Opens in a new tab

TLV1117LV33DCYR

1A LDO, 3.3V, 300mV dropout, SOT-223

28000

Effective Inventory

Image for reference only

Manufacturer Part:

TLV1117LV33DCYR

Package:

SOT-223 (6.50 x 3.50 x 1.60 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TLV1117LV33DCYR from Texas Instruments is a 1A LDO regulator with 3.3V fixed output, 300mV dropout, and 500uA IQ in SOT-223.

Key Specifications

Output Voltage 3.3V fixed
Output Current 1A
Dropout Voltage 300 mV max @ 1A
Input Voltage 2.0V to 5.5V
IQ 500 uA typical
PSRR 68 dB @ 120Hz
Output Cap 10uF ceramic min
Package SOT-223 (DCY)
Operating Temperature -40 to +125 C (TJ)

Features

  • 1A output with 300mV dropout
  • 500uA low quiescent current
  • Stable with 10uF ceramic output cap
  • Internal current and thermal limiting
  • Drop-in compatible with AMS1117

Applications

  • Post-regulation after switching supply
  • 3.3V rail from 5V USB
  • Battery-powered systems
  • FPGA/MCU I/O power
Product Introduction: TLV1117LV33DCYR Product Introduction

The TLV1117LV33DCYR from Texas Instruments is a 1A low-dropout linear regulator with 3.3V fixed output in SOT-223 package. The 300mV maximum dropout at full load enables efficient 5V-to-3.3V conversion. The 500uA quiescent current is significantly lower than legacy 1117 devices (5-10mA), reducing power waste in always-on applications. The device is stable with just 10uF ceramic output capacitance. Pin-compatible with AMS1117 and other standard 1117 LDOs, enabling easy upgrades.

Working Principle: TLV1117LV33DCYR Working Principle

The TLV1117LV33DCYR operates as a low-dropout linear regulator. (1) The PNP pass transistor provides the low 300mV dropout characteristic at 1A. The error amplifier compares the output voltage with an internal bandgap reference and adjusts the pass transistor drive to maintain regulation. The +/-1.5% output accuracy ensures reliable 3.3V logic levels. (2) The 500uA quiescent current is a major improvement over legacy 1117 devices that draw 5-10mA. This reduces power dissipation in battery-powered and always-on applications. The quiescent current is relatively constant across load, simplifying thermal design. (3) The device is stable with just 10uF ceramic output capacitance, eliminating the need for expensive tantalum capacitors. Internal current limiting protects against overload (1.5A typical), and thermal shutdown activates at 165C. The SOT-223 package provides a good thermal path with 15C/W junction-to-case thermal resistance.

Pin Description: TLV1117LV33DCYR Pin Definition and Functions
Pin Name Description
1 IN Unregulated input voltage (2.7 V to 5.5 V); stable with 10 uF ceramic output capacitor
2 GND Ground; connect to PCB ground plane and thermal relief for heat dissipation
3 OUT Regulated 3.3 V output at 1 A; 68 dB PSRR at 120 Hz, low 42 uVrms output noise

Package: SOT-223-3 (DCY). Dropout voltage: 300 mV at 1 A. Quiescent current: 500 uA typical. Output capacitor: 10 uF ceramic minimum.

Application Scenarios: In which products and applications is TLV1117LV33DCYR used
  • 5 V USB to 3.3 V Conversion: Stepping down USB 5 V bus power to 3.3 V with only 300 mV dropout at full 1 A load, ideal for USB-powered MCU and FPGA boards
  • Post-SMPS Linear Regulation: Cascading after a 5 V switching pre-regulator to deliver ultra-clean 3.3 V with 68 dB PSRR for RF and analog front-end circuits
  • Battery-Powered 3.3 V Systems: 500 uA quiescent current enables efficient regulation from single-cell Li-ion (3.6 V to 3.0 V) in portable instrumentation
  • FPGA and MCU I/O Power: Delivering 3.3 V at 1 A for FPGA I/O banks and MCU peripherals with 10 uF ceramic capacitor stability and low 42 uVrms output noise
  • Wearable and IoT Devices: Compact SOT-223 footprint with low dropout enabling direct 3.6 V Li-ion to 3.3 V conversion in space-constrained wearable electronics
Alternative Models: What chips are recommended as replacements for TLV1117LV33DCYR
Model Manufacturer Key Difference Package Output
TLV1117LV50DCYR TI 5.0V output version for 5V logic and USB power rails with same 300mV dropout at 1A SOT-223-3 5.0V fixed
AMS1117-3.3 Advanced Monolithic Budget equivalent with 5mA IQ and higher 1.1V dropout but very low cost and widely available SOT-223-3 3.3V fixed
MC33275DT-3.3RKG onsemi 300mA precision LDO with 260mV dropout and very low 42uVrms output noise SOT-223-3 3.3V fixed
MCP1826T-3302E/DC Microchip 1A anyCAP stable LDO with 210mV dropout and +/-1.5% output accuracy over temperature SOT-223-3 3.3V fixed
ADP3338AKCZ-3.3-R7 ADI 300mA anyCAP LDO with +/-1.1% output accuracy and 75uA ground current SOT-223-3 3.3V fixed

The TLV1117LV33DCYR is a 1A low-dropout regulator with 300mV dropout at full load and 500uA quiescent current. It is stable with only 10uF ceramic output capacitor. The AMS1117-3.3 is a popular low-cost alternative with higher dropout but identical SOT-223-3 pinout (IN-OUT-GND).

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1