Opens in a new tab

ADUM1410ARWZ

Quad digital isolator, 3750VRMS, 1Mbps, >25kV/µs CMTI, iCoupler, SOIC-16W

3600

Effective Inventory

Image for reference only

Manufacturer Part:

ADUM1410ARWZ

Package:

SOIC-16 Wide (10.5 x 7.6 x 2.35mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ADUM1410ARWZ is a quad-channel digital isolator from Analog Devices using iCoupler technology, providing 3750VRMS isolation, 1Mbps data rate, and >25kV/µs CMTI in a 16-pin SOIC-W package.

Key Specifications

Number of Channels 4 (all same direction, ADUM1410)
Isolation Voltage 3750 VRMS (1 minute per UL 1577)
Data Rate 0Mbps to 1Mbps (NRZ)
Propagation Delay 100ns max
Pulse Width Distortion 40ns max
CMTI >25kV/µs
Supply Voltage 2.7V to 5.5V (each side independently)
Supply Current (per channel) 1.3mA max at 2Mbps, 5V
Operating Temperature -40°C to +105°C
Safety Ratings UL 1577, CSA, VDE, TÜV
Package SOIC-16 Wide (7.5mm width)

Features

  • 4 independent isolation channels in one package
  • iCoupler magnetic isolation (no LEDs, no degradation)
  • 3750VRMS isolation rated per UL 1577
  • Low power: 1/10 to 1/6 of optocoupler power consumption
  • >25kV/µs common-mode transient immunity
  • Bidirectional communication and 3V/5V level translation
  • Programmable default output state via CTRL pin
  • Patented refresh circuit ensures DC correctness

Applications

  • SPI interface isolation for ADCs and DACs
  • RS-485/RS-232 transceiver isolation
  • Industrial fieldbus isolation
  • Medical equipment isolation barriers
  • Power supply feedback loop isolation
Product Introduction: ADUM1410ARWZ Product Introduction

The ADUM1410ARWZ from Analog Devices is a quad-channel digital isolator based on iCoupler technology that replaces optocouplers with superior performance and reliability. It provides 3750VRMS galvanic isolation with up to 1Mbps data rate per channel. Unlike optocouplers, iCoupler devices use chip-scale air-core transformers for magnetic coupling, eliminating the LED degradation and uncertain current transfer ratio problems. The device consumes 1/10 to 1/6 the power of equivalent optocouplers. Independent 2.7V to 5.5V supplies on each side enable voltage level translation across the isolation barrier. A patented refresh circuit ensures DC correctness even without input transitions. The CTRL pin defines the output default state when input power is lost. The ADUM1410 has all 4 channels in the same direction, making it ideal for SPI isolation (4 signals: CLK, CS, MOSI, MISO can be covered with one device plus one reverse channel).

Working Principle: ADUM1410ARWZ Working Principle

The ADUM1410ARWZ uses Analog Devices’ iCoupler technology, which integrates high-speed CMOS with monolithic air-core micro-transformers fabricated on a single chip. Each channel consists of a transmitter circuit on one side of the isolation barrier and a receiver circuit on the other. The transmitter encodes the input logic state into a series of high-frequency pulses that are magnetically coupled across the isolation barrier through the on-chip transformer. The receiver decodes the pulses and reproduces the original logic state. When the input is static (no transitions), a refresh circuit periodically sends update pulses to ensure the output remains in the correct state, solving the DC correctness problem that affects simple pulse transformers. If the input side loses power, the receiver detects the absence of refresh pulses and forces the output to the default state determined by the CTRL pin. The magnetic coupling through air-core transformers provides 3750VRMS isolation (verified by UL 1577 testing) and >25kV/µs common-mode transient immunity because the transformer is inherently immune to common-mode electric fields. The independent supply domains on each side allow the device to translate between different logic levels, such as 3.3V on one side and 5V on the other.

Pin Description: ADUM1410ARWZ Pin Definition and Functions
Pin Name Type Description
1 VDD1 Power Side 1 supply (2.7-5.5V)
2 VIA Input Channel A input (side 1)
3 VIB Input Channel B input (side 1)
4 VIC Input Channel C input (side 1)
5 VID Input Channel D input (side 1)
6 CTRL Input Default output control (high=default high, low=default low)
7 DISABLE Input Output disable control (active high)
8 GND1 Power Side 1 ground
9 GND2 Power Side 2 ground
10 VOD Output Channel D output (side 2)
11 VOC Output Channel C output (side 2)
12 VOB Output Channel B output (side 2)
13 VOA Output Channel A output (side 2)
14-15 NC — No connect
16 VDD2 Power Side 2 supply (2.7-5.5V)
Application Scenarios: In which products and applications is ADUM1410ARWZ used
  • SPI Isolation: 4 same-direction channels isolate SCLK, CS, MOSI, and MISO from MCU to ADC/DAC with a single IC
  • RS-485 Isolation: Isolates TX, RX, DE, and RE signals between MCU and RS-485 transceiver for industrial networks
  • Medical Isolation: 3750VRMS meets IEC 60601 patient safety isolation requirements in medical monitoring equipment
  • Power Supply Feedback: Isolates error amplifier output across primary-secondary boundary with >25kV/µs CMTI
  • Level Translation: Independent 2.7-5.5V supplies translate 3.3V MCU logic to 5V peripheral logic across the isolation barrier
Alternative Models: What chips are recommended as replacements for ADUM1410ARWZ
Model Manufacturer Key Difference Package Specs
ADUM1411ARWZ ADI 3 forward + 1 reverse channel (for SPI with MISO) – –
ADUM1412ARWZ ADI 2 forward + 2 reverse channels – –
ISO7740DR TI 4-ch, 5000VRMS, 100Mbps, SOIC-16 – –
Si8641BA-B-IS Skyworks 4-ch, 5kVRMS, 150Mbps, SOIC-16 – –
ADUM1410BRWZ ADI Extended temp (-40°C to +125°C), same function – –

ADUM1410ARWZ is a 4-channel 1Mbps digital isolator from ADI in SOIC-16W. The ADuM1411B provides 10Mbps in the same package. The ISO7141F from TI offers 4-channel 100Mbps isolation. The Si8621BB from Skyworks provides 2-channel 150Mbps in SOIC-8. For automotive, ISO7741Q1 provides AEC-Q100 4-channel 100Mbps. The ADuM5401 adds isolated DC-DC power (isoPower) in SOIC-16W for single-supply isolated operation. The ADuM1410 uses iCoupler technology for 10x lower power than optocouplers.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1