Opens in a new tab

2N7002K-7

60V N-ch MOSFET, 380mA, 2Ω Rds, ESD 2kV, logic-level, SOT-23-3

20919

Effective Inventory

Image for reference only

Manufacturer Part:

2N7002K-7

Package:

SOT-23-3 (TO-236-3, 2.9 x 1.3 x 1.0mm, surface mount)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The 2N7002K-7 is a 60V N-channel enhancement-mode small-signal MOSFET from Diodes Incorporated with 380mA drain current, 2Ω RDS(on), ESD protection, and logic-level gate drive in a SOT-23-3 package.

Key Specifications

VDS (Drain-Source Voltage) 60V
ID (Continuous Drain Current) 380mA @ TA=25°C (1 sq in pad)
RDS(on) Max 2.0Ω @ VGS=10V, ID=500mA
RDS(on) Max (Logic Level) 3.0Ω @ VGS=5V, ID=50mA
VGS(th) (Gate Threshold) 1.0V to 2.5V @ ID=250µA
VGS (Gate-Source Voltage) ±20V max
Qg (Total Gate Charge) 0.3nC typical @ VGS=4.5V
Ciss (Input Capacitance) 30pF typical @ VDS=25V
ESD Rating (HBM) 2000V
Power Dissipation 370mW (minimum pad), 540mW (1 sq in pad)
RθJA 357°C/W (minimum pad), 240°C/W (1 sq in pad)
Operating Temperature -55°C to +150°C
Package SOT-23-3 (2.9 x 1.3mm, surface mount)

Features

  • 60V N-channel enhancement-mode MOSFET
  • ESD protected gate (2000V HBM)
  • Low RDS(on): 2Ω max at VGS=10V
  • Logic-level gate drive (5V compatible)
  • Extremely low gate charge: 0.3nC typical
  • Low input capacitance: 30pF typical
  • Halogen-free and BFR-free
  • Industry-standard SOT-23-3 footprint

Applications

  • Low-side load switch
  • Level shifting circuits
  • DC-DC converter switching
  • Portable device power management
  • MCU GPIO load driving
Product Introduction: 2N7002K-7 Product Introduction

The 2N7002K-7 from Diodes Incorporated is a 60V N-channel enhancement-mode small-signal MOSFET in an SOT-23-3 surface-mount package. It offers 380mA continuous drain current with 2Ω maximum on-resistance at VGS=10V, and 3Ω at VGS=5V, making it compatible with both 5V and 3.3V logic-level gate drive. The device features built-in ESD protection rated at 2000V HBM on the gate, protecting against handling and assembly damage. The extremely low 0.3nC total gate charge and 30pF input capacitance enable fast switching with minimal drive power, allowing direct MCU GPIO drive without gate driver ICs. The -7 suffix denotes tape-and-reel packaging with 3000 units per reel. The K suffix distinguishes this improved version from the classic 2N7002, offering lower RDS(on) and ESD protection.

Working Principle: 2N7002K-7 Working Principle

The 2N7002K-7 is an enhancement-mode N-channel MOSFET that remains off (non-conducting) when VGS = 0V. When VGS exceeds the threshold voltage (1.0V to 2.5V), an inversion layer forms under the gate oxide, creating a conductive channel between drain and source. At VGS = 5V (logic level), the channel is partially enhanced, giving RDS(on) of 3Ω max—sufficient for switching loads up to 100mA with minimal voltage drop. At VGS = 10V, the channel is fully enhanced, and RDS(on) drops to 2Ω max. The 0.3nC gate charge means the gate capacitance can be charged and discharged very quickly, enabling switching times in the nanosecond range. With an MCU GPIO pin capable of sourcing/sinking 4-8mA, the gate can transition from 0V to 3.3V or 5V in approximately Qg × ΔV / I = 0.3nC × 5V / 4mA ≈ 0.4ns (theoretical minimum; actual switching limited by PCB parasitics). The ESD protection on the gate consists of clamping structures that shunt overvoltage transients away from the thin gate oxide, preventing dielectric breakdown during handling.

Pin Description: 2N7002K-7 Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate control terminal. ESD-protected gate (K suffix) with integrated back-to-back diodes for ±2kV HBM protection. Logic-level threshold VGS(th) = 1.0-2.5V allows direct drive from 3.3V and 5V microcontrollers. Gate charge Qg = 3.9nC typical enables fast switching.
2 Source Power Output Source terminal typically connected to ground in low-side switching configuration. Continuous drain current 300mA at TA=25°C. Internal body diode forward voltage VSD ≈ 0.95V. On-resistance RDS(on) = 1.2Ω max at VGS=10V, ID=200mA.
3 Drain Power Output Drain terminal connects to the load through a pull-up resistor or directly. Maximum VDS = 60V provides good voltage margin for 5V-24V switching applications. Drain-source leakage current is 1µA max at VDS=48V, VGS=0V. Suitable for relay driving, LED control, and level shifting.

2N7002K-7 pin assignment (SOT-23-3, top view): Pin 1 (left) = Gate, Pin 2 (center, tab) = Source, Pin 3 (right) = Drain. The K suffix adds ESD protection on the gate. The non-ESD version is 2N7002-7. For level-shifting applications, BSS138 offers lower threshold voltage (0.8V) for sub-3.3V operation. For higher current, SI2302CDS provides 2.2A with 62mΩ RDS(on).

Application Scenarios: In which products and applications is 2N7002K-7 used
  • MCU Load Switch: 5V or 3.3V GPIO directly drives gate; 380mA capability switches LEDs, relays (via coil driver), or small motors
  • Level Shifter: Open-drain configuration shifts 3.3V logic to 5V or higher; pull-up resistor on drain sets HIGH level
  • Power Gating: Low-side switch disconnects peripheral VCC rail; 2Ω at 100mA = only 200µV drop (negligible)
  • DC-DC Switch: 0.3nC Qg supports 1MHz+ switching in tiny buck/boost converters at <100mA load
  • Battery Protection: 60V standoff handles 2-cell LiPo (8.4V) with huge margin; gate pull-down ensures off during sleep
Alternative Models: What chips are recommended as replacements for 2N7002K-7
Model Manufacturer Key Difference Package Specs
2N7002ET1G onsemi Same class, 60V/300mA, SOT-23-3, equivalent – –
BSS138-7-F Diodes Inc 50V/200mA, lower threshold (1.5V), SOT-23-3 – –
2N7002K-T1-GE3 Vishay Same class, 60V/300mA, SOT-23-3 – –
DMN2075U-7 Diodes Inc 20V/4.2A, much lower Rds, SOT-23-3 – –
SI2302DS-T1-GE3 Vishay 20V/2.2A, logic-level, lower Rds, SOT-23-3 – –

2N7002K-7 is a 60V/300mA N-channel MOSFET from onsemi in SOT-23-3 with ESD protection. The 2N7002-7 provides the same without ESD gate protection. The BSS138-7-F offers lower VGS(th) of 1.0V for sub-3.3V operation. The SI2302CDS provides 20V/2.2A with 62mΩ for higher current switching. The DMN2075U offers 20V/750mA from Diodes Inc. The AO3400A from Alpha & Omega provides 30V/5A with 26mΩ. For dual N-channel, 2N7002DW provides two MOSFETs in SOT-363.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1