Opens in a new tab

ULN2803ADW

8-ch Darlington array, 500mA/ch, 50V, flyback diodes, SOIC-18

7500

Effective Inventory

Image for reference only

Manufacturer Part:

ULN2803ADW

Package:

SOIC-18 Wide (11.62 x 7.52 x 2.35mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ULN2803ADW is an 8-channel NPN Darlington transistor array from Texas Instruments with 500mA per channel, 50V output rating, built-in flyback diodes, and TTL/CMOS-compatible inputs in an SOIC-18 package.

Key Specifications

Number of Channels 8 (NPN Darlington pairs)
Collector-Emitter Voltage 50V max
Continuous Collector Current 500mA per channel
Collector-Emitter Saturation 1.6V max at 350mA
Input Compatibility TTL, CMOS (5V, 3.3V logic)
Input Current (ON) 0.93mA typical (at 3.85V input)
DC Current Gain >1000 (at 350mA output)
Flyback Diodes Yes (one per channel, common COM pin)
Output Structure Open-collector (sinks to GND)
Thermal Resistance 66.4°C/W (RθJA)
Operating Temperature -40°C to +85°C
Package SOIC-18 Wide (11.62 x 7.52mm)

Features

  • 8 Darlington pairs in a single package
  • 500mA continuous current per channel (parallelable for higher current)
  • 50V output voltage rating
  • Built-in flyback/clamp diodes for inductive loads
  • TTL and CMOS input compatible
  • Open-collector outputs (sinking)
  • Common COM pin for flyback diode return
  • No separate VCC supply required (logic powered through input pins)

Applications

  • Relay and solenoid driver arrays
  • Stepper motor driver (2 channels per winding)
  • LED and lamp driver arrays
  • Logic-level to high-voltage interface
  • PLC and industrial control output stages
Product Introduction: ULN2803ADW Product Introduction

The ULN2803ADW from Texas Instruments is an 8-channel NPN Darlington transistor array designed for interfacing low-level logic circuits to high-voltage/high-current loads. Each of the eight Darlington pairs consists of two NPN transistors in a cascade configuration, providing a current gain exceeding 1000. This allows a few milliamps of input current from a 3.3V or 5V MCU to switch loads up to 500mA at 50V. The open-collector outputs sink current to ground, making the device suitable for driving relays, solenoid valves, stepper motors, and LED arrays. Each channel includes an internal flyback/clamp diode connected to the common COM pin, which protects the output transistors from the inductive kickback generated when switching inductive loads. The COM pin must be connected to the load supply voltage to provide a return path for the flyback current. Channels can be paralleled for higher current capability. The DW suffix denotes the SOIC-18 wide-body surface-mount package.

Working Principle: ULN2803ADW Working Principle

Each of the eight channels in the ULN2803ADW consists of an NPN Darlington pair with a 2.7kΩ input resistor and a built-in flyback diode. When a logic HIGH (typically 3.3V or 5V) is applied to the input pin, current flows through the 2.7kΩ resistor into the base of the first transistor. The first transistor amplifies this base current and drives the base of the second transistor, which provides additional current gain. The total Darlington gain exceeds 1000, so a 1.8mA input current (5V input / 2.7kΩ) can sink over 350mA at the output. The output is an open-collector NPN Darlington that pulls the load to ground when activated. The saturation voltage is typically 1.1V at 200mA and 1.6V max at 350mA. When driving an inductive load (relay coil, motor winding), the collapsing magnetic field generates a flyback voltage spike when the Darlington turns off. The internal clamp diode (cathode to COM, anode to output) provides a safe current path for this spike, as long as the COM pin is connected to the positive supply of the load. Without the COM connection, the flyback spike can exceed the 50V rating and destroy the output transistor. Multiple channels can be paralleled by connecting their inputs and outputs together to increase current capability, but the total package dissipation must be managed.

Pin Description: ULN2803ADW Pin Definition and Functions
Pin Name Type Description
1 IN1 Input Channel 1 logic input
2 IN2 Input Channel 2 logic input
3 IN3 Input Channel 3 logic input
4 IN4 Input Channel 4 logic input
5 IN5 Input Channel 5 logic input
6 IN6 Input Channel 6 logic input
7 IN7 Input Channel 7 logic input
8 IN8 Input Channel 8 logic input
9 COM Power Common flyback diode return (connect to load V+)
10 OUT8 Output Channel 8 open-collector output
11 OUT7 Output Channel 7 open-collector output
12 OUT6 Output Channel 6 open-collector output
13 OUT5 Output Channel 5 open-collector output
14 OUT4 Output Channel 4 open-collector output
15 OUT3 Output Channel 3 open-collector output
16 OUT2 Output Channel 2 open-collector output
17 OUT1 Output Channel 1 open-collector output
18 GND Power Ground (emitter common)
Application Scenarios: In which products and applications is ULN2803ADW used
  • Relay Arrays: 8 channels directly drive 8 relay coils without external transistors or diodes; COM connects to relay supply
  • Stepper Motors: 2 channels per winding (bipolar) or 4 channels (unipolar) drive small stepper motors at up to 24V
  • MCU I/O Expansion: Darlington gain >1000 allows direct connection from 3.3V MCU GPIO to 24V/500mA loads
  • LED Arrays: Open-collector outputs sink up to 500mA per channel for high-brightness LED indicators or displays
  • Industrial PLC: 8 isolated outputs on one IC replace 8 discrete transistor+diode combinations, simplifying board layout
Alternative Models: What chips are recommended as replacements for ULN2803ADW
Model Manufacturer Key Difference Package Specs
ULN2803APG TI Same in DIP-18 through-hole package – –
ULN2003ADW TI 7-channel version in SOIC-16 – –
ULN2803ADWR TI Same in SOIC-18, tape and reel – –
TD62083AFG Toshiba 8-ch Darlington, 500mA, SOIC-18 equivalent – –
MIC2981/82BWN Microchip 8-ch source driver (sourcing, not sinking) – –

ULN2803ADW is an 8-channel Darlington driver from TI in SOIC-18 for 5V logic. The ULN2803A provides the same in DIP-18 for through-hole. The ULN2801A offers 6.5V/500µA input for 6-15V CMOS. The ULN2802A is designed for 14-25V PMOS logic. The ULN2804A accepts 6-15V CMOS input levels. The MC1413B from onsemi provides equivalent 8-channel driver in SOIC-18. The TBD62783A from Toshiba offers 8-channel source driver (high-side) alternative. For 4-channel, ULN2003A provides 7 drivers in DIP-16.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1