Opens in a new tab

VO618A-3X017T

Optocoupler, 5300Vrms, CTR 50-80%, SOP-4

3291

Effective Inventory

Image for reference only

Manufacturer Part:

VO618A-3X017T

Package:

SOP-4 (4.4 x 4.0 x 2.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

VO618A-3X017T Overview

The VO618A-3X017T is a zero-crossing phototriac optocoupler from Vishay with 800V blocking voltage and 5300VRMS isolation voltage in a DIP-6 package. The built-in zero-crossing detector reduces EMI, making it ideal for AC load control applications.

Key Features

  • Blocking voltage: 800V
  • Isolation voltage: 5300VRMS
  • Zero-crossing trigger
  • Trigger LED current: 10mA max
  • dV/dt: 10000V/us
  • Operating temperature: -40C to 85C
Product Introduction: VO618A-3X017T Product Introduction

The VO618A-3X017T is a single-channel phototransistor output optocoupler from Vishay in a 4-pin SMD (gull wing) package, providing 5300 Vrms isolation voltage with a current transfer ratio (CTR) of 100 to 200 percent at 1 mA forward current. It features a VCEO of 80 V, low saturation voltage of 250 mV at 2.5 mA / 1 mA, and fast switching with 3 us turn-on and 2.3 us turn-off times. The device operates from -55 C to +110 C, making it suitable for industrial, telecom, and smart meter applications requiring reinforced insulation and high CTR linearity.

Working Principle: VO618A-3X017T Working Principle

The VO618A-3X017T couples an infrared LED on the input side to a silicon NPN phototransistor on the output side through an optically transparent insulation barrier. When forward current flows through the LED (If), it emits infrared light that passes through the internal optical coupling and illuminates the base region of the phototransistor. The absorbed photons generate base current, which is amplified by the transistor action to produce a collector current (Ic) proportional to the LED forward current. The ratio of Ic to If is the current transfer ratio (CTR), which is 100 to 200 percent for the -3 grade at If = 1 mA. The high CTR allows the output to be driven into saturation with very low input current, making the device ideal for low-power microcontroller I/O isolation. The 5300 Vrms isolation barrier provides reinforced insulation per IEC 60747-5-5 with 8 mm creepage/clearance (option 6/8), protecting users and equipment from high-voltage faults. The low coupling capacitance between input and output (0.5 pF typical) ensures high common-mode noise rejection. The -3X017T suffix denotes the SMD gull-wing package with 8 mm creepage (option 8) in tape-and-reel packaging.

Pin Description: VO618A-3X017T Pin Definition and Functions
Pin Name Description
1 Anode LED anode; connect through current-limiting resistor to drive source
2 Cathode LED cathode; connect to drive ground or sink
3 Emitter Phototransistor emitter; connect to output ground
4 Collector Phototransistor collector; connect through pull-up resistor to output supply

Package: SMD-4 (Gull Wing). Creepage/clearance: 7 mm standard, 8 mm with option 6/8 for enhanced insulation. The 3X017T suffix indicates: 3 = CTR grade 100-200%, X = lead form option, 017 = option 8 (8 mm creepage), T = tape and reel.

Application Scenarios: In which products and applications is VO618A-3X017T used
  • Switch Mode Power Supplies: Feedback loop isolation in offline AC-DC and DC-DC converters with high CTR for low-power operation
  • Smart Meters: Isolated communication between metering IC and display/communication module
  • Industrial Controls: PLC digital I/O channel isolation with reinforced insulation rating
  • AC Adapter Safety: Primary-to-secondary signal isolation meeting IEC 60950-1 and IEC 62368-1
  • Telecom Line Isolation: Ring/signal detection isolation in modem and SLIC circuits
Alternative Models: What chips are recommended as replacements for VO618A-3X017T
Model Manufacturer CTR Viso VCEO Package
VO617A-3X017T Vishay 50-80% 5300 Vrms 80 V SMD-4
PC817X3J000F Sharp 50-300% 5000 Vrms 35 V DIP-4
CNY17-3 Vishay/Renesas 100-200% 5300 Vrms 70 V DIP-6
SFH619A-3 ams-OSRAM 100-200% 5300 Vrms 80 V DIP-4
LTV-817A Lite-On 80-160% 5000 Vrms 35 V DIP-4

VO618A-3X017T is a phototransistor optocoupler from Vishay in SMD-4 with 100-200% CTR and 5.3kVrms isolation. The VO617A-3X017T provides lower 50-80% CTR for low-sensitivity applications. VO618A-4X017T offers 160-320% CTR grade. PC817C provides similar 200-400% CTR in DIP-4 through-hole at lower cost. For higher speed, TLP2710 from Toshiba offers 5Mbps logic output with 5kVrms isolation. SFH6156-X from ams-OSRAM provides similar phototransistor optocoupler in SMD-4.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1