Opens in a new tab

LM2576S-5.0

3A SIMPLE SWITCHER buck regulator, 7-40V input, fixed 5V output, 52kHz, TO-263-5

8920

Effective Inventory

Image for reference only

Manufacturer Part:

LM2576S-5.0

Package:

TO-263-5 (D2PAK, 10.16 x 8.42 x 4.83mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2576S-5.0 is a SIMPLE SWITCHER 40V, 3A step-down voltage regulator from Texas Instruments with fixed 5V output, 52kHz switching frequency, in a TO-263-5 surface-mount package.

Key Specifications

Output Voltage 5V fixed (±4% over line and load)
Input Voltage Range 7V to 40V
Output Current 3A
Switching Frequency 52kHz fixed
Quiescent Current 5mA typical (50µA standby)
Efficiency 77% typical (VIN=12V, VOUT=5V, IOUT=3A)
Topology Buck (step-down), voltage-mode PWM
Shutdown Yes (ON/OFF pin, TTL compatible)
Protection Cycle-by-cycle current limit, thermal shutdown
Operating Temperature -40°C to +125°C (junction)
Package TO-263-5 (D2PAK, surface-mount)

Features

  • Fixed 5V output with ±4% accuracy, no external divider needed
  • Only 4 external components required
  • 3A output current with internal power switch
  • 52kHz fixed-frequency oscillator
  • TTL-compatible ON/OFF shutdown with 50µA standby
  • Cycle-by-cycle current limit and thermal shutdown
  • Industry-standard SIMPLE SWITCHER pinout
  • Surface-mount D2PAK package for automated assembly

Applications

  • 5V logic power from 12V or 24V input
  • Efficient linear regulator replacement
  • Automotive and battery-powered systems
  • Industrial and telecom point-of-load
  • Distributed power architectures
Product Introduction: LM2576S-5.0 Product Introduction

The LM2576S-5.0 is a fixed 5V output version of the SIMPLE SWITCHER family from Texas Instruments, providing a complete 3A step-down switching regulator requiring only 4 external components. The fixed 5V output eliminates the need for an external resistor divider, simplifying the design. The device operates from 7V to 40V input with 52kHz fixed switching frequency. Internal features include cycle-by-cycle current limiting, thermal shutdown, and output transistor safe-area compensation. The TTL-compatible ON/OFF pin allows shutdown with only 50µA standby current. The surface-mount TO-263-5 (D2PAK) package is ideal for automated PCB assembly.

Working Principle: LM2576S-5.0 Working Principle

The LM2576S-5.0 uses a fixed-frequency voltage-mode PWM control scheme identical to the adjustable version but with an internal resistor divider that sets the output to 5V. The FB pin is internally connected to the junction of two precision resistors that divide the 5V output down to the 1.23V reference level. When the output voltage is above the setpoint, the error amplifier reduces the switch duty cycle, decreasing the output voltage. When below the setpoint, the duty cycle increases. The internal NPN Darlington switch handles up to 3A output current with a saturation voltage of approximately 1.5V at full load. The external catch diode (Schottky recommended for efficiency) provides a current path during the switch off-time. Under overload conditions, cycle-by-cycle current limiting caps the peak switch current at approximately 4.5A. Under short-circuit conditions, the switching frequency drops to approximately 11kHz to prevent inductor saturation. The thermal shutdown activates at approximately 170°C junction temperature.

Pin Description: LM2576S-5.0 Pin Definition and Functions
Pin Name Type Description
1 VIN Power Input supply (7V-40V), bypass with 100µF
2 OUTPUT Power Switch output (connect to inductor and diode)
3 GND Power Ground (tab is also GND)
4 FEEDBACK Input Feedback (connect directly to output for fixed 5V)
5 ON/OFF Input Shutdown control (low=on, high=shutdown)
Application Scenarios: In which products and applications is LM2576S-5.0 used
  • 5V Logic Power: Fixed 5V output directly powers TTL, CMOS, and MCU from 12V or 24V without external divider
  • Automotive 12V to 5V: 40V input handles load dump; 3A output powers navigation, telematics, and ECU logic
  • Industrial 24V to 5V: 77% efficiency and minimal heatsink replace bulky linear regulators in DIN-rail supplies
  • Battery Systems: 50µA standby via ON/OFF pin extends battery life in portable and backup systems
  • Distributed Power: Simple 4-component solution generates local 5V rail from higher-voltage distribution bus
Alternative Models: What chips are recommended as replacements for LM2576S-5.0
Model Manufacturer Key Difference Package Specs
LM2576S-5.0/NOPB TI RoHS compliant version – –
LM2576T-5.0 TI TO-220 through-hole version – –
LM2576HVS-5.0 TI HV version, 60V input max – –
LM2676-5.0 TI 260kHz, higher efficiency (94%), TO-263 – –
LMR33630ADDAR TI 3A, 1MHz synchronous, QFN, modern replacement – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1