Opens in a new tab

SN74LS193N

4-bit binary up/down counter, separate clocks, async load/clear, carry/borrow, LS TTL, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LS193N

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SN74LS193N from Texas Instruments is a synchronous 4-bit binary up/down counter with separate clocks, parallel load, and clear — the binary (0-15) version of the 74192 in a 16-pin PDIP package.

Key Specifications

Function Synchronous 4-bit binary up/down counter
Logic Family LS (Low-power Schottky)
Supply Voltage 4.75V to 5.25V
Count Range 0-15 (4-bit binary)
Clock Inputs UP (count up), DOWN (count down), separate, negative-edge
Parallel Load Asynchronous, active-LOW (LOAD)
Clear Asynchronous, active-HIGH (CLR)
Carry/Borrow CO (carry, active-LOW), BO (borrow, active-LOW)
Max Clock Frequency 25MHz typical
Operating Temperature 0°C to +70°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Separate UP and DOWN clock inputs
  • Binary count: 0-15 up, 15-0 down
  • Asynchronous parallel load and clear
  • Carry/borrow outputs for cascading
  • Same pinout as SN74LS192N

Applications

  • Binary up/down counters
  • Address generation
  • Programmable frequency dividers
  • Digital position tracking
Product Introduction: SN74LS193N Product Introduction

The SN74LS193N from Texas Instruments is a synchronous 4-bit binary up/down counter with the same architecture as the 74192 but counting in binary (0-15) instead of BCD (0-9). It features separate UP and DOWN clock inputs, asynchronous parallel load, asynchronous clear, and carry/borrow outputs. The dual-clock design means counting direction is determined by which clock receives pulses: UP counts 0→1→…→15→0; DOWN counts 15→14→…→0→15. The carry output (CO) goes LOW when the count is 15 and an UP pulse arrives; the borrow output (BO) goes LOW when the count is 0 and a DOWN pulse arrives. These outputs cascade directly to the next stage’s UP/DOWN inputs for multi-stage counters. The 74193 is identical to the 74192 in pinout and functionality — the only difference is the count modulus (16 vs 10). The 74193 is preferred when the full 0-15 range is needed, such as in address generation, binary frequency division, and digital signal processing. The N suffix denotes the PDIP-16 package.

Working Principle: SN74LS193N Working Principle

The SN74LS193N counts in binary (0-15) on the negative edge of the UP or DOWN clock. Counting UP: pulses on UP, DOWN must be HIGH. Sequence: 0→1→2→…→15→0 (carry). At 15, CO goes LOW on the next UP clock. Counting DOWN: pulses on DOWN, UP must be HIGH. Sequence: 15→14→…→1→0→15 (borrow). At 0, BO goes LOW on the next DOWN clock. Parallel load: LOAD=LOW loads D0-D3 into the counter asynchronously. CLR=HIGH resets to 0 asynchronously. Priority: CLR > LOAD > clocks. For multi-stage cascading: CO of stage 1 → UP of stage 2; BO of stage 1 → DOWN of stage 2. Two stages count 0-255 (8-bit); four stages count 0-65535 (16-bit). The separate UP/DOWN clocks allow independent control of increment and decrement — useful when UP and DOWN signals come from different sources (e.g., two rotary encoders, or increment/decrement buttons).

Pin Description: SN74LS193N Pin Definition and Functions
Pin Name Type Description
1 DOWN Input Count-down clock (negative edge, UP must be HIGH)
2 Q1 Output Output bit 1
3 Q0 Output Output bit 0 (LSB)
4 BO Output Borrow output (active-LOW; LOW at count=0 with DOWN clock)
5 CO Output Carry output (active-LOW; LOW at count=15 with UP clock)
6 Q3 Output Output bit 3 (MSB)
7 Q2 Output Output bit 2
8 GND Power Ground
9 D2 Input Parallel data input bit 2
10 D3 Input Parallel data input bit 3 (MSB)
11 D0 Input Parallel data input bit 0 (LSB)
12 D1 Input Parallel data input bit 1
13 LOAD Input Parallel load enable (active-LOW, loads D0-D3)
14 CLR Input Asynchronous clear (active-HIGH, resets to 0)
15 UP Input Count-up clock (negative edge, DOWN must be HIGH)
16 VCC Power Supply (5V)
Application Scenarios: In which products and applications is SN74LS193N used
  • 8-Bit Binary Counter: Two 74193s; CO(#1) → UP(#2); BO(#1) → DOWN(#2); 8-bit count 0-255; cascaded carry/borrow
  • Programmable Divider: Preset divisor-1 on D0-D3; LOAD presets counter; count down to 0; BO reloads preset; output = input/divisor
  • Position Tracker: Rotary encoder generates UP/DOWN pulses; 74193 tracks absolute position (0-15); overflow/underflow via CO/BO
  • Address Generator: D0-D3 = start address; LOAD presets; UP/DOWN pulses scan memory addresses; read/write sequential locations
Alternative Models: What chips are recommended as replacements for SN74LS193N
Model Manufacturer Key Difference Package Supply
74LS193N TI/Nexperia Original TTL version with 5V-only supply, typical propagation delay 10-15ns DIP-16 5V TTL
74LS193D TI/Nexperia Surface-mount SOIC version of LS with identical logic function SOIC-16 5V TTL
74HC193D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-16 2-6V CMOS
74HC193N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-16 2-6V CMOS
74HCT193D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-16 4.5-5.5V TTL-in
74HCT193N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-16 4.5-5.5V TTL-in

The 74193 is a 4-Bit Binary Counter (Up/Down). Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1