Opens in a new tab

TL431ACLP

Programmable shunt ref, 2.495V-36V, ±0.5%, 0.2Ω Zka, TO-92

18000

Effective Inventory

Image for reference only

Manufacturer Part:

TL431ACLP

Package:

TO-92-3 (5.2 x 4.2 x 4.2mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TL431ACLP is a precision programmable shunt voltage reference from Texas Instruments with 2.495V to 36V adjustable output, ±0.5% initial accuracy, and 1mA to 100mA cathode current range in a TO-92 through-hole package.

Key Specifications

Reference Voltage (Vref) 2.495V typical (2.470V to 2.520V for A-grade)
Adjustable Output Range Vref to 36V
Initial Accuracy (A-grade) ±0.5% at 25°C
Cathode Current (IKA) 1mA to 100mA
Dynamic Impedance 0.2Ω typical (below Vref)
Reference Input Current 2µA typical
Temperature Coefficient 30ppm/°C typical (C-grade: 0-70°C)
Cathode-Anode Voltage (Max) 37V
Operating Temperature 0°C to +70°C (C-grade)
Package TO-92-3 (5.2 x 4.2mm, through-hole)

Features

  • Programmable shunt voltage reference
  • 2.495V to 36V output range
  • ±0.5% initial accuracy (A-grade)
  • 0.2Ω dynamic impedance
  • Low reference pin current: 2µA typical
  • Wide cathode current range: 1mA to 100mA
  • Direct replacement for TL431, LM431, etc.
  • Low temperature drift: 30ppm/°C typical

Applications

  • Switch-mode power supply feedback
  • Precision voltage reference
  • Shunt regulator
  • Voltage monitoring and comparison
  • OVP and OCP circuits
Product Introduction: TL431ACLP Product Introduction

The TL431ACLP from Texas Instruments is a three-terminal programmable shunt voltage reference that functions as a precision zener diode with adjustable breakdown voltage from 2.495V to 36V. When the reference pin (REF) voltage exceeds 2.495V, the cathode (KA) conducts, pulling current away from the load. This negative feedback action is used in SMPS feedback loops: the output voltage is divided down by two resistors to the REF pin, and the TL431 shunts current through an optocoupler LED to the primary side, closing the regulation loop. The ±0.5% initial accuracy (A-grade) and 30ppm/°C temperature drift provide precision regulation over temperature. The 0.2Ω dynamic impedance means the cathode voltage changes only 0.2mV per mA of cathode current change, providing excellent load regulation. The C-grade is specified for 0°C to +70°C, and the LP suffix denotes the TO-92 through-hole package.

Working Principle: TL431ACLP Working Principle

The TL431ACLP operates as a precision shunt regulator with an internal 2.495V bandgap reference and an open-collector error amplifier. The REF pin is connected to the internal reference comparator’s non-inverting input. When VREF exceeds the internal 2.495V reference, the error amplifier drives the output transistor (between cathode and anode) to conduct more current. This increased cathode current flows through an external series resistor, dropping more voltage and reducing VREF back toward 2.495V. For a simple shunt regulator, VOUT = VREF × (1 + R1/R2) + IREF × R1 ≈ 2.495 × (1 + R1/R2), where R1 is the upper divider resistor (VOUT to REF) and R2 is the lower divider resistor (REF to ANODE). For VOUT = 5V, R1/R2 ≈ 1.0, so R1 = R2 = 10kΩ. The minimum cathode current of 1mA is required for proper regulation; below this, the device may not regulate accurately. In an SMPS application, the cathode connects through a resistor and optocoupler LED to the output rail; the REF pin monitors the divided output voltage; and the anode connects to the output ground. When the output rises, the TL431 conducts more, increasing optocoupler LED current, which reduces the primary-side PWM duty cycle, bringing the output back to the setpoint.

Pin Description: TL431ACLP Pin Definition and Functions
Pin Name Type Description
1 REF Input Reference input pin. The device regulates to maintain 2.495V at this pin relative to Anode (±0.5% for A-grade). Input bias current is 2µA typical. Connect a voltage divider from Cathode to REF to Anode to set the desired output voltage. The reference voltage is internally trimmed to 2.495V at 25°C with 10ppm/°C typical drift.
2 Anode Power Anode (ground reference) pin. Connects to the most negative point in the circuit. All voltages are referenced to this pin. Maximum anode-cathode voltage is 37V. This pin carries the full operating current minus the cathode current.
3 Cathode Output Cathode (output) pin. Draws current to regulate the voltage at the REF pin to 2.495V. Operating cathode current range is 1mA to 100mA. Minimum operating current (Imin) is 0.5mA typical (1mA max) to maintain regulation. Dynamic impedance is 0.2Ω typical above Imin.

TL431ACLP pin assignment (TO-92-3, flat face toward you, pins down): Pin 1 (left) = REF, Pin 2 (center) = Anode, Pin 3 (right) = Cathode. In SOT-23-3 (DBZR) package: Pin 1 = REF, Pin 2 = Anode, Pin 3 = Cathode. In SOIC-8: Pin 1-4 = NC, Pin 5 = Cathode, Pin 6 = NC, Pin 7 = REF, Pin 8 = Anode. For basic shunt regulator, connect REF to Cathode for 2.495V fixed output, or use voltage divider for higher output voltages (Vout = 2.495V × (1 + R1/R2)).

Application Scenarios: In which products and applications is TL431ACLP used
  • SMPS Feedback: Output voltage divided to REF; cathode drives optocoupler LED; regulates isolated 5V/12V/24V outputs
  • Adjustable Zener: R1/R2 sets VOUT from 2.495V to 36V; replaces fixed zener with precision, adjustable voltage
  • Voltage Monitor: REF monitors divided rail voltage; cathode pulls down enable pin when voltage exceeds threshold
  • OVP Circuit: Cathode triggers SCR gate when REF exceeds 2.495V; crowbar protects downstream circuitry
  • Current Source: Series resistor + TL431 creates precision constant-current sink; I = VREF/R2
Alternative Models: What chips are recommended as replacements for TL431ACLP
Model Manufacturer Key Difference Package Specs
KA431AZTA onsemi Direct compatible replacement with identical 2.495V reference and 1-100mA cathode current range TO-92-3 2.495V/1-100mA
LM431ACM TI Direct equivalent in SOIC-8 surface-mount for compact power supply feedback loops SOIC-8 2.495V/A-grade
TLV431ACDBZR TI Low-voltage 1.24V reference version with 80µA minimum cathode current for low-power designs SOT-23-3 1.24V/80µA min
ATL431LIBQDBZR TI Ultra-low-power 25µA min cathode current version for battery-powered and standby circuits SOT-23-3 2.5V/25µA min
LM4040C10IDBZR TI Fixed 10V precision shunt reference with 0.1% tolerance for high-accuracy voltage regulation SOT-23-3 10V fixed/0.1%

TL431ACLP is an adjustable 2.495-36V shunt voltage regulator in TO-92-3 with ±1% A-grade reference tolerance and 1-100mA cathode current. The KA431 and LM431 are direct pin-compatible replacements. TLV431 offers a 1.24V low-voltage reference, while ATL431 provides ultra-low 25µA minimum cathode current for battery applications. LM4040 provides fixed-voltage precision references.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1