Product Overview
The LM358DT from STMicroelectronics is a dual general-purpose operational amplifier with 1.1MHz GBW, 0.6V/us slew rate, and single/dual supply operation in SOIC-8.
Key Specifications
| Channels | 2 |
| Supply Voltage | 3V to 32V (single) / +/-1.5 to +/-16V (dual) |
| GBW | 1.1 MHz |
| Slew Rate | 0.6 V/us |
| Vos | 2 mV typical |
| Ib | 20 nA typical |
| Supply Current | 1.5 mA max (both amps) |
| Output Swing | 0V to VCC-1.5V |
| Package | SOIC-8 |
| Operating Temperature | 0 to +70 C |
Features
- Single or dual supply operation
- Input common-mode range includes ground
- Large DC voltage gain (100dB)
- Low supply current drain
- Short-circuit protected outputs
Applications
- Transducer amplifier
- Active filters
- Comparator with reference
- Transducer Amplifier: Single-supply operation with input common-mode range including ground enables direct amplification of ground-referenced sensor signals (thermistors, RTDs, photodiodes)
- DC Gain Blocks: Low offset voltage and 1.1 MHz GBW for general-purpose DC and low-frequency signal amplification in single-supply instrumentation and control systems
- Active Filters: Dual op-amp in single package enables compact second-order active low-pass, high-pass, and band-pass filter implementations with 1.1 MHz bandwidth
- General-Purpose Signal Conditioning: Industry-standard pinout and wide 3 V to 32 V single-supply range for cost-sensitive signal buffering, level shifting, and impedance matching
- Comparator and Oscillator: Open-loop operation as voltage comparator or relaxation oscillator for simple threshold detection and clock generation in control circuits
Product Introduction: LM358DT Product Introduction
The LM358DT from STMicroelectronics is a dual general-purpose bipolar operational amplifier in SOIC-8. It operates from a single supply (3V to 32V) or dual supplies (+/-1.5V to +/-16V), with input common-mode range that includes ground. The 1.1MHz GBW and 0.6V/us slew rate suit low-frequency signal conditioning. The DT suffix denotes SOIC-8 package with commercial temperature range (0 to +70C). The device is pin-compatible with LM324 quad op-amp.
Working Principle: LM358DT Working Principle
The LM358DT operates as a dual bipolar operational amplifier. (1) The input stage uses PNP differential pairs with bias current of 20nA typical. The input common-mode range extends from ground (0V) to VCC-1.5V, enabling single-supply operation with ground-referenced signals without level shifting. (2) The output stage is a class-AB push-pull design that can source 20-40mA and sink 10-20mA. The output swings from near ground (5mV) to VCC-1.5V, providing maximum dynamic range in single-supply applications. (3) The internal compensation capacitor provides stable unity-gain operation without external components. The 1.1MHz GBW and 0.6V/us slew rate are adequate for audio-range signal processing, active filters, and DC gain blocks. The 100dB open-loop gain provides precision amplification for transducer and sensor interfaces.
Pin Description: LM358DT Pin Definition and Functions
| Pin | Name | Description |
|---|---|---|
| 1 | 1OUT | Amplifier 1 output |
| 2 | 1IN- | Amplifier 1 inverting input |
| 3 | 1IN+ | Amplifier 1 non-inverting input |
| 4 | VCC- | Negative supply / ground for single-supply operation (0 V) |
| 5 | 2IN+ | Amplifier 2 non-inverting input |
| 6 | 2IN- | Amplifier 2 inverting input |
| 7 | 2OUT | Amplifier 2 output |
| 8 | VCC+ | Positive supply (3 V to 32 V single, or +/-1.5 V to +/-16 V dual) |
Package: SOIC-8 (D). Dual general-purpose op-amp. GBW: 1.1 MHz. Slew rate: 0.6 V/us. Input bias current: 45 nA (typical at 25 C). Supply current: 0.7 mA per amplifier. Output swing: 0 V to VCC-1.5 V on single supply. Input common-mode range includes ground.
Application Scenarios: In which products and applications is LM358DT used
Alternative Models: What chips are recommended as replacements for LM358DT
| Model | Manufacturer | Key Difference | Package | Specs |
|---|---|---|---|---|
| LM358DR | TI | TI-manufactured equivalent in SOIC-8 with identical dual op-amp and 3-32V single supply | SOIC-8 | 1.1MHz/0.6V/us |
| LM2904DT | ST | Automotive-grade -40 to +125C version with same GBW and input common-mode range | SOIC-8 | 1.1MHz/-40-125C |
| LM324DT | ST | Quad op-amp version (4 channels) in SOIC-14 for multi-stage signal chains | SOIC-14 | 1.1MHz/4-ch |
| MC33172DR2G | onsemi | Dual BiFET op-amp with higher 4.5MHz GBW and lower noise for improved analog performance | SOIC-8 | 4.5MHz/BiFET |
| LM358AVQDR | TI | Automotive AEC-Q100 qualified version with enhanced ESD and -40 to +125C operation | SOIC-8 | 1.1MHz/AEC-Q100 |
The LM358DT is the STMicroelectronics dual general-purpose op-amp in SOIC-8 with 1.1MHz GBW and 3-32V single supply range. Input common-mode range includes ground, making it ideal for single-supply sensor signal conditioning. The LM2904 variant extends temperature range to 125C for automotive applications.
Recommend Parts

TMP275AIDR
0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC
Brand: TI
Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)
IN STOCK: 3681pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFS4227TRLPBF
IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)
Brand: infineon
Package: D2PAK (TO-263)
IN STOCK: 4334pcs
Cargo cycle: 3-7 Days
The minimum order is 1

CD4070BM96
Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14
Brand: TI
Package: SOIC-14 (8.75 x 3.9 x 1.5mm)
IN STOCK: 4245pcs
Cargo cycle: 3-7 Days
The minimum order is 1

LP2980IM5-5.0
50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)
IN STOCK: 2557pcs
Cargo cycle: 3-7 Days
The minimum order is 1








