Opens in a new tab

SN74LS192N

4-bit BCD up/down counter, separate clocks, async load/clear, carry/borrow, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS192N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LS192N from Texas Instruments is a synchronous 4-bit BCD up/down counter with separate up and down clock inputs, asynchronous clear, and parallel load — the most versatile BCD counter in the LS family in a 16-pin PDIP package.

Key Specifications

Function Synchronous 4-bit BCD up/down counter
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Count Range 0-9 (BCD decade)
Clock Inputs UP (count up), DOWN (count down), separate, negative-edge
Parallel Load Asynchronous, active-LOW (LOAD)
Clear Asynchronous, active-HIGH (CLR)
Carry/Borrow CO (carry out, active-LOW), BO (borrow out, active-LOW)
Max Clock Frequency 25MHz typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Separate UP and DOWN clock inputs
  • Synchronous counting in both directions
  • Asynchronous parallel load (preset any BCD value)
  • Asynchronous clear (CLR, active-HIGH)
  • Carry and borrow outputs for cascading
  • BCD count sequence: 0-9 up, 9-0 down

Applications

  • Up/down decade counters
  • Digital position encoders
  • Score counters
  • Frequency synthesizers
Product Introduction: SN74LS192N Product Introduction

The SN74LS192N from Texas Instruments is a synchronous 4-bit BCD up/down counter with separate UP and DOWN clock inputs. This dual-clock design means the counter direction is determined by which clock input receives pulses: pulses on UP count 0→1→2→…→9→0; pulses on DOWN count 9→8→7→…→0→9. The unused clock input must be held HIGH during counting. The 74192 is the most feature-rich BCD counter: it has asynchronous parallel load (LOAD=LOW loads D0-D3 into the counter regardless of clocks), asynchronous clear (CLR=HIGH resets to 0), and carry/borrow outputs for cascading. CO goes LOW when counting UP and the count reaches 9 (carry to next stage); BO goes LOW when counting DOWN and the count reaches 0 (borrow from next stage). For cascading: CO → UP of next stage; BO → DOWN of next stage. The 74193 is the binary (0-15) version with identical pinout. The N suffix denotes the PDIP-16 package.

Working Principle: SN74LS192N Working Principle

The SN74LS192N counts in BCD (0-9) on the negative edge of either the UP or DOWN clock. Counting UP: pulses on UP, DOWN must be HIGH. Sequence: 0→1→2→3→4→5→6→7→8→9→0 (carry). At 9, CO goes LOW on the next UP clock (carry to next decade). Counting DOWN: pulses on DOWN, UP must be HIGH. Sequence: 9→8→7→6→5→4→3→2→1→0→9 (borrow). At 0, BO goes LOW on the next DOWN clock (borrow from next decade). Parallel load: LOAD=LOW loads D0-D3 into the counter asynchronously (overrides clocks and counting). CLR=HIGH resets Q0-Q3 to 0 asynchronously (overrides LOAD, clocks). Priority: CLR > LOAD > clocks. For multi-decade counting: CO of units → UP of tens; BO of units → DOWN of tens; both clock inputs of tens are independently driven by the carry/borrow of the units stage. The 74192 counts in BCD; the 74193 (same pinout) counts in binary (0-15). Both share the same dual-clock, load, clear, carry/borrow architecture.

Pin Description: SN74LS192N Pin Definition and Functions
Pin Name Type Description
1 DOWN Input Count-down clock (negative edge, UP must be HIGH)
2 Q1 Output Output bit 1
3 Q0 Output Output bit 0 (LSB)
4 BO Output Borrow output (active-LOW; LOW at count=0 with DOWN clock)
5 CO Output Carry output (active-LOW; LOW at count=9 with UP clock)
6 Q3 Output Output bit 3 (MSB)
7 Q2 Output Output bit 2
8 GND Power Ground
9 D2 Input Parallel data input bit 2
10 D3 Input Parallel data input bit 3 (MSB)
11 D0 Input Parallel data input bit 0 (LSB)
12 D1 Input Parallel data input bit 1
13 LOAD Input Parallel load enable (active-LOW, loads D0-D3)
14 CLR Input Asynchronous clear (active-HIGH, resets to 0)
15 UP Input Count-up clock (negative edge, DOWN must be HIGH)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS192N used
  • 2-Digit Score Counter: Two 74192s; units CO → tens UP; units BO → tens DOWN; UP button increments; DOWN button decrements; score 00-99
  • Presettable Counter: D0-D3 set to desired start value; pulse LOAD; counter starts from preset value; count up or down from preset
  • Position Encoder: Rotary encoder generates UP/DOWN pulses; 74192 tracks position (0-9); display on 7-segment via CD4511
  • Frequency Synthesizer: Thumbwheel switches → D0-D3; LOAD presets divider ratio; counter counts down to 0; BO reloads preset; programmable divider
Alternative Models: What chips are recommended as replacements for SN74LS192N
Model Manufacturer Key Difference Package Supply
74LS192N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS192D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC192D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC192N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT192D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT192N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74192 is a 4-Bit Decade Counter (BCD, Up/Down). Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1