Opens in a new tab

MCP2551-I/SN

CAN transceiver, ISO-11898, 1Mbps, slope control, ±12V CMV, SOIC-8

9800

Effective Inventory

Image for reference only

Manufacturer Part:

MCP2551-I/SN

Package:

SOIC-8 (4.9 x 3.9 x 1.5mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP2551-I/SN is a high-speed CAN transceiver from Microchip Technology implementing the ISO-11898 standard with 1Mbps data rate, ±12V common-mode range, and slope control in an 8-pin SOIC package.

Key Specifications

Standard ISO-11898 (CAN 2.0A/B)
Data Rate 1 Mbps maximum
Supply Voltage 4.5V to 5.5V
Common-Mode Range -12V to +12V
Bus Pins Voltage Range -24V to +18V (survive faults)
Slope Control Yes (via RS pin)
Standby Current 20µA typical
Short-Circuit Protection Yes (to ±18V on CANH/CANL)
Number of Nodes Up to 112 on one bus
Operating Temperature -40°C to +85°C (I-grade)
Package SOIC-8 (4.9 x 3.9mm)

Features

  • ISO-11898 standard compliant CAN transceiver
  • 1Mbps maximum data rate
  • Automatic slope control via RS pin for reduced EMI
  • ±12V common-mode input range
  • Bus pins withstand -24V to +18V fault voltages
  • Short-circuit protection on CANH and CANL
  • Thermal shutdown protection
  • Up to 112 nodes on single CAN bus

Applications

  • Automotive CAN bus networks
  • Industrial CAN-based communication
  • Building automation systems
  • Medical equipment interconnects
  • Marine and avionics CAN networks
Product Introduction: MCP2551-I/SN Product Introduction

The MCP2551-I/SN is a high-speed CAN (Controller Area Network) transceiver from Microchip Technology that provides the physical interface between a CAN protocol controller and the physical bus. It complies with the ISO-11898 standard, supporting data rates up to 1Mbps. The device features automatic slope control via the RS pin to reduce EMI at lower data rates, ±12V common-mode range for noise immunity in automotive environments, and bus fault protection from -24V to +18V. Short-circuit protection and thermal shutdown ensure robustness in harsh environments. The I-grade operates from -40°C to +85°C, suitable for automotive and industrial applications. Up to 112 nodes can connect to a single CAN bus.

Working Principle: MCP2551-I/SN Working Principle

The MCP2551-I/SN translates the TTL-level CAN protocol signals (TXD, RXD) to and from the differential CAN bus signals (CANH, CANL). When the CAN controller drives TXD low (dominant state), the transceiver drives CANH high (≈3.5V) and CANL low (≈1.5V), creating a 2V differential voltage on the bus. When TXD is high (recessive state), both CANH and CANL are biased to approximately 2.5V through internal resistors, creating a near-zero differential voltage. The receiver continuously monitors the bus differential voltage and drives RXD low when the differential exceeds the dominant threshold (approximately 0.9V). The RS (slope control) pin adjusts the output slew rate: connecting RS to ground enables high-speed mode (1Mbps), connecting via a resistor sets intermediate slew rates for EMI reduction at lower data rates, and connecting RS to VDD places the device in standby mode (20µA current). The ±12V common-mode range allows reliable reception even when ground shifts between nodes in automotive systems. The bus fault protection circuitry uses series resistance and clamping to survive miswiring and short-circuit conditions.

Pin Description: MCP2551-I/SN Pin Definition and Functions
Pin Name Type Description
1 TXD Input Transmit data input (from CAN controller)
2 VSS Power Ground
3 VDD Power Supply voltage (4.5V-5.5V)
4 RXD Output Receive data output (to CAN controller)
5 VREF Output Reference voltage output (VDD/2 ≈ 2.5V)
6 CANL I/O CAN bus low line
7 CANH I/O CAN bus high line
8 RS Input Slope control / standby mode select
Application Scenarios: In which products and applications is MCP2551-I/SN used
  • Automotive CAN: ±12V CMV and fault protection handle ground shifts and transients in vehicle CAN networks
  • Industrial CAN: 1Mbps data rate supports CANopen and DeviceNet protocols for factory automation
  • EMI-Sensitive Designs: Slope control via RS resistor reduces bus slew rate to minimize radiated emissions
  • Multi-Node Networks: 112-node capability and standard compliance ensure interoperability with any CAN controller
  • Low-Power Modes: 20µA standby current via RS pin enables battery-backed CAN nodes in always-on systems
Alternative Models: What chips are recommended as replacements for MCP2551-I/SN
Model Manufacturer Key Difference Package Specs
MCP2551T-I/SN Microchip Tape and reel version – –
MCP2561-E/SN Microchip CAN FD (5Mbps), pin compatible, SOIC-8 – –
SN65HVD230DR TI 3.3V CAN transceiver, SOIC-8 – –
TJA1050T NXP 1Mbps CAN, SOIC-8, pin compatible – –
TJA1042T NXP CAN FD, 5Mbps, VIO pin for level shifting – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1