Opens in a new tab

ISO7720DR

Dual-channel digital isolator, 100Mbps, SOIC-8

2869

Effective Inventory

Image for reference only

Manufacturer Part:

ISO7720DR

Package:

SOIC-8 (5.00 x 4.00 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

ISO7720DR Overview

The ISO7720DR is a dual-channel digital isolator from Texas Instruments providing 5000VRMS isolation voltage with data rates up to 100Mbps. It features SOIC-8 package, supports 2.375V to 5.5V wide voltage supply, suitable for industrial communication and motor control in high-noise environments.

Key Features

  • Isolation voltage: 5000VRMS
  • Data rate: 100Mbps
  • Channel configuration: 1 forward + 1 reverse
  • Propagation delay: 11ns (typical)
  • Supply voltage: 2.375V-5.5V
  • Operating temperature: -40C to 125C
  • High CMTI: 100kV/us
Product Introduction: ISO7720DR Product Introduction

The ISO7720DR is a dual-channel digital isolator from Texas Instruments in an 8-pin SOIC narrow-body (4.90 x 3.91 mm) package, providing 3000 Vrms isolation per UL 1577 with reinforced insulation per VDE. It features two unidirectional channels in the same direction (2/0), 100 Mbps data rate, 11 ns typical propagation delay, and greater than 100 kV per microsecond common-mode transient immunity (CMTI). Operating from 2.25 V to 5.5 V on both sides with 1.7 mA per channel supply current at 1 Mbps, it supports voltage translation across the isolation barrier. The device defaults to high output on input loss and is rated for -55 C to +125 C operation.

Working Principle: ISO7720DR Working Principle

The ISO7720DR uses capacitive isolation technology with double silicon dioxide (SiO2) insulation barriers between the input and output sides. Each isolation channel consists of a modulator on the input side and a demodulator on the output side. The input logic signal modulates a high-frequency carrier that is capacitively coupled across the SiO2 insulation barrier. The demodulator on the output side recovers the original logic level. The double-barrier architecture provides reinforced insulation with 3000 Vrms withstand rating per UL 1577 and 8000 Vpeak transient isolation per IEC 60747-5-5. A refresh circuit continuously transmits the input state across the barrier even when the input is static, ensuring correct output state under all conditions. If the input power or signal is lost, the output defaults to a high logic level (for non-F suffix devices). The capacitive coupling approach eliminates the LED aging mechanism of optocouplers, providing a projected insulation lifetime exceeding 100 years at 1500 Vrms working voltage. The low 1.7 mA per channel supply current and 100 Mbps data rate make it suitable for isolating high-speed interfaces like SPI, UART, and GPIO signals.

Pin Description: ISO7720DR Pin Definition and Functions
Pin Name Description
1 VCC1 Side 1 power supply (2.25 V to 5.5 V); decouple with 0.1 uF
2 OUT1 Channel 1 output (side 2); follows IN1 logic state
3 OUT2 Channel 2 output (side 2); follows IN2 logic state
4 GND2 Side 2 ground
5 GND1 Side 1 ground
6 IN2 Channel 2 input (side 1); CMOS compatible
7 IN1 Channel 1 input (side 1); CMOS compatible
8 VCC2 Side 2 power supply (2.25 V to 5.5 V); decouple with 0.1 uF
Application Scenarios: In which products and applications is ISO7720DR used
  • RS-485/CAN Bus Isolation: Isolating the MCU-to-transceiver digital interface in industrial communication networks
  • SPI Interface Isolation: Providing galvanic isolation between MCU and remote ADC/DAC or sensor modules
  • Motor Drive Signal Isolation: Isolated PWM gate drive signals between controller and power stage
  • Power Supply Feedback: Isolated voltage and current feedback loops in offline SMPS and battery chargers
  • Medical Device Isolation: Patient-isolated digital communication in monitoring and diagnostic equipment
Alternative Models: What chips are recommended as replacements for ISO7720DR
Model Manufacturer Channels Rate Isolation CMTI Package
ISO7721DR Texas Instruments 2 (1/1) 100 Mbps 3000 Vrms 100 kV/us SOIC-8
ISO7720DW Texas Instruments 2 (2/0) 100 Mbps 5000 Vrms 100 kV/us SOIC-16W
ADuM1201ARZ Analog Devices 2 (1/1) 25 Mbps 2500 Vrms 25 kV/us SOIC-8
Si8621BC-B-IS Silicon Labs 2 (2/0) 150 Mbps 5000 Vrms 50 kV/us SOIC-8
FOD8012 onsemi 2 (2/0) 50 Mbps 5000 Vrms 50 kV/us SOIC-8

ISO7720DR is a 2-channel 100Mbps digital isolator from TI in SOIC-8. The ISO7721DR provides opposite default output state. The ISO7730DR offers 3-channel isolation in SOIC-16. The ADuM1201ARZ from ADI provides 2-channel 25Mbps isolation in SOIC-8. The Si8621BB from Skyworks offers 2-channel 150Mbps in smaller QSOP-8. For automotive, ISO7720QDRQ1 provides AEC-Q100 qualification. The ISO7740DR extends to 4 channels in SOIC-16 for multi-signal isolation.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1