Opens in a new tab

LM1085IT-5.0

3A 5V LDO regulator, 1.3V dropout, current limiting, thermal shutdown, TO-220

4882

Effective Inventory

Image for reference only

Manufacturer Part:

LM1085IT-5.0

Package:

TO-220-3 (10.16 x 4.70 x 8.89 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM1085IT-5.0 is a 3A, 5.0V fixed-output low-dropout positive regulator from Texas Instruments with 1.3V typical dropout at full load, current limiting, and thermal shutdown in a TO-220-3 through-hole package.

Key Specifications

Output Voltage 5.0 V (fixed)
Output Current 3 A (maximum)
Dropout Voltage 1.3 V typical, 1.5 V max at 3A
Input Voltage Range 2.6 V to 27 V
Line Regulation 0.015% typical (10 mV max)
Load Regulation 0.1% typical (20 mV max)
Quiescent Current 10 mA max
Output Voltage Tolerance ±2%
Operating Temperature -40°C to +125°C
Package TO-220-3 (NDE)

Features

  • 3A output current capability
  • Low dropout: 1.3V typical at 3A
  • LM317-compatible pinout
  • Zener-trimmed bandgap reference
  • Current limiting and thermal shutdown protection
  • Excellent line and load regulation
  • Available in 3.3V, 5.0V, 12V and adjustable versions

Applications

  • Post-regulation for switching supplies
  • Battery chargers
  • 5V logic power supplies
  • High-current linear regulation
  • Active SCSI terminators
Product Introduction: LM1085IT-5.0 Product Introduction

The LM1085IT-5.0 is a 3A low-dropout positive voltage regulator from Texas Instruments providing a fixed 5.0V output with only 1.3V typical dropout voltage at full 3A load. It features the same pinout as the industry-standard LM317, making it a drop-in upgrade for applications requiring higher output current or lower dropout. The internal circuit includes a zener-trimmed bandgap reference for precise 5.0V output, current limiting for short-circuit protection, and thermal shutdown to prevent damage from excessive junction temperature. The device achieves 0.015% line regulation and 0.1% load regulation for stable output under varying conditions.

Working Principle: LM1085IT-5.0 Working Principle

The LM1085IT-5.0 uses an NPN pass transistor driven by a PNP current source in a Darlington-like configuration, enabling low dropout voltage while maintaining the LM317-compatible pinout. The internal zener-trimmed bandgap reference generates a stable voltage that is compared with a fraction of the output voltage through an integrated voltage divider (since this is a fixed-output version). The error amplifier drives the pass transistor to maintain regulation. Current limiting is implemented by sensing the voltage across an internal sense resistor and reducing the drive to the pass transistor when the limit is reached. Thermal shutdown activates when the junction temperature exceeds approximately 165°C, turning off the output until the device cools. The TO-220 package with exposed tab provides good thermal performance for the 3A output rating.

Pin Description: LM1085IT-5.0 Pin Definition and Functions
Pin Name Type Description
1 ADJ/GND Ground Adjust pin (connected to ground in fixed version)
2 VOUT Output 5.0V regulated output
3 VIN Input Unregulated input supply (6.3V to 27V)
Tab VOUT Output Thermal tab (connected to VOUT, heatsink to GND)
Application Scenarios: In which products and applications is LM1085IT-5.0 used
  • Post-Regulation: Clean 5V output after a switching pre-regulator, eliminating switching noise with low dropout
  • Battery-Powered Systems: 1.3V dropout at 3A enables regulation from 6.3V+ battery sources
  • 5V Logic Supply: Fixed 5.0V output with ±2% tolerance powers TTL and CMOS logic reliably
  • SCSI Terminators: 3A current capability supports active termination of SCSI buses
  • High-Current Linear Supplies: TO-220 with external heatsink delivers full 3A for bench and industrial power supplies
Alternative Models: What chips are recommended as replacements for LM1085IT-5.0
Model Manufacturer Key Difference Package Specs
LM1086IS-3.3 TI 1.5A LDO with 1.3V dropout at 1.5A for higher-current 3.3V logic supply regulation TO-263-3 1.25-37V/1.5A
LM317T TI Adjustable 1.25-37V regulator with same TO-220 package for flexible output voltage TO-220-3 1.25-37V/1.5A
LT1085CT ADI Higher-performance 3A LDO with 1.5V max dropout for demanding power supply designs TO-220-3 1.25-37V/3A
LM1117MP-3.3 TI 800mA SOT-223 version for lower-current 3.3V logic supply in compact designs SOT-223-4 3.3V/800mA
LT1117CST-3.3 ADI 800mA SOT-223 LDO with 1.1V dropout for surface-mount 3.3V regulator applications SOT-223-3 3.3V/800mA

LM1085IT-5.0 is a 3A low-dropout adjustable regulator in TO-220-3 with 1.3V dropout at 3A. It is the higher-current version of the LM317. The LT1085 from ADI offers similar performance. For lower-current surface-mount applications, LM1117 and LT1117 provide 800mA output in SOT-223. All use the standard ADJ-OUT-IN pinout with two-resistor voltage programming.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1