Opens in a new tab

IR2110STRPBF

500V half-bridge gate driver, 2.5A, bootstrap, UVLO, 3.3V logic, SOIC-16

5357

Effective Inventory

Image for reference only

Manufacturer Part:

IR2110STRPBF

Package:

SOIC-16 (10.3 x 7.5 x 2.65mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IR2110STRPBF is a 500V high and low side gate driver IC from Infineon with 2.5A output, bootstrap operation, undervoltage lockout, and 3.3V logic compatibility in a SOIC-16 package.

Key Specifications

Configuration High-side and Low-side (half-bridge)
Voltage Class 500V (IR2110), 600V (IR2113)
Output Current (Source/Sink) 2.5A / 2.5A peak
Gate Drive Supply (VCC/VBS) 10V to 20V
Logic Supply (VDD) 3.3V to 20V
Turn-on Propagation Delay 120ns max
Turn-off Propagation Delay 94ns max
Rise Time 25ns typical
Fall Time 17ns typical
Quiescent Current 340µA typical
UVLO Threshold (VBS/VCC) 8.2V / 8.5V (turn-on)
Operating Temperature -40°C to +125°C
Package SOIC-16 (10.3 x 7.5mm)

Features

  • Floating channel for bootstrap operation up to 500V
  • dV/dt immune and tolerant to negative voltage transients
  • Gate drive supply range 10V to 20V
  • Undervoltage lockout for both high and low side channels
  • 3.3V logic compatible inputs
  • CMOS Schmitt-triggered inputs with pull-down
  • Cycle-by-cycle edge-triggered shutdown logic
  • Matched propagation delay for both channels
  • Outputs in phase with inputs
  • Separate logic and power ground (±5V offset)

Applications

  • Motor drive inverters (3-phase using 3 ICs)
  • Switch-mode power supplies (half-bridge, full-bridge)
  • Class-D audio amplifiers
  • Induction heating and welding
  • Solar inverter and UPS systems
Product Introduction: IR2110STRPBF Product Introduction

The IR2110STRPBF from Infineon (formerly International Rectifier) is a high-voltage, high-speed gate driver IC designed to drive N-channel MOSFETs or IGBTs in half-bridge configurations. The floating high-side channel operates up to 500V using a bootstrap capacitor for the supply. The proprietary HVIC and latch-immune CMOS technology provides robust monolithic construction. Logic inputs are compatible with 3.3V logic, and CMOS Schmitt-triggered inputs with internal pull-down resistors prevent floating inputs. The gate drive supply range of 10V to 20V supports standard power MOSFET and IGBT gate drive voltages. Undervoltage lockout on both channels prevents insufficient gate drive. A cycle-by-cycle edge-triggered shutdown (SD) input immediately disables both outputs for fault protection. Matched propagation delays simplify use in high-frequency applications. The STRPBF suffix denotes the SOIC-16 package with tape-and-reel and lead-free construction.

Working Principle: IR2110STRPBF Working Principle

The IR2110STRPBF consists of two independent gate driver channels: a low-side driver referenced to COM (power ground) and a high-side driver referenced to VS (the switch node). The low-side driver operates from VCC to COM. The high-side driver operates from the bootstrap supply VB to VS, where VB is generated by an external bootstrap diode and capacitor charged from VCC when the low-side switch is on (VS ≈ COM). When the low-side switch turns off and the high-side switch turns on, VS rises to the motor supply voltage (up to 500V), and the bootstrap capacitor VB floats with it, maintaining the gate drive voltage above VS. The level-shifting circuit transfers the HIN logic signal from the logic ground (VSS) reference to the floating VS reference. The Schmitt-triggered inputs provide noise immunity, and the internal pull-down resistors ensure the outputs default to off when inputs are floating. The undervoltage lockout (UVLO) circuit on the VBS supply ensures the high-side driver does not output a partial gate voltage if the bootstrap capacitor is not sufficiently charged. The SD (shutdown) input, when driven high, immediately disables both outputs on a cycle-by-cycle basis without latching, allowing the PWM controller to resume operation on the next cycle. The matched propagation delay (120ns on, 94ns off) ensures synchronized switching of both channels, critical for dead-time control in half-bridge converters.

Pin Description: IR2110STRPBF Pin Definition and Functions
Pin Name Type Description
1 VSS Power Logic ground
2 HIN Input High-side logic input (active high)
3 SD Input Shutdown input (active high, edge-triggered)
4 LIN Input Low-side logic input (active high)
5 VDD Power Logic supply (3.3V to 20V)
6 VCC Power Low-side gate drive supply (10V to 20V)
7 COM Power Low-side return (power ground)
8 NC — No connect
9 LO Output Low-side gate drive output
10 NC — No connect
11 VS Power High-side floating supply return (switch node)
12 HO Output High-side gate drive output
13 VB Power High-side floating supply (bootstrap)
14-16 NC — No connect
Application Scenarios: In which products and applications is IR2110STRPBF used
  • Motor Drives: Three IR2110 ICs drive a 3-phase inverter for ACIM or BLDC motors; bootstrap eliminates isolated supplies
  • SMPS Half-Bridge: 500V rating suits offline half-bridge converters; UVLO prevents shoot-through during startup
  • Class-D Audio: Matched propagation delays and 25ns rise time enable high-fidelity PWM switching at 200kHz+
  • Solar Inverters: Edge-triggered shutdown provides fast fault protection for overcurrent conditions in grid-tied inverters
  • Induction Heating: dV/dt immunity and negative VS tolerance handle the extreme switching transients in resonant converters
Alternative Models: What chips are recommended as replacements for IR2110STRPBF
Model Manufacturer Key Difference Package Specs
IR2113STRPBF Infineon 600V version, same functionality – –
IRS2110STRPBF Infineon Newer process, same pinout, improved specs – –
2ED2111-06 Infineon Modern replacement, 600V, better UVLO – –
FAN7382MX onsemi 600V half-bridge, 350mA, SOIC-14 – –
SI8235AB-D-IS Skyworks Isolated 5kV, dual gate driver, 2A – –

IR2110STRPBF is a 600V half-bridge gate driver from Infineon in SOIC-16W. The IR2113 provides the same with independent logic ground. The IR2184 offers simpler half-bridge driver with enable pin. The IR2214 provides 1200V rating for SiC/IGBT applications. The UCC21520 from TI provides 4A/6A dual-channel isolated gate driver in SOIC-16. The Si823x from Skyworks offers isolated dual-output drivers. For low-voltage motor driving, DRV8323 provides triple half-bridge with MOSFET integration.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1