Opens in a new tab

MAX3232ESE+

3.0-5.5V dual RS-232 transceiver, ±15kV ESD, 250kbps, SOIC-16

7650

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3232ESE+

Package:

SOIC-16 (narrow, 3.9 x 9.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX3232ESE+ is a 3.0V to 5.5V dual RS-232 transceiver from Analog Devices with ±15 kV ESD protection, two drivers and two receivers, 250 kbps data rate, and 300 µA typical supply current in a 16-pin SOIC package.

Key Specifications

Configuration 2 Drivers / 2 Receivers
Protocol TIA/EIA-232-F, ITU V.28
Data Rate 250 kbps (up to 1 Mbps in MegaBaud mode)
Supply Voltage 3.0 V to 5.5 V
ESD Protection ±15 kV HBM, ±15 kV IEC air-gap, ±8 kV IEC contact
Supply Current 300 µA typical (unloaded)
External Capacitors 4 x 0.1 µF
Driver Output Slew Rate 30 V/µs max
Operating Temperature -40°C to +85°C
Package SOIC-16 (narrow)

Features

  • Operates from single 3.0V to 5.5V supply
  • Integrated dual charge pump (4 external capacitors)
  • ±15 kV ESD protection on all RS-232 pins
  • Low supply current: 300 µA typical
  • 5V logic input with 3.3V supply
  • Pin compatible with industry-standard MAX232
  • Fail-safe receiver: open input = logic high
  • Outputs protected against shorts to ground

Applications

  • Industrial PCs and wired networking
  • Battery-powered systems and handheld devices
  • Data center and enterprise computing
  • Notebook and palmtop computers
  • Embedded RS-232 communication
Product Introduction: MAX3232ESE+ Product Introduction

The MAX3232ESE+ is a dual RS-232 transceiver from Analog Devices consisting of two line drivers, two line receivers, and a dual charge-pump circuit with ±15 kV IEC ESD protection on all RS-232 pins. It meets TIA/EIA-232-F and ITU V.28 standards, providing the electrical interface between asynchronous communication controllers and serial-port connectors. The charge pump and four 0.1 µF external capacitors enable operation from a single 3.0V to 5.5V supply. The device supports data rates up to 250 kbps with a maximum driver output slew rate of 30 V/µs. It accepts 5V logic inputs with a 3.3V supply and features fail-safe receiver outputs that go high when inputs are open.

Working Principle: MAX3232ESE+ Working Principle

The MAX3232ESE+ uses an internal dual charge pump to generate the positive and negative supply voltages required for RS-232 signal levels from a single 3.0-5.5V supply. The first charge pump doubles VCC to create V+ (approximately +5.5V), and the second inverts V+ to create V- (approximately -5.5V). These generated voltages power the driver outputs, which swing between +5.5V and -5.5V to meet the RS-232 specification of ±3V minimum with 5 kOhm load. The receivers convert RS-232 input levels (±3V to ±15V) to TTL/CMOS output levels. A 5 kOhm pulldown resistor on each receiver input ensures the output goes high when the input is open (fail-safe). The ESD protection structures on RS-232 pins use SCR-based clamping to absorb transient energy up to ±15 kV per IEC 61000-4-2 without latchup.

Pin Description: MAX3232ESE+ Pin Definition and Functions
Pin Name Type Description
1 C1+ Passive Positive terminal of voltage doubler capacitor
2 V+ Power +5.5V output from charge pump
3 C1- Passive Negative terminal of voltage doubler capacitor
4 C2+ Passive Positive terminal of inverting capacitor
5 C2- Passive Negative terminal of inverting capacitor
6 V- Power -5.5V output from charge pump
7 DOUT2 Output RS-232 driver 2 output
8 RIN2 Input RS-232 receiver 2 input
9 ROUT2 Output TTL/CMOS receiver 2 output
10 DIN2 Input TTL/CMOS driver 2 input
11 DIN1 Input TTL/CMOS driver 1 input
12 ROUT1 Output TTL/CMOS receiver 1 output
13 RIN1 Input RS-232 receiver 1 input
14 DOUT1 Output RS-232 driver 1 output
15 GND Power Ground
16 VCC Power Supply voltage (3.0V to 5.5V)
Application Scenarios: In which products and applications is MAX3232ESE+ used
  • Embedded RS-232: Industry-standard dual transceiver adds serial ports to any 3.3V or 5V microcontroller system
  • Industrial PCs: ±15 kV ESD protection withstands electrostatic discharge from frequently connected serial cables
  • Battery-Powered Devices: 300 µA supply current and charge pump operation from 3.0V minimize battery drain
  • Legacy Interface: Converts modern 3.3V logic to RS-232 levels for communication with older equipment and test instruments
  • Data Center Equipment: Reliable serial management interface with IEC ESD protection for server and networking equipment
Alternative Models: What chips are recommended as replacements for MAX3232ESE+
Model Manufacturer Key Difference Package Specs
MAX232CPE ADI 5V-only original version with 2Tx/2Rs and 120kbps rate in DIP-16 for legacy 5V systems DIP-16 120kbps/5V
SP3232EBCN-L/TR Silicon Labs 3.3V/5V equivalent with auto-powerdown and ±15kV ESD protection on bus pins DIP-16 250kbps/3-5.5V
ST3232EBPR ST 3-5.5V RS-232 with enhanced ±15kV IEC ESD and low 300µA supply current TSSOP-16 250kbps/3-5.5V
TRS3232EIPWR TI Pin-compatible 3-5.5V RS-232 with 1µA auto-powerdown and ±15kV HBM ESD rating TSSOP-16 250kbps/3-5.5V
MAX3243CAI+T ADI 3Tx/5Rs triple-channel version for multi-port serial applications in SSOP-28 SSOP-28 250kbps/3-5.5V

MAX3232ESE is a 3.3-5.5V dual RS-232 transceiver in SOIC-16 with 2Tx/2Rx, 250kbps data rate, and ±15kV ESD protection. It replaces the 5V-only MAX232 for mixed-voltage systems. SP3232 and ST3232 are pin-compatible alternatives. Only four 0.1µF charge pump capacitors are required (vs 1µF for MAX232). For single-port designs, MAX3221 provides 1Mbps in a smaller package.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1