Opens in a new tab

IRF9540NPBF

-100V P-ch MOSFET, -23A, 117mΩ Rds, 140W, TO-220

2713

Effective Inventory

Image for reference only

Manufacturer Part:

IRF9540NPBF

Package:

TO-220-3 (15.6 x 10.6 x 4.6mm, through-hole, tab=drain)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IRF9540NPBF from Infineon Technologies is a -100V P-channel power MOSFET with -23A continuous drain current, 117mΩ RDS(on), and 140W power dissipation in a TO-220 through-hole package, commonly used as a high-side switch.

Key Specifications

Polarity P-Channel
VDS (Drain-Source Voltage) -100V
ID (Continuous Drain Current) -23A @ TC=25°C, -14A @ TC=100°C
RDS(on) Max 117mΩ @ VGS=-10V
VGS(th) (Gate Threshold) -2V to -4V @ ID=-250µA
VGS (Gate-Source Voltage) ±20V max
Qg (Total Gate Charge) 64.7nC typical @ VGS=-10V
Qgd (Gate-Drain Charge) 34nC typical
Ciss (Input Capacitance) 1300pF @ VDS=-25V
gfs (Forward Transconductance) 5.3S typical
PD (Power Dissipation) 140W @ TC=25°C (Infineon), 150W (Vishay)
RθJC (Junction-to-Case) 1.1°C/W
Avalanche Energy (Single Pulse) 84mJ (Infineon), 640mJ (Vishay)
Operating Temperature -55°C to +150°C (or +175°C for some versions)
Package TO-220-3 (through-hole, tab=drain)

Features

  • -100V P-channel power MOSFET
  • Low RDS(on): 117mΩ at VGS=-10V
  • High current: -23A continuous
  • Avalanche rated for rugged switching
  • Fast switching speed
  • Complementary N-channel: IRF540NPBF
  • TO-220 package for easy heatsink mounting
  • 175°C maximum junction temperature

Applications

  • High-side power switching
  • H-bridge motor drive (with IRF540N)
  • Load switch for battery-powered systems
  • DC-DC converter (buck regulator high-side)
  • Reverse polarity protection
Product Introduction: IRF9540NPBF Product Introduction

The IRF9540NPBF from Infineon Technologies (formerly International Rectifier) is a -100V P-channel HEXFET power MOSFET rated for -23A continuous drain current with 117mΩ maximum on-resistance at VGS=-10V. As a P-channel device, it is the natural choice for high-side switching: the source connects to the positive rail, and pulling the gate below the source by 10V turns the MOSFET on. This eliminates the need for a gate driver or bootstrap circuit required by N-channel high-side switches. The complementary N-channel IRF540NPBF (100V, 33A, 44mΩ) pairs perfectly in H-bridge motor drive and push-pull amplifier circuits. The 140W power dissipation rating (at TC=25°C) with 1.1°C/W junction-to-case thermal resistance allows substantial current handling with adequate heatsinking. The avalanche rating provides protection against inductive kickback from motors and solenoids. The PBF suffix denotes the lead-free (Pb-free) version in TO-220 package.

Working Principle: IRF9540NPBF Working Principle

The IRF9540NPBF is a P-channel enhancement-mode MOSFET. Unlike N-channel MOSFETs where VGS must be positive relative to the source, the P-channel requires VGS to be negative (gate below source) to create a conductive channel. When VGS = 0V (gate = source), the MOSFET is off. When VGS reaches the threshold (-2V to -4V), an inversion layer forms under the gate oxide, creating a conductive channel between source and drain. At VGS = -10V, the channel is fully enhanced, and RDS(on) drops to 117mΩ max. In a high-side switch configuration, the source is connected to the positive supply rail (e.g., 12V), and the load is between the drain and ground. To turn on the MOSFET, the gate must be pulled at least 10V below the source, i.e., to 12V – 10V = 2V or lower. A simple GPIO-controlled NPN transistor can pull the gate to ground, providing VGS = -12V for full enhancement. When the GPIO goes low, the NPN turns off, and a pull-up resistor (10kΩ) pulls the gate to the source (12V), making VGS = 0V and turning the MOSFET off. The 64.7nC total gate charge means the gate capacitance requires this amount of charge to switch; with a 10kΩ pull-up, the turn-off time is approximately R × Ciss = 10kΩ × 1300pF ≈ 13µs, which is acceptable for load switching but may need a gate driver for PWM applications.

Pin Description: IRF9540NPBF Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate control terminal. Pull Gate below Source to turn ON the P-channel MOSFET. Apply VGS < -4V (-10V recommended for RDS(on) of 0.117Ω). Maximum VGS rating is ±20V. Gate charge is 62nC typical. For logic-level drive, use a pull-up resistor to Source for OFF state and a BJT or driver to pull Gate low for ON state.
2 Drain Power Output Drain terminal connected to the load. Rated for -100V VDS and -19A continuous drain current at TC=25°C. The tab of TO-220 package is electrically connected to Drain. On-resistance is 117mΩ typ at VGS=-10V. Maximum power dissipation 150W at TC=25°C with proper heatsinking.
3 Source Power Output Source terminal typically connected to the positive supply for high-side switching. Internal body diode conducts from Drain to Source. Suitable for reverse-polarity protection, battery disconnect, and high-side load switching up to 100V. Body diode reverse recovery time is approximately 180ns.

IRF9540NPBF pin assignment (TO-220-3, front view, pins down): Pin 1 (left) = Gate, Pin 2 (center) = Drain/Tab, Pin 3 (right) = Source. P-channel MOSFET for high-side switching: Gate pulled to GND = ON, Gate at Source = OFF. The tab is connected to Drain. Complementary N-channel: IRF540N (100V/33A). For lower on-resistance P-channel at 60V, consider FQP47P06 (60V/47A/26mΩ).

Application Scenarios: In which products and applications is IRF9540NPBF used
  • High-Side Switch: Source to +12V battery; gate driven by NPN to GND; load between drain and GND; simple on/off control
  • H-Bridge: IRF9540N (high-side) + IRF540N (low-side) per half-bridge; bidirectional DC motor control
  • Reverse Polarity: Source to battery+, drain to load; gate tied to source via zener; blocks reverse current automatically
  • Buck Converter: High-side P-ch switch; VGS driven by controller; 117mΩ at 5A = 2.9W conduction loss
  • Battery Disconnect: Source to battery+, drain to system; MCU-controlled NPN drives gate; 0.5µA gate leakage preserves battery
Alternative Models: What chips are recommended as replacements for IRF9540NPBF
Model Manufacturer Key Difference Package Specs
IRF9540NSPBF Infineon Same in D2PAK (TO-263) surface-mount – –
FQP27P06 onsemi -60V, -27A, 70mΩ, lower voltage, lower Rds – –
IRF4905PBF Infineon -55V, -74A, 20mΩ, lower voltage, much higher current – –
NDP6020P onsemi -20V, -24A, 45mΩ, logic-level gate – –
SIHF9540-E3 Vishay Equivalent, -100V, -19A, 200mΩ, RoHS – –

IRF9540NPBF is a -100V/-19A P-channel MOSFET from Infineon in TO-220 with 117mΩ RDS(on). The FQP47P06 from onsemi provides -60V/-47A with 26mΩ for lower on-resistance. The IRF9Z34N offers -60V/-12A with 100mΩ in a smaller footprint. The IRF4905PBF provides -55V/-74A with 78mΩ for higher current. The STD20P06 from ST offers -60V/-20A with 65mΩ in D2PAK. For surface-mount, IRF9540NSPBF provides the same in D2PAK. Complementary N-channel: IRF540N (100V/33A).

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1