Opens in a new tab

TPS2557DRBR

Adjustable current-limited power switch, 0.5-5A, 50mOhm, USB compliant, VSSOP-8

10200

Effective Inventory

Image for reference only

Manufacturer Part:

TPS2557DRBR

Package:

VSSOP-8 (3.0 x 3.0 mm, HRI package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS2557DRBR is a precision adjustable current-limited power-distribution switch from Texas Instruments with 0.5A to 5A current limit range, 50 mOhm RDS(ON), and USB 2.0 compliance in an 8-pin VSSOP package.

Key Specifications

Current Limit Range 0.5 A to 5 A (adjustable via external resistor)
Current Limit Accuracy ±6% at 2A setting
RDS(ON) 50 mOhm typical
Input Voltage Range 2.5 V to 6.5 V
UVLO Threshold 2.2 V (falling)
Enable Input Active high, compatible with 1V logic
Fault Reporting Open-drain FAULT output
Thermal Shutdown Auto-retry after thermal fault
Reverse Current Blocking Yes (when disabled)
Operating Temperature -40°C to +125°C
Package VSSOP-8 (3.0 x 3.0 mm)

Features

  • Precision adjustable current limit: 0.5A to 5A
  • Low 50 mOhm RDS(ON) MOSFET switch
  • USB 2.0 compliant with 500 mA and 900 mA settings
  • Auto-retry thermal shutdown protection
  • Reverse current blocking when disabled
  • Open-drain fault reporting output
  • 1V logic-compatible enable input
  • Undervoltage lockout (UVLO)

Applications

  • USB power distribution
  • Hot-plug power supplies
  • Laptop and notebook USB ports
  • Industrial power distribution
  • Battery-powered load switches
Product Introduction: TPS2557DRBR Product Introduction

The TPS2557DRBR is a precision adjustable current-limited power-distribution switch from Texas Instruments featuring an N-channel MOSFET with 50 mOhm on-resistance and programmable current limit from 0.5A to 5A via an external resistor. The device meets USB 2.0 current limit requirements and provides comprehensive protection including thermal shutdown with auto-retry, undervoltage lockout, and reverse current blocking when the switch is disabled. The open-drain FAULT output reports overcurrent and thermal fault conditions. The 1V logic-compatible enable input allows direct interface with low-voltage microcontrollers. The device operates from 2.5V to 6.5V in the compact VSSOP-8 package suitable for USB port protection and general power distribution applications.

Working Principle: TPS2557DRBR Working Principle

The TPS2557 uses an N-channel MOSFET as the main pass element, driven by an internal charge pump that ensures the gate voltage is sufficient for low RDS(ON) even at the minimum 2.5V input. The current limit circuit senses the MOSFET current and compares it against a reference set by the external RILIM resistor. When the current exceeds the limit, the control loop reduces the gate drive to regulate the current at the set limit, rather than immediately shutting off. This provides a constant-current limiting behavior that allows the output to recover when the overload is removed. If the current-limit condition persists and causes excessive power dissipation, the thermal shutdown activates at approximately 140°C and the switch turns off. After the junction cools by approximately 20°C, the switch automatically retries, cycling on and off until the fault clears. The FAULT open-drain output pulls low during overcurrent and thermal fault conditions.

Pin Description: TPS2557DRBR Pin Definition and Functions
Pin Name Type Description
1 OUT Power Switch output (connects to load)
2 ILIM Analog Current limit set (connect resistor to GND)
3 GND Power Ground
4 EN Input Enable (active high, 1V logic compatible)
5 FAULT Output Fault indicator (open-drain, active low)
6 NC – No connect
7 IN Power Switch input (2.5-6.5V)
8 OUT Power Switch output (connected to pin 1 internally)
Application Scenarios: In which products and applications is TPS2557DRBR used
  • USB Port Protection: Adjustable 0.5-5A current limit meets USB 2.0 500mA/900mA requirements with ±6% accuracy
  • Hot-Plug Supplies: Current limiting and thermal shutdown protect against inrush current and short circuits during hot-plug events
  • Laptop USB Ports: 50 mOhm RDS(ON) minimizes voltage drop; FAULT output enables port status reporting to host controller
  • Industrial Distribution: Reverse current blocking prevents backfeed when a powered port is disabled or input voltage drops
  • Battery Load Switches: 1V-compatible enable input and 2.5V minimum operation suit single-cell Li-Ion powered systems
Alternative Models: What chips are recommended as replacements for TPS2557DRBR
Model Manufacturer Key Difference Package Specs
TPS2556DRBR TI Fixed 1.1A current limit version – –
TPS2552DRVR TI 0.5-1.5A range, SOT-23-6, smaller – –
TPS2549RTER TI USB charging port controller + switch – –
FDC6327L onsemi Load switch, smaller current range – –
AP2145SG-13 Diodes Inc Adjustable current limit, SOT-23-6 – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1