Opens in a new tab

LM7808CT

8V 1A positive linear regulator, TO-220, thermal/SCP protection

5000

Effective Inventory

Image for reference only

Manufacturer Part:

LM7808CT

Package:

TO-220-3 (15.75 x 10.16 x 4.7mm, through-hole, tab=GND)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM7808CT from onsemi is a 3-terminal 1A positive voltage regulator providing a fixed 8V output with internal thermal shutdown and short-circuit protection in a TO-220 package.

Key Specifications

Output Voltage 8V fixed (±4% at 25°C)
Output Current 1A continuous
Input Voltage Range 10.5V to 35V
Dropout Voltage 2V typical @ 1A
Line Regulation 5mV typical (10.5V to 25V)
Load Regulation 10mV typical (5mA to 1.5A)
Quiescent Current 5mA typical
Ripple Rejection 73dB typical @ 120Hz
Output Noise 52µV/VO (10Hz to 100kHz)
Thermal Shutdown ~170°C junction
Operating Temperature -40°C to +125°C (junction)
Package TO-220-3 (through-hole, tab=GND)

Features

  • Fixed 8V output
  • 1A continuous output current
  • Internal thermal overload protection
  • Internal short-circuit current limiting
  • 73dB ripple rejection
  • Only two external capacitors needed

Applications

  • 8V logic and analog supply
  • Op-amp power supply
  • Post-regulator
  • Instrumentation power
Product Introduction: LM7808CT Product Introduction

The LM7808CT from onsemi is a member of the LM78XX series of 3-terminal positive voltage regulators, providing a fixed 8V output at up to 1A. The 8V output is useful for powering analog circuits, op-amps, and some older logic families that require 8V rails. The device requires only two external capacitors (0.33µF input, 0.1µF output) for stable operation. The 2V dropout voltage means the input must be at least 10V to maintain regulation. The 73dB ripple rejection effectively attenuates AC mains ripple by a factor of ~4500, making the output clean for sensitive analog circuits. The CT suffix denotes the TO-220 package with commercial/industrial temperature range (-40°C to +125°C).

Working Principle: LM7808CT Working Principle

The LM7808CT uses a series pass transistor controlled by a feedback loop comparing a fraction of the output voltage with an internal bandgap reference. When the output drops below 8V, the error amplifier increases drive to the pass transistor. When the output rises above 8V, the drive is reduced. The thermal protection disables the pass transistor at ~170°C junction. The current limiting restricts output current during a short circuit. The minimum input voltage for regulation is VOUT + Vdropout = 8V + 2V = 10V. The maximum input voltage is 35V. Power dissipation is Pd = (VIN − VOUT) × IOUT; at VIN=18V and IOUT=500mA, Pd = (18-8)×0.5 = 5W, requiring a heatsink with θSA < (TJ_max − TA)/Pd − θJC − θCS = (125−50)/5 − 5 − 0.5 = 9.5°C/W.

Pin Description: LM7808CT Pin Definition and Functions
Pin Name Description
1 INPUT Unregulated DC input (10.5 V to 35 V); connect 0.33 uF capacitor to GND if more than 4 inches from rectifier filter
2 GND Common ground; connect to heatsink tab for TO-220 thermal dissipation
3 OUTPUT Regulated 8 V output; connect 0.1 uF capacitor to GND for improved transient response and stability

Package: TO-220-3 (vertical mount). Thermal resistance Rth(j-a) = 50 C/W (no heatsink), Rth(j-c) = 5 C/W. Maximum power dissipation 2 W without heatsink at 25 C ambient.

Application Scenarios: In which products and applications is LM7808CT used
  • 8 V Analog Supply Rails: Deriving a clean 8 V rail from 12 V or 15 V unregulated DC for op-amp power supplies; 0.33 uF input and 0.1 uF output bypass capacitors ensure stability
  • Split-Supply Audio Systems: Pairing LM7808CT (+8 V) with LM7908CT (-8 V) on a center-tapped transformer secondary for balanced +/-8 V audio op-amp rails
  • Post-SMPS Linear Regulation: Cascading after a switching pre-regulator to clean up 12 V switcher ripple for sensitive analog circuitry with 60 dB ripple rejection
  • Relay and Solenoid Drivers: Providing a stable 8 V supply for 8 V DC relay coils and solenoid actuators from automotive or industrial 12 V bus
  • Instrumentation Reference Supply: Powering strain gauge bridges and transducer excitation circuits requiring a stable 8 V reference with 0.1% line regulation
Alternative Models: What chips are recommended as replacements for LM7808CT
Model Manufacturer Key Difference Package Voltage
LM7808ACT onsemi Tighter output tolerance: ±2% vs ±4% for higher precision applications TO-220-3 8V fixed
L7808CV STMicroelectronics Direct equivalent with 1.5A output current and internal thermal shutdown protection TO-220-3 8V fixed
KA7808 onsemi/Fairchild Budget-friendly version with ±4% tolerance and standard 1A output rating TO-220-3 8V fixed
MC7808CTG onsemi Current production replacement with identical specifications and RoHS compliance TO-220-3 8V fixed
MC7808ACD2TG onsemi Surface-mount DPAK version for compact PCB layouts, ±2% tolerance A-grade DPAK-3 8V fixed
LM340AT-8 TI TI equivalent with ±2% tolerance and 1A output, wide input range up to 35V TO-220-3 8V fixed

For new designs requiring surface-mount, consider MC7808ACD2TG (DPAK) or LM340AT-8 (TI). All 78xx 8V regulators are pin-compatible with standard TO-220-3 footprint (IN-GND-OUT). Input voltage must exceed 10.5V for proper regulation.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1