Opens in a new tab

DRV8711DCPR

Stepper motor gate driver, SPI, 5-60V, HTSSOP-28

14089

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8711DCPR

Package:

HTSSOP-28 (9.70 x 4.40 x 1.20 mm, w/ EP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

DRV8711DCPR Overview

The DRV8711DCPR is a stepper motor external MOSFET gate driver from Texas Instruments, operating from 8V to 52V, supporting up to 1/256 microstepping via SPI interface, with built-in overcurrent and thermal shutdown protection, in an HTSSOP-28 package.

Key Features

  • Supply voltage: 8V-52V
  • Gate drive current: 100mA source/200mA sink
  • SPI control interface
  • Microstep resolution: 1/256
  • Overcurrent protection
  • Thermal shutdown
Product Introduction: DRV8711DCPR Product Introduction

The DRV8711DCPR is a stepper motor gate driver from Texas Instruments in a 38-pin HTSSOP (9.7 x 4.4 mm) package, designed to drive external N-channel MOSFET H-bridges for high-current bipolar stepper motor applications. It supports motor supply voltages from 8 V to 52 V with up to 1/256 microstepping via an integrated indexer and 8-bit DAC per winding. The device features SPI control for all parameters, automatic mixed decay mode (smart tune), adjustable gate drive current (5-80 mA), stall detection via back-EMF, and extensive diagnostics including over-current, under-voltage, over-temperature, and open-load detection. A 5 V / 10 mA regulator output powers external logic.

Working Principle: DRV8711DCPR Working Principle

The DRV8711DCPR generates the gate drive signals for four external half-bridge N-channel MOSFET pairs (two per motor winding) to form two complete H-bridges. The internal step indexer divides each full step into up to 256 microsteps, generating sinusoidal current references for the A and B windings with a 90-degree phase offset. The current through each winding is sensed via an external sense resistor and compared with the DAC-generated reference by an internal PWM chopper controller. When the sensed current exceeds the reference, the chopper enters the decay phase. The smart tune decay mode automatically selects the optimal fast-to-slow decay ratio based on the operating point, eliminating the need for manual decay tuning across speed and load conditions. The SPI interface provides full register-level control over microstep resolution, current setpoint, gate drive strength, blanking time, and decay parameters. The stall detection algorithm monitors the back-EMF of the motor to detect a stalled rotor without external sensors. Gate drive current is programmable from 5 mA to 80 mA per output, optimizing switching speed versus EMI for different MOSFET selections. Internal protection circuits include over-current protection (OCP), over-temperature shutdown (OTS), and under-voltage lockout (UVLO).

Pin Description: DRV8711DCPR Pin Definition and Functions
Pin Name Description
1 nSLEEP Sleep mode input; active low, pull high for normal operation
2 STEP Step input; rising edge advances one microstep
3 DIR Direction input; sets rotation direction
4 SDI SPI data input; serial data from MCU
5 SDO SPI data output; serial data to MCU
6 SCLK SPI clock input
7 nCS SPI chip select; active low
8 nFAULT Fault output; active low, open-drain fault indicator
9 AVDD Analog reference supply (3.3 V); decouple with 0.1 uF
10 DVDD Digital logic supply (3.3 V); decouple with 0.1 uF
11,16 AGND Analog ground
12 VREF External current reference input; overrides internal DAC if used
13 ISENSE1 Current sense input winding A; connect to sense resistor
14 ISENSE2 Current sense input winding B; connect to sense resistor
15 VM Motor supply voltage (8 V to 52 V)
17-20 AH1,AL1,AH2,AL2 Gate drive outputs H-bridge A; high-side and low-side
21-24 ASH1,ASL1,ASH2,ASL2 Source sense connections H-bridge A
25-28 BH1,BL1,BH2,BL2 Gate drive outputs H-bridge B
29-32 BSH1,BSL1,BSH2,BSL2 Source sense connections H-bridge B
Application Scenarios: In which products and applications is DRV8711DCPR used
  • Industrial Stepper Drives: High-power stepper motor controllers for CNC and packaging machinery with external MOSFETs
  • Textile Equipment: Smooth 1/256 microstepping for vibration-free yarn handling and fabric production
  • Laboratory Automation: Precision linear stage positioning with stall detection eliminating end-switch wiring
  • 3D Printers (Large Format): High-current NEMA 23/34 stepper driving with external MOSFETs
  • Semiconductor Equipment: Wafer handling robot joint actuators requiring high resolution and sensorless stall detection
Alternative Models: What chips are recommended as replacements for DRV8711DCPR
Model Manufacturer VM Microstep Interface Package
DRV8711DCUR Texas Instruments 8-52 V 1/256 SPI QFN-32
TMC5160 Trinamic 8-60 V 1/256 SPI/UART QFN-48
L6480H STMicroelectronics 8-85 V 1/128 SPI HTSSOP-28
TMC6140 Trinamic 8-60 V 1/256 SPI QFN-48
A5972 Allegro 8-50 V 1/16 Step/Dir TSSOP-28

DRV8711DCPR is a 52V stepper motor gate driver from TI in 38-HTSSOP with 1/256 microstepping and SPI control. The DRV8711DCUR provides the same in 28-TSSOP with fewer features. DRV8711EVM is the evaluation module for quick prototyping. For integrated MOSFET solutions, DRV8825 provides 2.5A with 1/32 stepping. The TMC5130 from Trinamic offers 1/256 stepping with StallGuard sensorless homing. DRV8432 provides dual H-bridge for two DC motors or one stepper.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1