Opens in a new tab

Home » Integrated Circuits ICs » AT24C04C-MAHM-T

AT24C04C-MAHM-T

4Kb I2C EEPROM, 512×8, 1MHz, 1M cycles, 8-UDFN 2x3mm

26126

Effective Inventory

Image for reference only

Manufacturer Part:

AT24C04C-MAHM-T

Package:

8-UDFN (2 x 3 mm) Exposed Pad

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AT24C04C-MAHM-T is a 4Kb I2C serial EEPROM from Microchip Technology organized as 512 x 8 bits, supporting 400 kHz (1.7V) and 1 MHz (>2.5V) clock rates with 1 million write cycle endurance and 100-year data retention in an 8-pin UDFN (2x3mm) package.

Key Specifications

Memory Size 4Kbit (512 x 8)
Interface I2C (2-wire)
Max Clock Frequency 1 MHz (>2.5V), 400 kHz (1.7V)
Page Size 16 bytes
Write Cycle Time 5 ms max (self-timed)
Access Time 550 ns
Endurance 1,000,000 write cycles
Data Retention > 100 years
Supply Voltage 1.7 V to 5.5 V
Standby Current 6 µA max
Operating Temperature -40°C to +85°C
Package 8-UDFN (2 x 3 mm) Exposed Pad

Features

  • Dual-speed I2C: 400 kHz at 1.7V, 1 MHz above 2.5V
  • Hardware write-protect pin for data protection
  • Supports up to 4 devices on a single bus
  • Schmitt trigger filtered inputs for noise suppression
  • Self-timed write cycle (5 ms max)
  • 1 million erase/write cycle endurance
  • 100-year data retention
  • Automotive qualified version available

Applications

  • Configuration and calibration storage
  • Industrial and consumer electronics
  • Automotive systems
  • Embedded parameter storage
  • Smart sensors and metering
Product Introduction: AT24C04C-MAHM-T Product Introduction

The AT24C04C-MAHM-T is a 4Kb I2C-compatible serial EEPROM from Microchip Technology organized as 512 x 8 bits. It supports dual-speed operation at 400 kHz from 1.7V supply and 1 MHz above 2.5V, providing flexibility across voltage ranges. The device features a hardware write-protect pin, Schmitt trigger filtered inputs for noise suppression, self-timed write cycles (5 ms max), 1 million write cycle endurance, and greater than 100-year data retention. The compact 8-pin UDFN (2x3mm) package with exposed pad is ideal for space-constrained applications. The device supports up to 4 devices on a single I2C bus via configurable address pins.

Working Principle: AT24C04C-MAHM-T Working Principle

The AT24C04C uses a standard I2C protocol with START, STOP, and ACK conditions for communication. The bus protocol begins with a START condition followed by the device address byte (1010+A2+A1+A0+R/W), where the lower address bits select one of up to 4 devices on the bus. For write operations, the master sends the word address followed by data bytes (up to 16 bytes per page write). The device acknowledges each byte and performs the write internally within 5 ms (self-timed). For read operations, the master writes the address byte then issues a repeated START with the R/W bit set to 1. The device then outputs data bytes sequentially. The Schmitt trigger inputs filter noise on SDA and SCL lines. The hardware write-protect pin (WP) blocks write operations to the entire array when held high, protecting critical data from accidental modification.

Pin Description: AT24C04C-MAHM-T Pin Definition and Functions
Pin Name Type Description
1 A0 Input Address bit 0 (connect to VCC or GND)
2 A1 Input Address bit 1 (connect to VCC or GND)
3 A2 Input Address bit 2 (connect to VCC or GND)
4 GND Power Ground
5 SDA I/O Serial data (open-drain, bidirectional)
6 SCL Input Serial clock input
7 WP Input Write protect (HIGH = write protected)
8 VCC Power Supply voltage (1.7V to 5.5V)
Application Scenarios: In which products and applications is AT24C04C-MAHM-T used
  • Configuration Storage: Non-volatile 4Kb storage for device settings and calibration coefficients with 1M write cycle endurance
  • Industrial Electronics: Wide 1.7V-5.5V operation and Schmitt trigger inputs for noisy industrial environments
  • Automotive Systems: Automotive-grade version available for ECU parameter storage in -40°C to +125°C environments
  • Smart Sensors: Compact UDFN package fits alongside sensor ICs for on-board calibration data storage
  • Multi-Device Bus: 4 addressable devices per bus allows distributed EEPROM across system modules
Alternative Models: What chips are recommended as replacements for AT24C04C-MAHM-T
Model Manufacturer Key Difference Package Specs
AT24C08C-MAHM-T Microchip 8Kbit (1024×8), same package – –
AT24C04C-SSHM-T Microchip Same, 8-SOIC package – –
24AA04-I/MC Microchip 4Kb, TSSOP-8, older series – –
BR24G04FVT-WE2 ROHM 4Kb I2C EEPROM, TSSOP-8 – –
CAT24C04WI-GT3 onsemi 4Kb I2C EEPROM, TSSOP-8 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1