Opens in a new tab

L78L08ACZ

100mA fixed 8V positive regulator, 10.5-30V input, TO-92, A-grade ±2%

8300

Effective Inventory

Image for reference only

Manufacturer Part:

L78L08ACZ

Package:

TO-92 (5.21 x 4.19 x 5.34mm, 3-pin through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The L78L08ACZ is a 100mA positive voltage regulator from STMicroelectronics providing fixed 8V output with thermal shutdown and short-circuit protection in a TO-92 through-hole package.

Key Specifications

Output Voltage 8V fixed (±2% at 25°C, A-grade)
Output Current 100mA (with adequate heatsinking)
Input Voltage Range 10.5V to 30V
Dropout Voltage 1.7V typical at 100mA
Line Regulation 20mV typical
Load Regulation 5mV typical (1mA to 100mA)
Quiescent Current 3mA typical
Ripple Rejection 45dB typical at 120Hz
Thermal Shutdown 150°C typical
Short-Circuit Current 200mA typical
Operating Temperature -40°C to +125°C (A-grade)
Package TO-92 (3-pin through-hole)

Features

  • Fixed 8V output with ±2% tolerance (A-grade)
  • 100mA output current capability
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • Output transistor safe-area compensation
  • No external components required for basic operation
  • TO-92 package for through-hole and prototyping
  • Direct replacement for 78L08 and LM78L08

Applications

  • Local 8V regulation in analog circuits
  • Op-amp and comparator power supply
  • Instrumentation and measurement
  • Relay and solenoid driver supply
  • Low-power logic power
Product Introduction: L78L08ACZ Product Introduction

The L78L08ACZ is a 100mA positive linear voltage regulator from STMicroelectronics providing a fixed 8V output in a TO-92 through-hole package. The A-grade offers ±2% output voltage tolerance at 25°C over the -40°C to +125°C industrial temperature range. It requires only input and output bypass capacitors for operation. Internal protection includes thermal shutdown at 150°C and short-circuit current limiting at approximately 200mA. The 8V output is commonly used for dual-supply op-amp circuits (±8V) and specialized analog applications. The TO-92 package is ideal for low-power applications and prototyping.

Working Principle: L78L08ACZ Working Principle

The L78L08ACZ uses a series pass transistor controlled by an error amplifier that compares a fraction of the output voltage (via an internal resistor divider set for 8V) with an internal bandgap reference. The error amplifier drives the base of the NPN pass transistor to maintain the output at 8V. The series pass element dissipates (VIN – VOUT) × ILOAD as heat, requiring adequate PCB copper or heatsinking at higher input-output differentials. The thermal shutdown circuit monitors junction temperature and turns off the pass transistor at approximately 150°C. The current-limiting circuit senses output current and reduces the drive when it exceeds approximately 200mA. Safe area protection reduces the current limit as the input-output voltage differential increases. The 45dB ripple rejection at 120Hz suppresses input ripple by a factor of approximately 178:1. The 3mA quiescent current flows through the internal bias network and is delivered to the output rather than wasted.

Pin Description: L78L08ACZ Pin Definition and Functions
Pin Name Type Description
1 OUTPUT Power Output Regulated 8V DC output at up to 100mA continuous current with ±4% A-grade tolerance (±2% available in premium grades). Minimum load current is not required for stability. Output noise is typically 60µVrms (10Hz-100kHz bandwidth). Bypass with 0.01µF ceramic capacitor to improve transient response.
2 GND Ground Common ground reference. In TO-92 package, the center pin and the tab are both GND. This pin serves as both electrical ground and the primary thermal path to the PCB. For best thermal performance, connect to large copper pour on PCB.
3 INPUT Power Input Unregulated input voltage ranging from 10.5V to 30V (minimum input = Vout + Vdropout ≈ 10.5V). Dropout voltage is 1.7V typical at 40mA output current. Bypass with 0.33µF ceramic capacitor to GND when input supply is more than 4 inches from the regulator.

L78L08ACZ pin assignment (TO-92-3, flat face toward you, pins down): Pin 1 (left) = OUTPUT, Pin 2 (center) = GND, Pin 3 (right) = INPUT. WARNING: 78Lxx has OUTPUT on Pin 1 and INPUT on Pin 3, which is OPPOSITE to the larger 78xx TO-220 where Input is Pin 1. This is a common source of design errors. Always verify pinout against the specific datasheet before PCB layout. The A suffix denotes ±4% tolerance; C suffix = ±8%.

Application Scenarios: In which products and applications is L78L08ACZ used
  • Op-Amp Supply: 8V output suitable for single-supply op-amp circuits and dual ±8V analog rails
  • Instrumentation: ±2% accuracy and low output noise provide stable reference for measurement circuits
  • Relay Drivers: 100mA output directly drives 8V relay coils with short-circuit protection
  • Local Regulation: TO-92 package allows point-of-load regulation near sensitive analog circuits
  • Prototyping: 3-pin through-hole package and zero external components simplify breadboard circuits
Alternative Models: What chips are recommended as replacements for L78L08ACZ
Model Manufacturer Key Difference Package Specs
LM78L08ACZ TI TI equivalent 8V/100mA positive regulator in TO-92 with ±4% tolerance for low-power rails TO-92-3 8V/100mA
MC78L08ACDR2G onsemi Surface-mount SOIC-8 version of 8V/100mA regulator for compact PCB assembly SOIC-8 8V/100mA
LM7808CT onsemi 1A full-current version in TO-220 for applications requiring more than 100mA output TO-220-3 8V/1A
LM317LZ TI Adjustable 1.25-37V/100mA version in TO-92 for custom output voltage low-power rails TO-92-3 1.25-37V/100mA
TLV70033DDCR TI 3.3V/300mA modern LDO in SOT-23-5 with 200mV dropout for battery-powered designs SOT-23-5 3.3V/300mA

L78L08ACZ is an 8V/100mA fixed positive voltage regulator in TO-92-3 with ±4% A-grade tolerance. It is the low-power version of the 7808, ideal for reference and bias supply rails. For surface-mount, MC78L08ACDR2G (SOIC-8) provides identical functionality. For adjustable output at 100mA, LM317LZ offers 1.25-37V range in the same TO-92-3 package.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1