Opens in a new tab

TPS563201DDCR

3A sync buck, 4.5-17Vin, fixed Vout, SOT-23-6

45000

Effective Inventory

Image for reference only

Manufacturer Part:

TPS563201DDCR

Package:

SOT-23-6 DDC (2.90 x 1.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS563201DDCR from Texas Instruments is a 3A synchronous buck converter with 4.5-17V input, fixed output options, D-CAP2 control in SOT-23-6.

Key Specifications

Input Voltage 4.5V to 17V
Output Current 3A
Output Voltage Fixed (1.05V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V)
Switching Frequency 580 kHz typical
IQ (PNM) 35 uA typical
MOSFET RDS(on) 70/40 mOhm (HS/LS)
Mode ECO (pulse skip at light load)
Package SOT-23-6 (DDC)
Operating Temperature -40 to +125 C (TJ)

Features

  • D-CAP2 control for fast transient response
  • Integrated 70/40mOhm MOSFETs
  • ECO mode for high light-load efficiency
  • Internal soft-start and compensation
  • Only 5 external components needed

Applications

  • Digital TV and set-top box power
  • Networking equipment point-of-load
  • Surveillance systems
  • Blu-ray disc players
Product Introduction: TPS563201DDCR Product Introduction

The TPS563201DDCR from Texas Instruments is a 3A synchronous step-down converter in SOT-23-6 with fixed output voltage options. It accepts 4.5-17V input and provides 1.05V to 5V fixed outputs using D-CAP2 control for fast transient response without external compensation. The integrated 70/40mOhm MOSFETs achieve up to 95% efficiency. ECO mode (pulse skip) maintains high efficiency at light loads with 35uA quiescent current. Internal soft-start and compensation minimize external component count to just 5 parts.

Working Principle: TPS563201DDCR Working Principle

The TPS563201DDCR operates as a synchronous buck converter using D-CAP2 control. (1) D-CAP2 (Direct Control with Adaptive On-time 2nd Gen) uses an adaptive constant on-time modulator with an internal ripple injection circuit. This eliminates the need for output capacitor ESR as a stability requirement and supports all-ceramic output capacitors. The adaptive on-time maintains relatively constant switching frequency. (2) At heavy loads, the converter operates in continuous conduction mode (CCM) at approximately 580kHz. As the load decreases below the critical threshold, the device enters ECO (Economy) mode, skipping pulses to maintain regulation with minimum switching losses. The 35uA quiescent current in ECO mode preserves battery life. (3) The internal soft-start ramps the output voltage gradually over approximately 1ms, limiting inrush current. The internal compensation network is optimized for a wide range of output capacitances (22uF to 200uF ceramic). The enable pin provides logic-controlled on/off with 3uA shutdown current.

Pin Description: TPS563201DDCR Pin Definition and Functions

Package: SOT-23-6 (DDC). Switching frequency: 580 kHz. Operating temperature: -40 C to +125 C. Exposed thermal pad on bottom.

Application Scenarios: In which products and applications is TPS563201DDCR used
  • Digital TV and Set-Top Box POL: Fixed 3.3 V or 5 V point-of-load conversion from 12 V intermediate bus with 95% efficiency and integrated Power Good output
  • Networking Equipment POL: 12 V to 3.3 V/1.8 V power rails for Ethernet switches and routers with fast transient response and ECO-mode light-load efficiency
  • Surveillance System Power: 12 V to 1.05 V or 1.5 V core voltage for video processing DSPs with 3 A output capability in compact SOT-23-6 footprint
  • Blu-ray and Media Players: High-efficiency buck conversion from 12 V adapter with ECO mode maintaining excellent efficiency at light loads for standby power compliance
  • Industrial 12 V Bus Distribution: Deriving low-voltage logic rails from 12 V industrial distribution with 580 kHz switching allowing small 1.5 uH inductor
Alternative Models: What chips are recommended as replacements for TPS563201DDCR
Pin Name Description
1 BOOT Bootstrap capacitor connection; connect 0.1 uF ceramic capacitor to SW pin for high-side driver supply
2 VIN Input supply (4.5 V to 17 V); connect 10 uF ceramic capacitor to GND near the pin
3 EN Enable input; pull above 1.2 V to enable, below 0.4 V to disable; do not float
4 FB Output voltage feedback; connect resistor divider from VOUT to set output (3.3 V or 5 V fixed versions available)
5 GND Ground; connect to PCB ground plane and thermal pad for heat dissipation
6-7 SW Switch node; connect output inductor; minimize copper area for EMI reduction
8 PG Power Good open-drain output; asserts high when output is within 10% of target; can be left floating
Model Manufacturer Key Difference Package Output
TPS563208DDCR TI FCCM (forced CCM) version that eliminates pulse skipping for lower output ripple at light loads SOT-23-6 3A/5V or 3.3V
TPS562201DDCR TI 2A lower-current version with same 580kHz switching and 4.5-17V input range SOT-23-6 2A/5V or 3.3V
TPS564201DDCR TI 4A higher-current version for heavier loads with same pinout and external component selection SOT-23-6 4A/5V or 3.3V
SY8120ABC Silergy 1.5A, 1.5MHz, 4.5-18V synchronous buck in SOT-23-6 with lower 35uA Iq SOT-23-6 1.5A adj
TPS563247DDCR TI Next-gen 3A buck with 1.2MHz switching for smaller inductor and faster transient response SOT-23-6 3A adj

The TPS563201 is a 3A synchronous buck converter in SOT-23-6 with 580kHz switching and 4.5-17V input. The 201/208 suffixes differ in light-load mode (ECO vs FCCM). The 2A (562201) and 4A (564201) variants scale output current while maintaining pin compatibility and identical external component values.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1