Opens in a new tab

MSP430FR2155TDBTR

16-bit ultra-low-power MCU, 32KB FRAM, 4KB SRAM, 12-bit ADC, 142uA/MHz, TSSOP-38

5364

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430FR2155TDBTR

Package:

TSSOP-38 (0.173″, 4.40mm Width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MSP430FR2155TDBTR is a 16-bit ultra-low-power microcontroller from Texas Instruments featuring 32KB FRAM, 4KB SRAM, 12-bit ADC, comparators, and UART/SPI/I2C interfaces in a 38-pin TSSOP package.

Key Specifications

Core MSP430 16-bit RISC
Max Clock Speed 24 MHz
Program Memory 32KB FRAM (non-volatile)
RAM 4KB SRAM
ADC 12-bit, 12-channel, 200 ksps
Comparators 2 enhanced comparators (eCOMP)
Communication 2x UART/IrDA/SPI, 2x SPI/I2C
Supply Voltage 1.8 V to 3.6 V
Active Current 142 µA/MHz
Standby (LPM3) 1.43 µA
Shutdown (LPM4.5) 42 nA
Operating Temperature -40°C to +105°C
Package TSSOP-38 (DBT)

Features

  • FRAM non-volatile memory with 10^15 write cycle endurance
  • Ultra-low power: 142 µA/MHz active, 42 nA shutdown
  • 12-bit ADC with internal shared reference (1.5/2.0/2.5V)
  • Two eCOMP with integrated 6-bit DAC reference
  • Four 16-bit timers with capture/compare
  • 32-bit hardware multiplier (MPY32)
  • Internal 24 MHz DCO with FLL (±1% accuracy)
  • 20KB ROM library with driver libraries and FFT

Applications

  • Smart meters and energy harvesting
  • Portable medical instruments
  • Sensor nodes and IoT endpoints
  • Industrial sensing and control
  • Building automation
Product Introduction: MSP430FR2155TDBTR Product Introduction

The MSP430FR2155 is an ultra-low-power 16-bit microcontroller from Texas Instruments based on the MSP430 RISC architecture with FRAM non-volatile memory. FRAM combines the speed, flexibility, and endurance of SRAM with the non-volatility of Flash, offering 10^15 write cycle endurance and unified memory for program, constants, and data storage. The device features a 12-bit 200 ksps ADC, two enhanced comparators, multiple 16-bit timers, and a 32-bit hardware multiplier. Dual eUSCI_A and eUSCI_B modules provide flexible UART, SPI, and I2C connectivity. The device achieves 142 µA/MHz active current, 1.43 µA LPM3 standby, and 42 nA LPM4.5 shutdown.

Working Principle: MSP430FR2155TDBTR Working Principle

The MSP430FR2155 uses a 16-bit Von Neumann architecture with a constant generator that enables 16-bit instructions in a single cycle. The FRAM memory controller manages read/write operations with ECC protection and configurable write protection. The Power Management Module (PMM) with Supply Voltage Supervisor (SVS) ensures reliable operation across the 1.8-3.6V supply range. The clock system integrates a 24 MHz DCO with FLL achieving ±1% accuracy, plus external crystal and internal low-frequency oscillators. The ADC uses a successive approximation architecture with sample-and-hold, while the eCOMP modules feature programmable hysteresis and integrated 6-bit DAC reference voltage generation. Low-power modes progressively disable clock domains and peripheral power to achieve sub-microamp standby and nanoamp shutdown currents.

Pin Description: MSP430FR2155TDBTR Pin Definition and Functions
Pin Group Function Description
P1.0-P1.7 GPIO/Interrupt Port 1 with interrupt capability and multiple peripheral functions
P2.0-P2.7 GPIO/Interrupt Port 2 with interrupt capability and multiple peripheral functions
P3.0-P3.7 GPIO/Interrupt Port 3 with interrupt capability
P4.0-P4.1 GPIO/Interrupt Port 4 with interrupt capability
DVCC/DVSS Power Digital supply and ground
AVCC/AVSS Power Analog supply and ground (ADC reference)
RST/NMI System Reset / non-maskable interrupt
TEST/SBWTDIO Debug JTAG test / Spy-Bi-Wire data
Application Scenarios: In which products and applications is MSP430FR2155TDBTR used
  • Smart Meters: FRAM endurance supports frequent data logging without wear; ultra-low standby extends battery life to 10+ years
  • Portable Medical: 142 µA/MHz active power and instant FRAM wake-up enable long battery life in glucose monitors and pulse oximeters
  • IoT Sensor Nodes: Integrated 12-bit ADC, comparators, and multiple serial interfaces in a single chip for sensor fusion
  • Industrial Control: -40°C to +105°C operation with FRAM data retention during power loss
  • Building Automation: Low-power modes and RTC enable always-on monitoring with minimal power budget
Alternative Models: What chips are recommended as replacements for MSP430FR2155TDBTR
Model Manufacturer Key Difference Package Specs
MSP430FR2355TDBTR TI With 4 Smart Analog Combo (SAC) op-amps – –
MSP430FR2153TDBTR TI 16KB FRAM, 2KB SRAM (reduced memory) – –
MSP430FR2155TPTR TI 48-pin LQFP package version – –
MSP430FR2433IRGER TI 16KB FRAM, 4KB SRAM, 24-VQFN – –
MSP430FR2633IRHBR TI CapTIvate touch, 32-pin VQFN – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1