Opens in a new tab

MOC3021M

Zero-crossing triac driver optocoupler, 400V, 7500V isolation, DIP-6

11600

Effective Inventory

Image for reference only

Manufacturer Part:

MOC3021M

Package:

DIP-6 (7.62 x 6.35 x 5.08mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MOC3021M is a zero-crossing triac driver optocoupler from onsemi/Fairchild with 400V blocking voltage, 530mA LED trigger current, and 7500V peak isolation in a 6-pin DIP package.

Key Specifications

Output Device Triac driver (zero-crossing)
Peak Blocking Voltage 400V
LED Trigger Current (IFT) 5mA typical, 15mA max
LED Forward Voltage 1.15V typical at 10mA
On-State RMS Current 100mA max
Isolation Voltage 7500V peak
Zero-Crossing Voltage 20V max (inhibit voltage)
dv/dt Immunity 10V/µs min
Current Transfer Ratio N/A (triac output)
Operating Temperature -40°C to +85°C
Package DIP-6 (7.62 x 6.35mm, through-hole)

Features

  • Zero-crossing detector reduces EMI and inrush current
  • 400V peak blocking voltage for 240VAC operation
  • 7500V peak isolation between input and output
  • 5mA typical LED trigger current
  • Zero-voltage crossing inhibits turn-on near peak AC
  • High dv/dt immunity: 10V/µs minimum
  • UL recognized and VDE approved
  • Directly drives 25A power triacs

Applications

  • Solid-state relay (SSR) circuits
  • AC motor speed control
  • AC lamp dimming and on/off control
  • Heater and temperature control
  • Industrial process control
Product Introduction: MOC3021M Product Introduction

The MOC3021M is a zero-crossing triac driver optocoupler from onsemi designed for interfacing microcontrollers to AC power loads. It combines a GaAs infrared LED optically coupled to a zero-crossing triac driver chip. The zero-crossing detector ensures the triac turns on only when the AC voltage is near zero, minimizing inrush current and reducing electromagnetic interference. The 400V peak blocking voltage supports direct operation from 240VAC mains. The 7500V isolation voltage provides safe galvanic separation between the low-voltage control circuit and the high-voltage AC line. The 5mA typical trigger current is compatible with most MCU GPIO outputs. The output can directly drive gate currents of power triacs rated up to 25A.

Working Principle: MOC3021M Working Principle

The MOC3021M consists of a GaAs infrared LED optically coupled to a silicon detector chip that integrates a zero-crossing detector and a triac driver. When the LED is forward-biased, infrared light falls on the detector, turning on the zero-crossing detector circuit. The zero-crossing detector monitors the voltage across the main triac terminals (pins 4 and 6). If the AC line voltage is below approximately 20V (near zero crossing), the detector allows the driver triac to fire, applying gate current to the external power triac. If the AC voltage is above the zero-crossing threshold, the driver is inhibited until the next zero crossing. This zero-crossing turn-on minimizes the rate of change of current (di/dt) in the load, reducing EMI and stress on the power triac. The 7500V isolation between the LED and the triac driver is achieved through the optical coupling path, which has no electrical connection. The driver triac is designed with high dv/dt immunity (10V/µs min) to prevent false triggering from fast voltage transients on the AC line. The LED trigger current of 5mA typical at room temperature increases at lower temperatures, requiring 15mA guaranteed trigger current over the full temperature range.

Pin Description: MOC3021M Pin Definition and Functions
Pin Name Type Description
1 Anode Input LED anode (connect via resistor to MCU)
2 Cathode Input LED cathode (connect to MCU GND)
3 NC — No connect
4 Main Terminal Output Triac driver main terminal (connect to power triac gate)
5 NC — No connect
6 Main Terminal Output Triac driver main terminal (connect to AC line via resistor)
Application Scenarios: In which products and applications is MOC3021M used
  • Solid-State Relays: 7500V isolation and zero-crossing turn-on create safe, EMI-compliant AC relay for MCU-controlled switching
  • AC Motor Control: Zero-crossing switching extends triac life in motor start/stop applications by reducing thermal stress
  • Lamp Dimming: MOC3021 (non-zero-crossing variant) supports phase-angle dimming; MOC3021M suits on/off switching
  • Heater Control: Zero-crossing eliminates EMI that could interfere with sensitive temperature measurement circuits
  • Industrial PLC Outputs: 5mA trigger current directly driven by PLC digital output; 400V blocking handles 240VAC mains
Alternative Models: What chips are recommended as replacements for MOC3021M
Model Manufacturer Key Difference Package Specs
MOC3020M onsemi Non-zero-crossing version, phase-angle control – –
MOC3041M onsemi Zero-crossing, 400V, same function – –
MOC3061M onsemi Zero-crossing, 600V blocking voltage – –
MOC3081M onsemi Zero-crossing, 800V blocking voltage – –
VO2223A-X001 Vishay Zero-crossing, 800V, integrated power triac – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1