Opens in a new tab

LM340MP-5.0/NOPB

1.5A fixed 5V linear regulator, 35V input, thermal protection, SOT-223

10935

Effective Inventory

Image for reference only

Manufacturer Part:

LM340MP-5.0/NOPB

Package:

SOT-223 (DCY) 6.5 x 3.5 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM340MP-5.0/NOPB from Texas Instruments is a 1.5A, 35V input, fixed 5V positive linear voltage regulator in a SOT-223 package. Part of the legendary LM340/7805 family, it features internal current limiting, thermal shutdown, and safe-area compensation, making it essentially indestructible with adequate heatsinking. Output voltage tolerance is +/-2% at 25°C.

Key Specifications

Output Voltage 5.0V fixed (+/-2%)
Output Current 1.5A
Input Voltage 7V to 35V
Dropout Voltage 2V (typical at 1A)
Line Regulation 0.01%/V (LM340A at 1A)
Load Regulation 0.3%/A (LM340A)
Ripple Rejection 80 dB (typical)
Operating Temperature 0°C to +125°C
Package SOT-223 (DCY), 6.5 x 3.5 mm

Features

  • 1.5A output current capability
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Safe-area compensation for output transistor
  • Output capacitance not required for stability
  • +/-2% output voltage tolerance at 25°C

Applications

  • Local on-card voltage regulation
  • 5V logic power supply from 9V/12V source
  • Power supply post-regulation
  • Battery charger regulation
  • General-purpose 5V power regulation
Product Introduction: LM340MP-5.0/NOPB Product Introduction

The LM340MP-5.0/NOPB is a monolithic 3-terminal positive voltage regulator from Texas Instruments. It is part of the LM340/LM7805 family, one of the most widely used linear regulator families in the electronics industry. The device employs internal current-limiting, thermal shutdown, and safe-area compensation, making it extremely robust and reliable. With adequate heatsinking, it can deliver over 1.5A of output current. The SOT-223 package provides a good balance between compact size and thermal performance. The device is intended for fixed 5V regulation in a wide range of applications including local on-card regulation for elimination of noise and distribution problems associated with single-point regulation.

Working Principle: LM340MP-5.0/NOPB Working Principle

The LM340MP-5.0/NOPB uses a series pass transistor controlled by a feedback loop that compares a fraction of the output voltage (via an internal resistor divider) with a precision bandgap reference. The error amplifier drives the base of the series pass transistor to maintain the output at 5.0V. Internal current-limiting circuitry senses the output current and limits it to a safe value during overload or short-circuit conditions. The thermal shutdown circuit monitors junction temperature and turns off the output when it exceeds approximately 170°C. Safe-area compensation reduces the current limit as the input-output differential increases, ensuring the pass transistor operates within its safe operating area at all times. No output capacitor is required for stability, although one improves transient response.

Pin Description: LM340MP-5.0/NOPB Pin Definition and Functions
Pin Name Type Function
1 GND/Tab Ground Ground and thermal pad
2 OUT Output Regulated 5V output, up to 1.5A
3 IN Power Input voltage (7V to 35V)
Application Scenarios: In which products and applications is LM340MP-5.0/NOPB used
  • 5V logic supply: Classic 7805 replacement for digital IC power from 9V/12V wall adapters
  • Local regulation: On-card 5V regulation eliminates noise from long power supply traces
  • Post-regulation: Clean 5V output after switching converter for analog/digital circuits
  • Industrial control: Robust thermal and short-circuit protection for harsh environments
  • Battery devices: 1.5A capability for motor-driven and relay-switching applications
Alternative Models: What chips are recommended as replacements for LM340MP-5.0/NOPB
Manufacturer Part Number Package Notes
TI LM340MPX-5.0/NOPB SOT-223 Tape and reel version
TI UA7805CKTTR TO-252 (DPAK) 1.5A, DPAK package, surface mount
ONsemi MC7805ECTG TO-220 1A, through-hole, classic 7805
ST L7805CV TO-220 1.5A, industry standard 7805
Infineon TLE4274GV33 TO-252 3.3V, 200mA, automotive

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1