Opens in a new tab

ADM3483ARZ

3.3V RS-485 half-duplex transceiver, 250kbps, ±15kV ESD, 1/4 unit load, SOIC-8

3342

Effective Inventory

Image for reference only

Manufacturer Part:

ADM3483ARZ

Package:

SOIC-8 (3.9 x 4.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADM3483ARZ is a 3.3V low-power RS-485/RS-422 transceiver from Analog Devices with one driver and one receiver, ±15kV ESD protection, half-duplex operation, and 250 kbps data rate in an 8-pin SOIC package.

Key Specifications

Configuration 1 Driver / 1 Receiver (Half-Duplex)
Protocol RS-485 / RS-422
Data Rate 250 kbps
Supply Voltage 3.3 V (single supply)
ESD Protection ±15 kV HBM on bus pins
Driver Output Current ±60 mA
Receiver Input Impedance 96 kΩ (1/4 unit load)
Common-Mode Range -7 V to +12 V
Quiescent Current 2.0 mA max
Shutdown Current 1 nA typ
Operating Temperature -40°C to +85°C
Package SOIC-8 (R)

Features

  • 3.3V single supply operation
  • ±15 kV ESD protection on bus pins
  • 1/4 unit load allows 128 devices on bus
  • Half-duplex with driver/receiver enable
  • Low power: 2 mA quiescent, 1 nA shutdown
  • Fail-safe receiver (open-circuit = logic high)
  • Slew-rate limited for error-free 250 kbps transmission
  • Current limiting and thermal shutdown on driver

Applications

  • Industrial RS-485 networks
  • Building automation (BACnet)
  • Utility metering networks
  • Level translators for RS-485 buses
  • Half-duplex communication links
Product Introduction: ADM3483ARZ Product Introduction

The ADM3483ARZ is a 3.3V low-power RS-485/RS-422 transceiver from Analog Devices with one driver and one receiver configured for half-duplex communication. It features ±15 kV HBM ESD protection on bus pins, 1/4 unit load receiver input impedance allowing up to 128 devices on a single bus, and fail-safe receiver design that outputs logic high when the bus is open or shorted. The driver is slew-rate limited for error-free data transmission up to 250 kbps. The device operates from a single 3.3V supply with only 2 mA quiescent current and 1 nA shutdown current. Current limiting and thermal shutdown protect the driver outputs against bus contention and short circuits.

Working Principle: ADM3483ARZ Working Principle

The ADM3483ARZ uses differential signaling for robust communication over twisted-pair cables. The driver converts single-ended TTL/CMOS logic levels to differential RS-485 signals (±1.5V minimum differential output) with ±60 mA drive current. The receiver converts differential RS-485 signals (±200 mV threshold) back to single-ended logic levels. Slew-rate limiting on the driver output reduces EMI and reflections for clean signal integrity at 250 kbps. The 1/4 unit load receiver impedance (96 kΩ) reduces bus loading, allowing 128 transceivers on one bus compared to 32 with standard unit loads. The fail-safe receiver biases the output high when the differential input is between -200 mV and +200 mV (open, shorted, or idle bus). Driver and receiver enable pins allow the device to be placed in a low-power state with the driver outputs three-stated.

Pin Description: ADM3483ARZ Pin Definition and Functions
Pin Name Type Description
1 RO Output Receiver output
2 RE Input Receiver output enable (active low)
3 DE Input Driver output enable (active high)
4 DI Input Driver data input
5 GND Power Ground
6 A I/O Non-inverting bus pin (driver out / receiver in)
7 B I/O Inverting bus pin (driver out / receiver in)
8 VCC Power Supply voltage (3.3V)
Application Scenarios: In which products and applications is ADM3483ARZ used
  • Industrial RS-485: 128-node bus capability with ±15kV ESD for factory floor communication networks
  • Building Automation: BACnet MS/TP communication over RS-485 at 250 kbps
  • Utility Metering: 3.3V supply and 1/4 unit load enable low-power multi-drop automatic meter reading
  • Half-Duplex Links: DE/RE enable pins support simple half-duplex communication with bus direction control
  • Fail-Safe Systems: Open/short-circuit fail-safe receiver prevents false data on disconnected buses
Alternative Models: What chips are recommended as replacements for ADM3483ARZ
Model Manufacturer Key Difference Package Specs
ADM3485ARZ ADI Same, 16 Mbps data rate – –
SP3485EN-L/TR MaxLinear 3.3V, 10 Mbps, pin-compatible – –
SN65HVD3082EDR TI 3.3V, 200 kbps, 1/8 unit load – –
MAX3485ESA+ ADI 3.3V, 10 Mbps, SOIC-8 – –
ST3485EBDR ST 3.3V, 250 kbps, SOIC-8 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1