Opens in a new tab

TLV71333PDBVR

300mA LDO, 3.3V fixed output, 150mV dropout, 25uA IQ, SOT-23-5

3824

Effective Inventory

Image for reference only

Manufacturer Part:

TLV71333PDBVR

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV71333PDBVR from Texas Instruments is a 300mA low-dropout linear regulator with fixed 3.3V output, ultra-low IQ of 25uA, and SOT-23-5 package, designed for portable and battery-powered applications.

Key Specifications

Output Voltage 3.3V fixed
Output Current 300mA
Input Voltage Range 1.4 to 5.5V
Dropout Voltage 150mV @ 300mA
Quiescent Current 25uA
PSRR 60dB @ 1kHz
Output Noise 32uVrms
Package SOT-23-5
Operating Temperature -40 to +125 C

Features

  • Ultra-low quiescent current of 25uA
  • Very low dropout voltage of 150mV at 300mA
  • High PSRR of 60dB at 1kHz
  • Stable with 1uF ceramic capacitors
  • Active discharge feature
  • Thermal shutdown and current limit protection

Applications

  • Portable battery-powered devices
  • Wearable electronics
  • Smartphones and tablets
  • IoT sensor nodes
Product Introduction: TLV71333PDBVR Product Introduction

The TLV71333PDBVR from Texas Instruments is a low-dropout (LDO) linear regulator providing a fixed 3.3V output at up to 300mA. It features an ultra-low quiescent current of only 25uA, making it ideal for battery-powered and always-on applications. The device operates with input voltages from 1.4V to 5.5V and achieves a low dropout voltage of 150mV at full 300mA load. High power-supply rejection ratio (PSRR) of 60dB at 1kHz ensures clean output voltage even from noisy input sources. The TLV713P is stable with just a 1uF ceramic output capacitor, minimizing board space. Built-in protection features include current limit, thermal shutdown, and an active output discharge function. The tiny SOT-23-5 package (2.9 x 1.6 x 1.1mm) is ideal for space-constrained designs.

Working Principle: TLV71333PDBVR Working Principle

The TLV71333PDBVR operates as a series-pass linear regulator with three key subsystems: (1) Bandgap reference – A precision bandgap voltage reference generates a stable 1.2V reference that is amplified and divided to produce the fixed 3.3V output. The reference is trimmed during manufacturing for tight initial accuracy. (2) Error amplifier and pass element – A P-channel MOSFET pass transistor is controlled by a high-gain error amplifier that compares a fraction of the output voltage with the internal reference. When the output drops below the target, the amplifier drives the PMOS gate lower, increasing current flow and restoring the output voltage. The P-channel architecture allows very low dropout since the gate can be driven to near ground. (3) Protection circuits – Current limiting protects against output shorts by sensing the pass element current. Thermal shutdown disables the output when junction temperature exceeds approximately 160C. An active discharge resistor on the output quickly discharges output capacitors when the regulator is disabled.

Pin Description: TLV71333PDBVR Pin Definition and Functions
Pin Name Function
1 OUT Regulated 3.3V output
2 GND Ground
3 EN Enable input (active high)
4 NC No connection
5 IN Input supply (1.4-5.5V)
Application Scenarios: In which products and applications is TLV71333PDBVR used
  • Portable battery-powered devices requiring 3.3V rail with 25uA quiescent current to extend battery life
  • Wearable electronics and fitness trackers using the tiny SOT-23-5 package
  • IoT sensor nodes with always-on rails leveraging high 60dB PSRR for noise-sensitive RF sections
  • Post-regulation after DC-DC converters needing clean 3.3V supply with only 1uF output capacitor
Alternative Models: What chips are recommended as replacements for TLV71333PDBVR
Model Manufacturer Key Difference
TLV70033DDCR TI Same specs, SOT-23-5, 200mA
AP2112K-3.3 Diodes Inc 600mA, higher dropout
RT9193-33GB Richtek 300mA, similar specs
NCP511SN33T1G onsemi 150mA, lower current

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1