Opens in a new tab

AD7541AKNZ

12-bit multiplying CMOS DAC, R-2R, 4-quadrant, 0.6µs settling, 18-pin PDIP

2340

Effective Inventory

Image for reference only

Manufacturer Part:

AD7541AKNZ

Package:

PDIP-18 (22.86 x 6.35 x 3.3mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AD7541AKNZ is a 12-bit monolithic multiplying CMOS DAC from Analog Devices with R-2R ladder architecture, 12-bit linearity, TTL/CMOS compatible inputs, and 0.6µs settling time in an 18-pin PDIP package.

Key Specifications

Resolution 12 bits
Architecture R-2R ladder, current output
Linearity (K-grade) ±0.012% of FSR (±1/2 LSB)
Settling Time 0.6 µs to 0.1% of FSR (max)
Gain Error ±3 LSB max at 25°C (K-grade)
Supply Voltage +5V to +15V
Power Dissipation 20 mW typical
Input Resistance 10 kΩ typical (R-2R network)
Reference Input Range -10V to +10V
Multiplication 4-quadrant
Data Interface Parallel (12-bit)
Operating Temperature 0°C to +70°C
Package 18-pin PDIP (through-hole)

Features

  • 12-bit linearity with endpoint accuracy (±1/2 LSB for K-grade)
  • Full 4-quadrant multiplication capability
  • All parts guaranteed monotonic to 12 bits
  • TTL/CMOS compatible digital inputs
  • Latch-up free design (no protection Schottky diodes needed)
  • Low logic input leakage current: ±1µA max
  • Low power dissipation: 20mW typical
  • Internal feedback resistor for easy output amplifier connection

Applications

  • Waveform generators and function generators
  • Programmable amplifiers and attenuators
  • Digitally controlled calibration circuits
  • Programmable filters and oscillators
  • Analog signal processing and instrumentation
Product Introduction: AD7541AKNZ Product Introduction

The AD7541AKNZ is a 12-bit monolithic multiplying digital-to-analog converter from Analog Devices using a thin-film R-2R ladder network on CMOS. The K-grade provides the highest accuracy with ±1/2 LSB integral nonlinearity and ±3 LSB gain error at 25°C. The device supports full 4-quadrant multiplication when used with an external operational amplifier, allowing the analog output to be scaled by both the digital code and the reference voltage polarity. The 0.6µs settling time enables high-speed signal generation. The internal RFEEDBACK resistor simplifies output amplifier connection by matching the R-2R ladder resistance. The latch-up free CMOS design eliminates the need for external protection Schottky diodes that were required on the original AD7541.

Working Principle: AD7541AKNZ Working Principle

The AD7541AKNZ uses a 12-bit R-2R thin-film resistor ladder network with NMOS SPDT switches to implement the DAC function. Each bit of the 12-bit digital input controls a switch that connects the corresponding ladder node to either the IOUT1 bus (bit=1) or the IOUT2 bus (bit=0). The current flowing through each ladder arm is weighted by the R-2R network: the MSB carries half the total current, and each subsequent bit carries half the previous. The total output current at IOUT1 is the sum of all selected weighted currents, proportional to the digital input code and the reference voltage. For unipolar operation, the IOUT1 pin connects to the inverting input of an external op-amp, and the internal RFEEDBACK resistor (matched to the 10kΩ ladder resistance) provides the feedback path. For 4-quadrant multiplication, both IOUT1 and IOUT2 connect to op-amps in a bipolar configuration, allowing the reference voltage to be either polarity. The thin-film resistors are laser-trimmed at wafer level to achieve the ±1/2 LSB linearity of the K-grade. The low 20mW power dissipation results from the CMOS switches consuming almost no static power.

Pin Description: AD7541AKNZ Pin Definition and Functions
Pin Name Type Description
1-4 BIT 1-4 Digital Input MSB through bit 4 (TTL/CMOS)
5 VREF IN Analog Input Reference voltage input (-10V to +10V)
6 IOUT2 Analog Output Complementary current output (connect to GND or op-amp)
7 IOUT1 Analog Output Main current output (connect to op-amp inverting input)
8 GND Power Ground
9 BIT 5 Digital Input Bit 5 data input
10-12 BIT 6-8 Digital Input Bits 6 through 8
13-16 BIT 9-12 Digital Input Bits 9 through 12 (LSB)
17 RFEEDBACK Analog Output Internal feedback resistor (connect to op-amp output)
18 V+ Power Positive supply (+5V to +15V)
Application Scenarios: In which products and applications is AD7541AKNZ used
  • Waveform Generation: 4-quadrant multiplication and 0.6µs settling enable arbitrary waveform synthesis with positive and negative reference
  • Programmable Gain: Digital code controls the gain applied to the VREF input, implementing digitally programmable amplifiers/attenuators
  • Calibration Circuits: 12-bit monotonicity and ±1/2 LSB linearity provide precise digital trim for offset and gain calibration
  • Programmable Filters: Multiplying capability allows real-time filter coefficient adjustment by changing the digital input code
  • Instrumentation: R-2R ladder provides well-defined output impedance; internal RFEEDBACK simplifies op-amp interface
Alternative Models: What chips are recommended as replacements for AD7541AKNZ
Model Manufacturer Key Difference Package Specs
AD7541AJNZ ADI J-grade, ±1 LSB linearity, lower cost – –
AD7541AKRZ ADI K-grade in 18-pin SOIC (surface mount) – –
AD7537KNZ ADI Dual 12-bit DAC, 24-pin DIP – –
DAC7541AGL TI 12-bit, voltage output, SOIC-16 – –
MCP4922-E/P Microchip Dual 12-bit, SPI, PDIP-14 – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1