Opens in a new tab

TPS74801DRCR

1.5A LDO, 0.8-3.6V adj, 60mV dropout, soft-start, PG, VSON-10 (3x3mm)

6410

Effective Inventory

Image for reference only

Manufacturer Part:

TPS74801DRCR

Package:

10-VSON (3 x 3 x 1mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS74801DRCR is a 1.5A low-dropout linear regulator from Texas Instruments with adjustable 0.8V to 3.6V output, 60mV typical dropout, programmable soft-start, and power-good output in a 10-pin VSON (3x3mm) package.

Key Specifications

Output Voltage Range 0.8V to 3.6V (adjustable)
Maximum Output Current 1.5A
Input Voltage Range 0.8V to 5.5V
Bias Voltage Range 2.7V to 5.5V
Dropout Voltage 60mV typical, 165mV max at 1.5A
Reference Voltage 804mV (0.5% initial accuracy)
Output Accuracy 1.3% over line, load, and temperature
Quiescent Current 1mA typical
PSRR 50dB at 1kHz, 30dB at 300kHz
Output Noise 20µVrms
Soft Start Programmable via external capacitor
Operating Temperature -40°C to +125°C
Package 10-VSON (3 x 3 x 1mm)

Features

  • Ultra-low 60mV dropout at 1.5A with 5V bias
  • Input voltage as low as 0.8V with separate bias supply
  • Programmable soft-start for monotonic voltage ramp
  • Power-good open-drain output for sequencing
  • Internal 833Ω output pulldown when disabled
  • Stable with only 2.2µF ceramic output capacitor
  • Thermal shutdown, overcurrent, and UVLO protection
  • 1.3% accuracy over line, load, and temperature

Applications

  • FPGA and ASIC core power
  • Post-regulation for DC-DC converters
  • Processor power supply sequencing
  • Low-voltage point-of-load regulation
  • Noise-sensitive analog and RF loads
Product Introduction: TPS74801DRCR Product Introduction

The TPS74801DRCR is a 1.5A low-dropout linear regulator from Texas Instruments designed for very low input voltage and ultra-low dropout applications. The adjustable output ranges from 0.8V to 3.6V with 1.3% accuracy. A separate bias input (2.7V-5.5V) powers the internal control circuitry, enabling the main input to operate as low as 0.8V while maintaining excellent transient performance. The dropout voltage is only 60mV typical at 1.5A with a 5V bias supply. Programmable soft-start via an external capacitor ensures monotonic startup and controlled inrush current. The power-good output monitors the output voltage for sequencing downstream supplies. An internal 833Ω pulldown resistor discharges the output when the device is disabled.

Working Principle: TPS74801DRCR Working Principle

The TPS74801DRCR uses a PMOS pass element with a separate bias supply architecture. The BIAS pin (2.7V-5.5V) powers the error amplifier, bandgap reference, and gate driver, while the IN pin (0.8V-5.5V) supplies the load current through the PMOS pass transistor. This separation allows the input voltage to drop to within 60mV of the output while the bias supply maintains sufficient gate drive for the PMOS. The error amplifier compares the feedback voltage (set by external resistor divider on the FB pin) with the 804mV internal reference, adjusting the gate drive to maintain regulation. The programmable soft-start circuit uses an external capacitor on the SS pin to control the reference voltage ramp rate, ensuring monotonic startup without overshoot. The power-good comparator drives the PG open-drain output when VOUT exceeds 90% of the nominal value. When disabled via EN pin, the internal 833Ω pulldown resistor discharges the output capacitor. Thermal shutdown at 165°C and current limiting at 2A minimum protect the device from fault conditions.

Pin Description: TPS74801DRCR Pin Definition and Functions
Pin Name Type Description
1 OUT Power Regulated output (0.8V-3.6V, up to 1.5A)
2 OUT Power Regulated output (0.8V-3.6V, up to 1.5A)
3 SS Input Soft-start capacitor connection to GND
4 PG Output Power-good open-drain output
5 EN Input Enable input (active high)
6 BIAS Power Bias supply (2.7V-5.5V)
7 GND Power Ground and thermal pad
8 IN Power Input supply (0.8V-5.5V)
9 IN Power Input supply (0.8V-5.5V)
10 FB Input Feedback voltage (connect external resistor divider)
Application Scenarios: In which products and applications is TPS74801DRCR used
  • FPGA Core Power: 0.8V minimum VIN and 60mV dropout efficiently regulate 1.0V-1.2V core rails from 1.5V-1.8V intermediate supplies
  • Power Sequencing: PG output and programmable soft-start control the power-up order for multi-rail processors
  • Post-DC/DC Regulation: 20µVrms noise and 50dB PSRR clean switching converter ripple for noise-sensitive loads
  • Low-Voltage POL: Separate bias architecture maintains performance even when VIN approaches VOUT
  • Monotonic Startup: Programmable soft-start ensures voltage rises monotonically, meeting processor startup requirements
Alternative Models: What chips are recommended as replacements for TPS74801DRCR
Model Manufacturer Key Difference Package Specs
TPS74801DRCRG4 TI Green/RoHS compliant variant – –
TPS74801RGWR TI Same in VQFN-20 (5x5mm) package – –
TPS7A4700RGWR TI 1A, ultra-low noise (3.8µVrms), higher PSRR – –
NCP59748MN1ADJTBG onsemi 1.5A LDO, adjustable, similar specs – –
ISL8015IRTAJZ Renesas 1.5A LDO, 2.2V-6V input, DFN-8 – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1