Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » TBU-CA065-200-WH

TBU-CA065-200-WH

Bidirectional TBU surge protector, 650V clamp, 200mA, 1us response, DFN, resettable

14135

Effective Inventory

Image for reference only

Manufacturer Part:

TBU-CA065-200-WH

Package:

DFN (6.5 x 4.0 x 0.85 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TBU-CA065-200-WH from Bourns is a bidirectional high-speed surge protection device using MOSFET technology, providing overcurrent and overvoltage protection with 650V clamping and 200mA trigger current in DFN package.

Key Specifications

Type TBU High-Speed Protector (Bi-directional)
Working Voltage 300V
Clamping Voltage 650V
Trigger Current 300mA
Current Rating 200mA
Peak Pulse Current 400mA
Response Time 1us
RDS(ON) 9.8 Ohm
Reset Voltage 16V
Package DFN (6.5 x 4.0 x 0.85 mm)
Operating Temperature -55 to +125 C

Features

  • Overcurrent and overvoltage protection
  • Bi-directional protection
  • Sub-microsecond response time
  • Resettable after fault removal
  • Low capacitance for high-speed data lines
  • UL recognized

Applications

  • Ethernet and RS-485 port protection
  • Voice/VDSL card protection
  • Industrial process control
  • Test and measurement equipment
Product Introduction: TBU-CA065-200-WH Product Introduction

The TBU-CA065-200-WH from Bourns is a Transient Blocking Unit (TBU) high-speed protector that provides bidirectional overcurrent and overvoltage protection for sensitive electronic circuits. Unlike traditional shunt-type TVS devices that divert surge energy to ground, the TBU uses MOSFET semiconductor technology to disconnect the circuit path, blocking transients in under 1 microsecond. The device monitors line current and triggers to a high-impedance state when the current exceeds the trigger threshold (300mA), effectively creating a barrier between the surge and protected equipment. With a working voltage of 300V and clamping voltage of 650V, the TBU-CA065-200-WH is suitable for Ethernet, RS-485, and VDSL applications. The device is resettable – it automatically returns to the low-impedance state after the fault is removed and voltage drops below the reset voltage (16V). The low capacitance design allows high-speed data signals to pass through unimpeded.

Working Principle: TBU-CA065-200-WH Working Principle

The TBU-CA065-200-WH operates through three main states: (1) Normal (low-impedance) state – During normal operation, the internal MOSFET is in the on-state with an RDS(ON) of approximately 9.8 Ohm, allowing signal currents up to 200mA to pass through with minimal voltage drop. The device appears nearly transparent to the circuit, with very low capacitance that does not distort high-speed data signals. (2) Trigger (blocking) state – When a surge event causes the current through the device to exceed the trigger threshold (300mA), the internal current-sensing circuit activates the MOSFET gate drive to turn off the MOSFET. This transition occurs in less than 1 microsecond. In the blocking state, the device presents a very high impedance, limiting let-through energy to extremely low levels. The 650V clamping capability means the device can withstand voltage differences up to 650V while remaining blocked. (3) Reset state – After the surge subsides and the voltage across the device drops below the reset voltage (approximately 16V), the MOSFET automatically turns back on, restoring the normal low-impedance state. This resettable operation allows the device to survive thousands of fault events without degradation.

Pin Description: TBU-CA065-200-WH Pin Definition and Functions
Pin Name Function
1 Line Protected line connection
2 Common Common / ground reference
3 Line Protected line connection (bidirectional)
Application Scenarios: In which products and applications is TBU-CA065-200-WH used
  • Ethernet and RS-485 port protection blocking surge currents within 1us while allowing normal data signals through low capacitance
  • Voice/VDSL card protection with bidirectional blocking for AC power cross and lightning surge events up to 650V
  • Industrial process control equipment requiring resettable overcurrent and overvoltage protection without fuse replacement
  • Test and measurement equipment where the TBU’s sub-microsecond response prevents damage from transient faults
Alternative Models: What chips are recommended as replacements for TBU-CA065-200-WH
Model Manufacturer Key Difference
TBU-CA065-100-WH Bourns 100mA trigger, same voltage
TBU-CA025-050-WH Bourns 250V clamp, 50mA trigger
TISP4240M3BJR-S Bourns Thyristor surge protector
SMDJ33CA Bourns TVS diode, shunt type, 33V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1