Opens in a new tab

LP2951CMX/NOPB

100mA micropower LDO, adjustable/5V, 75uA IQ, 380mV dropout, error flag, SOIC-8

4286

Effective Inventory

Image for reference only

Manufacturer Part:

LP2951CMX/NOPB

Package:

SOIC-8 (4.9 x 3.9 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP2951CMX/NOPB from Texas Instruments is a 100mA micropower LDO voltage regulator with adjustable or fixed 5V output, error flag, shutdown, and very low quiescent current of 75uA in SOIC-8 package.

Key Specifications

Output Current 100mA
Output Voltage Adjustable (1.24-29V) / Fixed 5V
Input Voltage 2.3 to 30V
Dropout Voltage 380mV @ 100mA
Quiescent Current 75uA typical
Reference Voltage 1.235V
Line Regulation 0.05% typical
Load Regulation 0.05% typical
Package SOIC-8
Operating Temperature -40 to +125 C

Features

  • Extremely low quiescent current: 75uA typical
  • Low dropout voltage: 380mV at 100mA
  • Output programmable from 1.24V to 29V
  • Error flag warns of output dropout
  • Logic-controlled shutdown input
  • Stable with low-ESR output capacitors

Applications

  • Battery-powered systems
  • Voltage reference circuits
  • Automotive electronics
  • Portable instrumentation
Product Introduction: LP2951CMX/NOPB Product Introduction

The LP2951CMX/NOPB from Texas Instruments is a micropower low-dropout voltage regulator capable of supplying up to 100mA of output current. It features an extremely low quiescent current of 75uA typical, which increases only slightly in dropout, making it ideal for battery-powered systems where long battery life is critical. The device can be configured for a fixed 5V output by connecting the FEEDBACK pin to the VTAP pin, or the output voltage can be programmed from 1.24V to 29V using an external resistor divider. The LP2951 includes an error flag output that warns of a low output voltage (useful for power-on reset), and a logic-compatible shutdown input that can turn the regulator on and off. The tight initial tolerance (0.5% typical), excellent line and load regulation (0.05% typical), and very low temperature coefficient make the LP2951 useful as a low-power voltage reference as well as a regulator.

Working Principle: LP2951CMX/NOPB Working Principle

The LP2951CMX/NOPB operates through four main subsystems: (1) Bandgap reference – A precision trimmed bandgap reference generates a stable 1.235V reference voltage with very low temperature drift (20 ppm/C typical for new chip). This reference sets the output voltage accuracy. (2) Error amplifier – A high-gain error amplifier compares the feedback voltage (from the OUTPUT or an external divider) with the internal reference. The amplifier drives the base of the series pass transistor to maintain the output at the desired voltage. Tight loop gain ensures excellent line regulation (0.05% typical) and load regulation (0.05% typical). (3) Pass element and protection – A PNP series pass transistor provides the low dropout characteristic (380mV at 100mA). Current limiting protects against output short circuits, and thermal shutdown disables the output if junction temperature becomes excessive. (4) Auxiliary functions – The error comparator generates an active-low flag when the output drops below the regulated value by approximately 5%, useful for system power-on reset. The shutdown input accepts logic levels; when driven above 2V, the regulator output is disabled, reducing quiescent current to near zero.

Pin Description: LP2951CMX/NOPB Pin Definition and Functions
Pin Name Function
1 OUTPUT Regulated voltage output
2 SENSE Output sense (connect to OUTPUT)
3 SHUTDOWN Logic shutdown input (high=off)
4 GND Ground
5 ERROR Error flag output (active low)
6 VTAP Internal voltage tap (5V tap)
7 FEEDBACK Feedback input (tie to VTAP for 5V)
8 VIN Input supply (2.3-30V)
Application Scenarios: In which products and applications is LP2951CMX/NOPB used
  • Battery-powered systems with 75uA quiescent current extending battery life, error flag for low-battery detection
  • Adjustable voltage reference circuits from 1.24V to 29V with 0.5% initial accuracy and 20ppm/C drift
  • Automotive electronics requiring 30V input capability and -40C to +125C temperature range
  • Portable instrumentation using shutdown feature and error flag for system power management
Alternative Models: What chips are recommended as replacements for LP2951CMX/NOPB
Model Manufacturer Key Difference
LP2950CDT-5.0 TI Fixed 5V, TO-252, no error/shutdown
TLV70033DDCR TI 300mA, SOT-23-5, modern replacement
NCV2951SN1T1G onsemi Automotive qualified version
TPS70933DBVR TI 150mA, 1uA IQ, SOT-23-5

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1