Opens in a new tab

BSS138-7-F

50V N-ch MOSFET, 200mA, 3.5Ω Rds, low Vth 1.5V, SOT-23-3

7357

Effective Inventory

Image for reference only

Manufacturer Part:

BSS138-7-F

Package:

SOT-23-3 (TO-236-3, 2.9 x 1.3 x 1.0mm, surface mount)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BSS138-7-F is a 50V N-channel logic-level enhancement-mode MOSFET from Diodes Incorporated with 200mA drain current, 3.5Ω RDS(on), and low gate threshold (1.5V max) in a SOT-23-3 package.

Key Specifications

VDS (Drain-Source Voltage) 50V
ID (Continuous Drain Current) 200mA @ TA=25°C
RDS(on) Max 3.5Ω @ VGS=10V, ID=220mA
RDS(on) Max (4.5V) 6.0Ω @ VGS=4.5V
VGS(th) (Gate Threshold) 0.8V to 1.5V @ ID=1mA
VGS (Gate-Source Voltage) ±20V max
Qg (Total Gate Charge) 1.7nC typical @ VGS=10V
Ciss (Input Capacitance) 27pF typical @ VDS=25V
gfs (Forward Transconductance) 100mS typical
Power Dissipation 360mW @ TA=25°C
RθJA 350°C/W
Operating Temperature -55°C to +150°C
Package SOT-23-3 (2.9 x 1.3mm, surface mount)

Features

  • 50V N-channel enhancement-mode MOSFET
  • Low gate threshold voltage: 1.5V max
  • Directly drivable from 2.5V/3.3V MCU GPIO
  • Low on-resistance: 3.5Ω max at VGS=10V
  • Fast switching: 2.5ns turn-on delay typical
  • Pb-free and halogen-free
  • Industry-standard SOT-23-3 footprint

Applications

  • I2C/SPI level shifting (bidirectional)
  • Low-voltage logic switching
  • Load switch for battery-powered devices
  • Small servo motor control
  • MOSFET gate driver pre-driver
Product Introduction: BSS138-7-F Product Introduction

The BSS138-7-F from Diodes Incorporated is a 50V N-channel logic-level enhancement-mode MOSFET specifically designed for low-voltage switching applications. The key differentiator is the low gate threshold voltage (0.8V to 1.5V), which allows the device to be fully turned on by 3.3V or even 2.5V MCU GPIO pins without level translation. At VGS=4.5V, RDS(on) is 6Ω max, and at VGS=10V, it drops to 3.5Ω max. The 200mA continuous current rating covers typical I2C pull-up, LED indicator, and small relay loads. The SOT-23-3 package occupies minimal board area. The BSS138 is the industry-standard choice for bidirectional I2C level-shifter circuits, where two MOSFETs and pull-up resistors translate between 3.3V and 5V logic domains. The -7-F suffix denotes tape-and-reel packaging with Pb-free finish.

Working Principle: BSS138-7-F Working Principle

The BSS138-7-F operates as an enhancement-mode N-channel MOSFET. The low gate threshold voltage (0.8V typical, 1.5V max) means the channel begins to form at very low VGS. At VGS = 2.5V (low-voltage MCU output), the device is partially enhanced and can pass tens of milliamps with moderate RDS(on). At VGS = 3.3V, the device is more fully enhanced, and at VGS = 5V or 10V, it is fully enhanced with minimum RDS(on). The most common application is the bidirectional I2C level shifter: two BSS138 MOSFETs connect a 3.3V I2C bus to a 5V I2C bus. The gate is tied to the lower voltage (3.3V), and each side has pull-up resistors to its respective supply. When neither side pulls the line LOW, both FETs are off (VGS ≈ 0V since source = gate voltage). When the 3.3V side pulls LOW, the MOSFET’s body diode conducts, pulling the 5V side LOW through the channel. When the 5V side pulls LOW, the VGS exceeds the threshold (3.3V gate – ~0V drain), the MOSFET turns on, and the 3.3V side is pulled LOW. This bidirectional translation works without any direction control signal.

Pin Description: BSS138-7-F Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate control terminal. Low-threshold N-channel MOSFET with VGS(th) = 0.8-1.5V, making it suitable for 2.5V-3.3V logic level shifting. The K suffix version includes ESD protection on the gate. Gate leakage current is typically 10nA. Maximum VGS = ±20V.
2 Source Power Output Source terminal. In level-shifting applications, connects to the lower-voltage side (e.g., 3.3V logic). Internal body diode conducts from Source to Drain. Continuous drain current is 220mA at TC=25°C. On-resistance RDS(on) = 3.5Ω max at VGS=10V, ID=50mA.
3 Drain Power Output Drain terminal. In level-shifting applications, connects to the higher-voltage side (e.g., 5V logic) through a pull-up resistor. Maximum VDS = 50V. Open-drain configuration allows bidirectional level shifting between two voltage domains with a single device and two pull-up resistors.

BSS138K-7 pin assignment (SOT-23-3, top view): Pin 1 (left) = Gate, Pin 2 (center, tab) = Source, Pin 3 (right) = Drain. The K suffix indicates ESD-protected gate variant. This is the industry-standard MOSFET for I2C/SPI bidirectional level shifting between 1.8V/2.5V/3.3V/5V logic domains. For higher current switching, SI2302CDS offers 2.2A with 62mΩ RDS(on) in the same SOT-23-3 package.

Application Scenarios: In which products and applications is BSS138-7-F used
  • I2C Level Shift: Two BSS138 + 4 pull-ups create bidirectional 3.3V-to-5V I2C translator; low Vth ensures conduction at 3.3V
  • 2.5V GPIO Switch: Low 1.5V threshold allows 2.5V MCU to drive gate; switches <50mA loads directly
  • Battery Load Switch: 0.5µA max gate leakage preserves battery; EN pin of MCU toggles VGS
  • Servo Control: 200mA rating drives small hobby servo signal lines; gate from MCU PWM pin
  • Gate Pre-Driver: Fast 2.5ns turn-on drives larger power MOSFET gates; reduces MCU drive requirement
Alternative Models: What chips are recommended as replacements for BSS138-7-F
Model Manufacturer Key Difference Package Specs
BSS138LT1G onsemi Same function, onsemi version, SOT-23-3 – –
2N7002K-7 Diodes Inc 60V/380mA, higher Vth (2.5V), ESD protected – –
BSS138PW Nexperia Same in TSSOP-6 (SOT-363) smaller package – –
2N7002ET1G onsemi 60V/300mA, higher voltage, similar low-Vth – –
NTR4003NT1G onsemi 30V/500mA, lower Rds, logic-level, SOT-23-3 – –

BSS138-7-F is a 50V/220mA N-channel MOSFET from onsemi in SOT-23-3 with 3.5Ω RDS(on). The BSS138K-7 provides ESD-protected gate. The 2N7002K-7 from onsemi offers 60V/300mA with 1.2Ω and ESD protection. The SI2302CDS from Vishay provides 20V/2.2A with 62mΩ for higher current. The DMN2075U from Diodes Inc offers 20V/750mA with 90mΩ. For level-shifting, BSS138 remains the industry standard for I2C bidirectional shifting. The AO3400A from Alpha & Omega provides 30V/5A with 26mΩ in the same SOT-23.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1