Opens in a new tab

FAN3227TMX

Dual 2A high-speed low-side gate driver with MillerDrive technology, 4.5V-18V, 8-SOIC, matched propagation delay <=2ns

8532

Effective Inventory

Image for reference only

Manufacturer Part:

FAN3227TMX

Package:

8-SOIC (3.90 mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

FAN3227TMX — Dual 2A High-Speed Low-Side Gate Driver

1. Component Overview

The FAN3227TMX is a dual 2A high-speed, low-side gate driver manufactured by onsemi (formerly Fairchild Semiconductor). It is designed to drive N-channel enhancement-mode MOSFETs in low-side switching applications by providing high peak current pulses during short switching intervals. The device features TTL input thresholds, dual non-inverting channels with independent enable pins, and incorporates onsemi’s proprietary MillerDrive™ architecture for optimal switching performance.

The FAN3227 provides matched internal propagation delays between channels A and B (within 1 ns), making it ideal for synchronous rectifier applications. Channels can be paralleled to effectively double the drive current. The device is available in an 8-lead SOIC package and is rated for operation from –40°C to +125°C.

2. Key Specifications

Parameter Value
Manufacturer onsemi
Part Number FAN3227TMX
Component Type Dual Low-Side Gate Driver
Driver Configuration Low-Side, Non-Inverting
Number of Channels 2 (Dual independent + Enable)
Supply Voltage (VDD) 4.5V to 18V
Peak Output Current (Sink/Source) 3A / 3A (at VDD = 12V)
Continuous Output Current 2.4A Sink / 1.6A Source (at VOUT = 6V)
Input Threshold TTL Compatible
Rise Time (typical) 12 ns (at 1 nF load)
Fall Time (typical) 9 ns (at 1 nF load)
Propagation Delay (typical) 19 ns (turn-on) / 18 ns (turn-off)
Channel-to-Channel Delay Matching ≤ 2 ns
Under-Voltage Lockout (UVLO) Yes (integrated)
Package 8-SOIC (3.90 mm width)
Mounting Type Surface Mount (SMT)
Operating Temperature –40°C to +125°C
ESD Protection (HBM) ±2 kV
MSL Rating MSL 1 — Unlimited
Packing Tape & Reel (2,500 units/reel)
RoHS Compliant Yes

3. Pin Configuration & Package

Package: 8-Lead SOIC (3.90 mm width)

Pin No. Pin Name Function
1 ENA Enable Input for Channel A (active HIGH, defaults ON if floating)
2 INA Non-Inverting Input for Channel A
3 GND Ground Reference
4 ENB Enable Input for Channel B (active HIGH, defaults ON if floating)
5 INB Non-Inverting Input for Channel B
6 VDD Supply Voltage (4.5V – 18V)
7 OUTA Gate Drive Output A
8 OUTB Gate Drive Output B

4. Features & Functional Description

  • MillerDrive™ Technology: Bipolar-MOSFET output stage provides high current during the Miller plateau region of MOSFET switching, minimizing switching losses while delivering rail-to-rail voltage swing and reverse current capability.
  • Matched Propagation Delays: Channel-to-channel delay matching within 1–2 ns ensures precise timing for synchronous rectification and paralleled driver configurations.
  • Dual Independent Enable: Each channel has its own enable pin with TTL thresholds. Enable pins default to ON when left unconnected, thanks to internal pull-up resistors.
  • Under-Voltage Lockout (UVLO): Internal circuitry holds the output LOW until VDD rises above the operating threshold, preventing incomplete MOSFET turn-on.
  • Internal Input Resistors: If inputs are left unconnected, internal 100 kΩ resistors pull inputs LOW, ensuring outputs remain LOW and MOSFETs stay off.
  • Paralleled Output Capability: Channels A and B can be connected in parallel to double the peak drive current for a single MOSFET.
  • Wide Supply Range: 4.5V to 18V operation covers most power supply rail voltages.

5. Typical Applications

  • AC-DC Power Supplies: Server and workstation power supplies requiring fast, efficient MOSFET switching.
  • Synchronous Rectifiers: Matched channel delays enable precise dead-time control.
  • DC-DC Converters: Low-side drive for buck, boost, and flyback topologies.
  • Motor Drive Circuits: Half-bridge and H-bridge low-side switching.
  • Solenoid & Relay Drivers: High peak current for fast turn-on/turn-off of inductive loads.
  • LED Lighting Drivers: PWM-controlled MOSFET switching in LED drivers.
  • Automotive Electronics: AEC-Q100 qualified versions (F085 suffix) available for automotive applications.

6. Equivalent & Alternative Parts

Part Number Manufacturer Description Key Differences
FAN3226TMX onsemi Dual inverting + Enable version Inverting logic; otherwise identical specs
FAN3228TMX onsemi Dual inputs, FAN3225x-compatible pinout Dual input per channel (inverting + non-inverting)
FAN3229TMX onsemi Dual inputs, TPS2814D-compatible pinout Alternative pinout for TPS2814D drop-in
TC1427 Microchip Dual 1.5A low-side gate driver Lower peak current (1.5A), wider voltage range
UCC27424 Texas Instruments Dual 4A high-speed low-side driver Higher peak current (4A), similar package
IR4427 Infineon Dual 1.8A low-side gate driver Slightly lower current, different pinout
MCP1407 Microchip Dual 3A high-speed low-side driver Comparable current, similar application range

7. Design Recommendations

  • Place a 0.1 µF ceramic bypass capacitor as close as possible to the VDD–GND pins for high-frequency noise decoupling.
  • Use short, wide PCB traces between the driver outputs and MOSFET gates to minimize parasitic inductance and ringing.
  • For paralleled channel operation, add small gate resistors (1–10 Ω) in series with each output to balance current sharing.
  • When driving MOSFETs with high gate charge, verify that the driver can deliver sufficient average current at the target switching frequency.
  • If the application requires automotive-grade reliability, specify the F085-suffixed variant (FAN3227TMX-F085), which is AEC-Q100 qualified.
  • Enable pins can be left unconnected for always-on operation; connect to a logic signal for power-saving shutdown control.
Product Introduction: FAN3227TMX Product Introduction

The FAN3227TMX is a dual 2A high-speed low-side gate driver from onsemi (formerly Fairchild Semiconductor). It features the proprietary MillerDrive architecture for optimal MOSFET switching performance with rail-to-rail output swing and reverse current capability. The device provides dual non-inverting channels with independent enable pins, matched channel-to-channel propagation delay within 2ns, and TTL-compatible input thresholds.

Key features include integrated under-voltage lockout (UVLO), internal 100k input pull-down resistors, and the ability to parallel channels for doubled drive current. The 8-lead SOIC package and -40C to +125C operating range make it suitable for AC-DC power supplies, synchronous rectifiers, DC-DC converters, motor drives, and LED lighting applications.

Working Principle: FAN3227TMX Working Principle

The FAN3227TMX operates as a low-side gate driver that provides high peak current pulses to drive N-channel MOSFETs. Its MillerDrive output stage uses a bipolar-MOSFET combination to deliver enhanced current during the Miller plateau region of MOSFET switching, minimizing switching losses.

Signal Path: TTL-compatible input signals pass through level-shifting circuitry to drive the push-pull output stage. Each channel has an independent enable pin with internal pull-up (defaults ON when floating).

Protection: Integrated UVLO holds the output LOW until VDD exceeds the operating threshold. Internal 100k pull-down resistors on inputs ensure outputs remain LOW when inputs are unconnected.

Current Delivery: The output stage sources up to 1.6A and sinks up to 2.4A continuously (at VOUT=6V), with peak currents of 3A at VDD=12V. Rise time is 12ns and fall time is 9ns (at 1nF load). Channels can be paralleled with small gate resistors (1-10 ohm) for current sharing.

Pin Description: FAN3227TMX Pin Definition and Functions
Pin Name Function
1 ENA Enable Input Channel A (active HIGH, defaults ON if floating)
2 INA Non-Inverting Input Channel A
3 GND Ground Reference
4 ENB Enable Input Channel B (active HIGH, defaults ON if floating)
5 INB Non-Inverting Input Channel B
6 VDD Supply Voltage (4.5V to 18V)
7 OUTA Gate Drive Output A
8 OUTB Gate Drive Output B
Application Scenarios: In which products and applications is FAN3227TMX used
  • AC-DC Power Supplies: Server and workstation power supplies requiring fast, efficient MOSFET switching for synchronous rectification.
  • DC-DC Converters: Low-side drive for buck, boost, and flyback topologies with 4.5V-18V supply range.
  • Synchronous Rectifiers: Matched channel delays (<=2ns) enable precise dead-time control.
  • Motor Drive Circuits: Half-bridge and H-bridge low-side switching with high peak current for fast turn-on/turn-off.
  • LED Lighting: PWM-controlled MOSFET switching in LED drivers with paralleled channel capability.
Alternative Models: What chips are recommended as replacements for FAN3227TMX
Model Manufacturer Key Difference Package Specs
FAN3226TMX onsemi Dual inverting + Enable Inverting logic; otherwise identical – –
UCC27424 Texas Instruments Dual 4A high-speed driver Higher peak current (4A) – –
MCP1407 Microchip Dual 3A low-side driver Comparable current, similar application – –
IR4427 Infineon Dual 1.8A low-side driver Slightly lower current, different pinout – –
TC1427 Microchip Dual 1.5A low-side driver Lower peak current, wider voltage range – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1