Opens in a new tab

Home » Integrated Circuits ICs, Sensors » ESD1014MUTAG

ESD1014MUTAG

Dual ESD protection diode, 5.5V, 0.35pF, X2-DFN1110-2

6704

Effective Inventory

Image for reference only

Manufacturer Part:

ESD1014MUTAG

Package:

X2-DFN1110-2 (1.1 x 1.0 x 0.35 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

ESD1014MUTAG Overview

The ESD1014MUTAG is a single-channel ESD protection diode from Infineon with 5V working voltage, only 0.27pF line capacitance, and +/-12kV IEC ESD withstand capability in an ultra-small TSSP-2 (0201) package, ideal for high-speed signal line ESD protection.

Key Features

  • Working voltage: 5V
  • Line capacitance: 0.27pF
  • ESD protection: +/-12kV (IEC 61000-4-2)
  • Clamping voltage: 9.2V (IPP=3A)
  • Leakage current: 10nA
  • Ultra-small 0201 package
Product Introduction: ESD1014MUTAG Product Introduction

The ESD1014MUTAG is an ultra-low capacitance ESD protection diode array from onsemi in a 10-UDFN (2.6 x 2.6 mm) package, designed for high-speed data line protection. It features 3.8 pF typical capacitance between I/O lines and GND, 1.5 pF line-to-line, supporting multi-GHz signal integrity. The device provides IEC 61000-4-2 ESD protection up to 30 kV contact discharge, with 11 V clamping voltage at 25 A. The 3.3 V working voltage and 450 W peak pulse power rating make it suitable for USB 2.0, Ethernet, and other high-speed interfaces. AEC-Q101 qualified versions are available with the SZ prefix.

Working Principle: ESD1014MUTAG Working Principle

The ESD1014MUTAG uses a steering (rail-to-rail) TVS diode topology with four bidirectional channels. In normal operation, the diode array presents only its low junction capacitance (3.8 pF I/O to GND, 1.5 pF line-to-line) to the protected data lines, which is negligible at data rates up to several GHz and does not degrade signal integrity or eye diagram quality. When an ESD or surge event occurs on any protected line, the corresponding TVS diode rapidly avalanches and conducts the transient current to the GND rail, clamping the voltage to a safe level (7.5 V at 1 A, 11 V at 25 A). The steering diodes also clamp line-to-line transients, protecting differential pairs. The low clamping voltage ensures the protected IC input never exceeds its absolute maximum rating. The device responds in sub-nanosecond time, fast enough to clamp IEC 61000-4-2 ESD strikes. The 450 W peak pulse power rating (8/20 us waveform) also provides protection against electrical fast transient (EFT) and lightning-induced surges per IEC 61000-4-4 and 61000-4-5.

Pin Description: ESD1014MUTAG Pin Definition and Functions
Pin Name Description
1 I/O 1 ESD protected I/O line 1; connect to data line
2 GND Ground; connect to PCB ground plane
3 I/O 2 ESD protected I/O line 2; connect to data line
4 I/O 3 ESD protected I/O line 3; connect to data line
5 VP Positive protection rail; connect to protected power rail via Zener
6 I/O 4 ESD protected I/O line 4; connect to data line
7 N/C No connect
8 N/C No connect
9 N/C No connect
10 GND Ground; exposed pad on bottom, solder to PCB ground plane
Application Scenarios: In which products and applications is ESD1014MUTAG used
  • USB 2.0 Protection: ESD clamping on D+ and D- data lines with low capacitance for signal integrity
  • Ethernet Protection: 10/100/1000 Ethernet differential pair ESD protection on TX and RX lanes
  • DVI/HDMI Protection: High-speed digital video interface ESD clamping on TMDS data lines
  • Automotive Infotainment: AEC-Q101 qualified ESD protection for vehicle USB and Ethernet ports
  • Industrial Communication: ESD and EFT protection for RS-485 and CAN bus transceiver pins
Alternative Models: What chips are recommended as replacements for ESD1014MUTAG
Model Manufacturer Cj VRWM ESD Rating Package
SZESD1014MUTAG onsemi 3.8 pF 3.3 V 30 kV UDFN-10
PRTR5V0U2X NXP 0.9 pF 5.0 V +/-8 kV SOT-143
TPD2E2U06QDBZRQ1 Texas Instruments 0.35 pF 3.6 V +/-15 kV SOT-23
PESD2USB5-AX Nexperia 0.5 pF 5.0 V +/-15 kV SOD-323
ESD5Z3.3T1G onsemi 30 pF 3.3 V +/-15 kV SOD-523

ESD1014MUTAG is a 4-channel ESD protection diode from onsemi in UDFN-10 (2.6×2.6mm) with 3.8pF capacitance and IEC 61000-4-2 Level 4 (30kV) rating. The SZESD1014MUTAG provides AEC-Q101 automotive qualification. PRTR5V0U2X from Nexperia offers 2-channel ESD with 1pF capacitance for USB 2.0 high-speed. TPD4E05U06DQAR from TI provides 4-channel 0.5pF ESD for USB 3.0. For cost-sensitive designs, USBLC6-2 from ST offers 2-channel ESD in SOT-23-6.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1