Opens in a new tab

TPS74701DRCR

500mA LDO, 0.8-3.6V adj, 50mV dropout, programmable soft-start, PG output, VSON-10

6933

Effective Inventory

Image for reference only

Manufacturer Part:

TPS74701DRCR

Package:

VSON-10 (3.0 x 3.0 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS74701DRCR is a 500-mA low-dropout (LDO) linear regulator from Texas Instruments with programmable soft-start. It features an ultra-low input voltage range down to 0.8 V, 50 mV typical dropout at 500 mA, and 2% accuracy over line, load, and temperature, packaged in a tiny 3 mm × 3 mm VSON-10.

Key Specifications

Output Current 500 mA
Input Voltage Range 0.8 V to 5.5 V
Bias Voltage Range 2.7 V to 5.5 V
Output Voltage Range 0.8 V to 3.6 V (adjustable)
Dropout Voltage 50 mV (typ) at 500 mA, VBIAS = 5 V
Accuracy 2% over line, load, temperature
Power-Good Output Yes
Programmable Soft-Start Yes, monotonic
Enable Input Yes
Minimum Output Capacitor 2.2 µF (any type)
Operating Temperature -40°C to +125°C
Package VSON-10 (DRC), 3 mm × 3 mm

Features

  • Ultra-low VIN range: 0.8 V to 5.5 V
  • Low dropout: 50 mV typical at 500 mA
  • Programmable soft-start for inrush current control
  • Power-good output for supply monitoring and sequencing
  • Stable with any output capacitor ≥ 2.2 µF
  • VBIAS permits low VIN with good transient response
  • 2% accuracy over all conditions

Applications

  • FPGA and DSP power supplies with special sequencing
  • Network attached storage and rack servers
  • Network interface cards (NIC)
  • Merchant network and server PSU
  • ASIC and processor core voltage regulation
Product Introduction: TPS74701DRCR Product Introduction

The TPS74701 is a 500-mA low-dropout (LDO) linear regulator with programmable soft-start from Texas Instruments. It provides an easy-to-use, robust power management solution for a wide variety of applications. The user-programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic, designed for powering many different types of processors and ASICs. The enable input and power-good output allow easy sequencing with external regulators, meeting the requirements of FPGAs, DSPs, and other applications with special start-up requirements. A precision reference and error amplifier deliver 2% accuracy over load, line, temperature, and process.

Working Principle: TPS74701DRCR Working Principle

The TPS74701 uses a P-channel MOSFET pass transistor controlled by an error amplifier that compares a fraction of the output voltage (via external feedback resistors) to a precision 0.804 V internal reference. The VBIAS supply powers the internal reference and control circuitry independently from VIN, enabling ultra-low VIN operation (down to 0.8 V) while maintaining excellent transient response. The programmable soft-start circuit uses an external capacitor (CSS) to control the output voltage ramp rate, ensuring monotonic start-up and reducing inrush current. The power-good (PG) comparator monitors the output voltage and asserts when regulation is within specified bounds, providing a sequencing signal for other supplies. Current limiting and thermal shutdown protect the device under fault conditions.

Pin Description: TPS74701DRCR Pin Definition and Functions
Pin Name Type Description
1 OUT Power Regulated output voltage
2 OUT Power Regulated output voltage
3 SS Analog Soft-start capacitor connection
4 PG Output Power-good open-drain output
5 BIAS Power Bias supply input (2.7-5.5V)
6 GND Power Ground
7 EN Input Enable input (active high)
8 FB Input Feedback voltage input
9 IN Power Input supply voltage
10 IN Power Input supply voltage
Pad GND Power Thermal pad (connect to GND)
Application Scenarios: In which products and applications is TPS74701DRCR used
  • FPGA/DSP Power Sequencing: Programmable soft-start and PG output enable precise power-up sequencing for multi-rail FPGAs and DSPs
  • Network Servers: Low-VIN operation with VBIAS allows efficient core voltage regulation from sub-1V inputs
  • NIC Power Supplies: Tiny 3×3mm footprint and enable/PG pins fit space-constrained network interface cards
  • ASIC Core Regulation: 2% accuracy and 50mV dropout at 500mA ensure stable core voltage delivery
  • Multi-Rail Sequencing: PG output and EN input support daisy-chain power sequencing with external regulators
Alternative Models: What chips are recommended as replacements for TPS74701DRCR
Model Manufacturer Key Difference Package Specs
TPS74801DRCR TI 1A version, same VSON-10 package – –
TPS7A7001DRCR TI 2A LDO, similar footprint – –
TPS74601DRCR TI 1A, lower noise, same package – –
LT3021EDD ADI 500mA, VLDO, adjustable – –
NCP4681DSQ onsemi 500mA LDO, 0.8V min VIN – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1