RIN2 | Input | RS-232 receiver 2 input |
| 9 | ROUT2 | Output | Logic receiver 2 output |
| 10 | DIN2 | Input | Logic driver 2 input |
| 11 | DIN1 | Input | Logic driver 1 input |
| 12 | ROUT1 | Output | Logic receiver 1 output |
| 13 | RIN1 | Input | RS-232 receiver 1 input |
| 14 | DOUT1 | Output | RS-232 driver 1 output |
| 15 | GND | Ground | Ground |
| 16 | VCC | Power | Supply voltage (3V to 5.5V) |
Application Scenarios: In which products and applications is MAX3232ECPWR used
Alternative Models: What chips are recommended as replacements for MAX3232ECPWR
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| TI | MAX3232CPWR | TSSOP-16 | Without IEC ESD enhancement |
| TI | SN65C3232EPWR | TSSOP-16 | High-speed 1Mbps, -40 to 85°C |
| TI | MAX3221ECPWR | TSSOP-16 | 1 driver/1 receiver, auto-powerdown |
| ADI | ADM3202ARNZ | TSSOP-16 | +/-15kV ESD, 3.3V, pin compatible |
| MaxLinear | SP3232ECY-L/TR | TSSOP-16 | +/-15kV ESD, 250kbps |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






