Opens in a new tab

Home » Integrated Circuits ICs » MCP4725A0T-E/CH

MCP4725A0T-E/CH

12-bit I2C DAC, EEPROM, RRO, SOT-23-6

18000

Effective Inventory

Image for reference only

Manufacturer Part:

MCP4725A0T-E/CH

Package:

SOT-23-6 (2.90 x 1.60 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP4725A0T-E/CH from Microchip is a 12-bit I2C DAC with EEPROM memory and rail-to-rail output in SOT-23-6.

Key Specifications

Resolution 12-bit
Channels 1
Interface I2C up to 3.4MHz
Supply Voltage 2.7V to 5.5V
Output Swing Rail-to-rail
DNL +/-0.2 LSB typical
Settling Time 6 us typical
EEPROM Yes (stores power-up default)
I2C Address A0 pin selectable (2 addresses)
Package SOT-23-6
Operating Temperature -40 to +125 C

Features

  • 12-bit DAC with non-volatile EEPROM
  • Rail-to-rail output buffer
  • 6us fast settling time
  • 2 selectable I2C addresses
  • Ultra-small SOT-23-6 package

Applications

  • Sensor calibration and bias
  • Setpoint control
  • Motor speed control
  • Waveform generation
Product Introduction: MCP4725A0T-E/CH Product Introduction

The MCP4725A0T-E/CH from Microchip is a single-channel 12-bit voltage output DAC with integrated EEPROM in SOT-23-6. The EEPROM stores the DAC register value, enabling the device to restore its output to a known state on power-up without MCU intervention. The rail-to-rail output buffer drives loads directly without external amplification. The I2C interface supports up to 3.4MHz high-speed mode. The A0 pin provides two selectable I2C addresses for bus sharing. The A0 suffix denotes address 0x62 (A0=GND).

Working Principle: MCP4725A0T-E/CH Working Principle

The MCP4725A0T-E/CH operates as a 12-bit I2C digital-to-analog converter. (1) The 12-bit DAC core uses a resistor-string architecture with a rail-to-rail output buffer. The output voltage is VOUT = VDD x (DAC_CODE / 4096), where DAC_CODE ranges from 0 to 4095. The +/-0.2 LSB DNL ensures monotonic behavior across all codes. (2) The EEPROM stores the DAC register value and configuration bits. On power-up, the device reads the EEPROM and sets the DAC output to the stored value. This is critical for applications requiring known output state before the MCU initializes. Write commands can update the DAC register only (volatile) or both DAC register and EEPROM (non-volatile). (3) The I2C interface supports standard (100kHz), fast (400kHz), and high-speed (3.4MHz) modes. A write command consists of: address byte, command byte (with write type), and 2 data bytes (12-bit DAC value + 4 config bits). The 6us settling time supports fast update rates.

Pin Description: MCP4725A0T-E/CH Pin Definition and Functions
Pin Name Description
1 OUT DAC analog output; rail-to-rail output swings from VSS to VDD, 6 us settling time to 0.5 LSB
2 VSS Ground reference
3 VDD Power supply (2.7 V to 5.5 V); connect 0.1 uF decoupling capacitor
4 SDA I2C serial data; open-drain bidirectional, requires external pull-up resistor
5 SCL I2C serial clock; open-drain input, requires external pull-up resistor; supports 3.4 MHz High-Speed mode
6 A0 I2C address select; connect to VDD or VSS to set LSB of 7-bit address (0x60 or 0x61)

Package: SOT-23-6. Resolution: 12 bits. I2C address: 0x60 (A0=GND) or 0x61 (A0=VDD). Internal EEPROM stores power-on default DAC value.

Application Scenarios: In which products and applications is MCP4725A0T-E/CH used
  • Sensor Calibration and Bias: Providing programmable offset voltage for Wheatstone bridge sensors with EEPROM-stored power-up default eliminating host initialization
  • Setpoint Control: 12-bit resolution voltage setpoint generation for motor speed controllers, LED current regulators, and temperature controllers via I2C interface
  • Waveform Generation: Arbitrary waveform output for test signals and stimulus generation with 6 us settling time and rail-to-rail output swing
  • Process Control Loops: Analog output for 4-20 mA current loop transmitters (with external V-to-I converter) in industrial instrumentation
  • Audio Volume Control: Digitally controlled analog gain setting in portable audio devices with 2-wire I2C interface and SOT-23 footprint
Alternative Models: What chips are recommended as replacements for MCP4725A0T-E/CH
Model Manufacturer Key Difference Package Resolution
MCP4725A1T-E/CH Microchip Alternative I2C address variant (A0=VDD, address 0x63) for dual-DAC bus configurations SOT-23-6 12-bit
DAC60508ZRTJR TI 8-channel 12-bit DAC with SPI interface and internal 2.5V reference in QFN-24 QFN-24 12-bit
AD5667BRMZ-1 ADI Dual 16-bit DAC with I2C interface in MSOP-10 for higher resolution applications MSOP-10 16-bit
MCP4726A0T-E/CH Microchip Next-generation with non-volatile EEPROM and built-in voltage reference in SOT-23-6 SOT-23-6 12-bit
DAC43608DQPWR TI 8-channel 10-bit DAC with I2C, internal reference, and power-down mode in TSSOP-16 TSSOP-16 10-bit

The MCP4725A0T-E/CH is a 12-bit single-channel DAC with I2C interface and EEPROM power-on default in SOT-23-6. Two address variants (A0 suffix: GND=0x60, A1 suffix: VDD=0x63) allow two devices on one bus. For multi-channel needs, the DAC60508 offers 8 channels via SPI.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1