Opens in a new tab

LM35DZ/NOPB

Precision analog temperature sensor, 10mV/°C, 0-100°C, TO-92, no calibration needed

7150

Effective Inventory

Image for reference only

Manufacturer Part:

LM35DZ/NOPB

Package:

TO-92 (5.21 x 4.19 x 5.34mm, 3-pin)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM35DZ/NOPB is a precision centigrade temperature sensor from Texas Instruments providing a linear 10mV/°C analog output, operating from 4V to 30V supply in a TO-92 through-hole package rated for 0°C to +100°C.

Key Specifications

Output Type Analog voltage proportional to °C
Scale Factor 10 mV/°C
Accuracy (at 25°C) ±0.5°C typical, ±0.9°C guaranteed
Accuracy (over range) ±0.75°C typical
Nonlinearity ±0.25°C typical
Supply Voltage 4V to 30V
Supply Current 60 µA typical
Output Impedance 0.1Ω at 1mA load
Self-Heating 0.08°C in still air
Operating Temperature 0°C to +100°C (LM35D)
Package TO-92 (3-pin, through-hole)

Features

  • Directly calibrated in degrees Celsius
  • Linear +10mV/°C output scale factor
  • 0.5°C accuracy guaranteed at 25°C
  • No external calibration required
  • Low output impedance: 0.1Ω at 1mA
  • Supply Current 60 µA typical, low self-heating
  • Operates from single 4V to 30V supply
  • Suitable for remote sensing applications

Applications

  • HVAC and environmental monitoring
  • Battery management systems
  • Power supply thermal protection
  • Home appliances and consumer electronics
  • Industrial automation and control
Product Introduction: LM35DZ/NOPB Product Introduction

The LM35DZ/NOPB is a precision integrated-circuit temperature sensor from Texas Instruments whose output voltage is linearly proportional to the Celsius temperature. The LM35D variant provides a 0°C to +100°C operating range with ±0.5°C typical accuracy at 25°C. The device outputs 10mV per degree Celsius, requiring no external calibration. It operates from a single 4V to 30V supply and draws only 60µA, resulting in very low self-heating of just 0.08°C in still air. The low 0.1Ω output impedance allows direct interface with ADCs or control circuits without buffering. The TO-92 package is ideal for through-hole mounting in applications where ease of prototyping and thermal contact are priorities.

Working Principle: LM35DZ/NOPB Working Principle

The LM35DZ/NOPB uses a pair of transistors operating at different current densities to generate a voltage proportional to absolute temperature (PTAT). Two identical NPN transistors are biased at a 10:1 current ratio, producing a ΔVBE of (kT/q)·ln(10) ≈ 59.16µV/°C. This small PTAT voltage is amplified by an internal precision amplifier to produce the 10mV/°C output. The gain is laser-trimmed at wafer level during manufacturing to achieve ±0.5°C accuracy without user calibration. The output buffer provides the low 0.1Ω output impedance, allowing the device to drive capacitive loads and ADC inputs without instability. The 60µA supply current flows primarily through the bias network and amplifier, and the small die size results in minimal self-heating. For basic temperature sensing, only a single supply and output connection are needed; for negative temperature measurement, a pull-down resistor can be added to the output to sink current below ground.

Pin Description: LM35DZ/NOPB Pin Definition and Functions
Pin Name Type Description
1 V+ Power Supply voltage input (4V-30V)
2 Vout Analog Output Temperature-proportional output (10mV/°C)
3 GND Power Ground connection
Application Scenarios: In which products and applications is LM35DZ/NOPB used
  • HVAC Monitoring: Linear 10mV/°C output interfaces directly with MCU ADCs for thermostat and climate control
  • Battery Management: Low 60µA supply current minimizes battery drain; ±0.5°C accuracy protects against thermal runaway
  • Power Supply Protection: Simple analog output triggers shutdown circuits when temperature exceeds threshold
  • Consumer Appliances: No calibration required simplifies manufacturing; TO-92 package is easy to mount on heatsinks
  • Educational Projects: Simple 3-pin interface and linear output make it ideal for Arduino and maker projects
Alternative Models: What chips are recommended as replacements for LM35DZ/NOPB
Model Manufacturer Key Difference Package Specs
LM35CZ/NOPB TI -40°C to +110°C range, higher accuracy – –
LM35CAZ/NOPB TI ±0.2°C accuracy at 25°C, premium grade – –
TMP36GT9Z ADI 0.5V offset, -40°C to +125°C, SOT-23 – –
MCP9700T-E/TT Microchip 500mV offset, -40°C to +125°C, SOT-23 – –
LMT86DCKT TI -50°C to +150°C, SC-70, lower cost – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1