Opens in a new tab

LM7805CT

1A fixed 5V positive regulator, 7-35V input, TO-220, thermal protection

18500

Effective Inventory

Image for reference only

Manufacturer Part:

LM7805CT

Package:

TO-220 (10.67 x 9.04 x 4.57mm, 3-pin through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM7805CT is a 1A positive voltage regulator from onsemi/TI providing a fixed 5V output with 2V typical dropout, thermal overload protection, and short-circuit current limiting in a TO-220 package.

Key Specifications

Output Voltage 5V fixed (±2% at 25°C)
Output Current 1A (with adequate heatsinking)
Input Voltage Range 7V to 35V
Dropout Voltage 2V typical at 1A
Line Regulation 0.01%/V typical
Load Regulation 10mV typical (5mA to 1.5A)
Quiescent Current 4.2mA typical
Ripple Rejection 80dB typical at 120Hz
Output Noise 40µVrms typical
Thermal Shutdown 150°C typical
Short Circuit Current 750mA typical (current limited)
Operating Temperature 0°C to +125°C
Package TO-220 (3-pin, through-hole)

Features

  • Fixed 5V output with ±2% tolerance at 25°C
  • 1A output current with proper heatsinking
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Output transistor safe area compensation
  • 80dB ripple rejection at 120Hz
  • No external components required for basic operation
  • Industry-standard 7805 pinout

Applications

  • 5V logic power supplies
  • Microcontroller and digital circuit power
  • Post-regulation for switching supplies
  • Bench and laboratory power supplies
  • Automotive and battery chargers
Product Introduction: LM7805CT Product Introduction

The LM7805CT is the industry-standard 5V positive voltage regulator, one of the most widely used linear regulators in electronics. It provides a fixed 5V output at up to 1A with only two external bypass capacitors required. The internal thermal shutdown at 150°C protects against overheating, while the short-circuit current limiting at 750mA typical prevents damage from output faults. The 80dB ripple rejection at 120Hz makes it effective for post-regulating rectified AC or switching converter outputs. The TO-220 package allows heatsinking for higher power dissipation. With over 40 years in production, the LM7805 remains the go-to solution for simple 5V power supplies.

Working Principle: LM7805CT Working Principle

The LM7805CT uses a series pass transistor (NPN Darlington) controlled by an error amplifier that compares a fraction of the output voltage with an internal bandgap reference. The error amplifier drives the base of the pass transistor to maintain the output at 5V. The series pass element dissipates power equal to (VIN – VOUT) × ILOAD as heat, requiring a heatsink for high differential voltages or load currents. The thermal shutdown circuit monitors the junction temperature and turns off the pass transistor when it exceeds approximately 150°C, preventing damage. The current-limiting circuit senses the output current through a small series resistor and reduces the drive to the pass transistor when the current exceeds approximately 750mA. Safe area protection reduces the current limit as the input-output voltage differential increases, keeping the pass transistor within its safe operating area (SOA). The 80dB ripple rejection is achieved by the high gain of the error amplifier, which suppresses input ripple at 120Hz by a factor of 10,000. The quiescent current of 4.2mA flows through the internal bias network and is delivered to the load rather than wasted.

Pin Description: LM7805CT Pin Definition and Functions
Pin Name Type Description
1 INPUT Power Unregulated input voltage (7V-35V)
2 GND Power Ground (common, tab)
3 OUTPUT Power Regulated 5V output
Application Scenarios: In which products and applications is LM7805CT used
  • 5V Logic Power: Fixed 5V output directly powers TTL, CMOS, and MCU circuits from 9V or 12V sources
  • Post-Regulation: 80dB ripple rejection cleans switching converter output for noise-sensitive analog circuits
  • Bench Supplies: TO-220 with heatsink provides reliable 5V at 1A for prototyping and test fixtures
  • Automotive: 7-35V input range tolerates automotive battery voltage for 5V accessory power
  • Educational: Simplest possible regulator circuit (2 capacitors + LM7805) teaches linear regulation fundamentals
Alternative Models: What chips are recommended as replacements for LM7805CT
Model Manufacturer Key Difference Package Specs
LM7805ACT onsemi Tighter output tolerance: ±2% vs ±4% for precision power supply applications TO-220-3 0.5V/1A
L7805CV STMicroelectronics Direct equivalent with 1.5A output current, internal thermal shutdown and current limiting TO-220-3 0.5V/1.5A
MC7805CTG onsemi Current production replacement with identical electrical specifications and RoHS compliance TO-220-3 0.5V/1A
KA7805 onsemi/Fairchild Budget-friendly version with ±4% tolerance and standard 1A output current rating TO-220-3 0.5V/1A
MC7805ABD2TG onsemi Surface-mount DPAK version with ±2% A-grade tolerance for compact PCB layouts DPAK-3 0.5V/1A
LM2940CT-0.5 TI Low-dropout version with 0.5V max dropout at 1A for battery-powered and automotive systems TO-220-3 0.5V/1A LDO

LM7805CT is a 0.5V fixed positive voltage regulator in TO-220-3 with 1A output and ±4% tolerance. The ACT suffix offers ±2% precision. For surface-mount designs, use MC7805ABD2TG (DPAK). For battery-powered systems, the LM2940CT-0.5 LDO version reduces dropout to 0.5V. All 7805 variants are pin-compatible (IN-GND-OUT) and require only input/output capacitors.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1