Opens in a new tab

TPS61230DRC

5A boost converter, 2.3-5.5V input, 5.5V output, VSON-10

9898

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61230DRC

Package:

VSON-10 (3.0 x 3.0 x 0.90 mm, w/ EP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

TPS61230DRC Overview

The TPS61230DRC is a 5A switch current boost converter from Texas Instruments with input voltage of 2.3V-5.5V, 2.2MHz switching frequency, up to 93% efficiency, in a VSON-10 package, suitable for Li-ion battery boost to 5V and USB power supply applications.

Key Features

  • Input voltage: 2.3V-5.5V
  • Maximum output: 5.5V
  • Switch current: 5A
  • Switching frequency: 2.2MHz
  • Efficiency up to 93%
  • True shutdown
Product Introduction: TPS61230DRC Product Introduction

The TPS61230DRC is a 5 A synchronous boost converter from Texas Instruments in a 3 x 3 mm VSON-10 package, delivering up to 2.1 A output at 5 V from a 3.3 V input. It operates from a 2.3 V to 5.5 V input range with adjustable output from 2.5 V to 5.5 V, achieving up to 96 percent efficiency. The 2 MHz switching frequency minimizes inductor and capacitor size. Features include programmable soft-start, power-save mode for light-load efficiency, input voltage supervisor with adjustable threshold, load disconnect during shutdown, output over-voltage protection, and a power-good output indicator.

Working Principle: TPS61230DRC Working Principle

The TPS61230DRC uses a quasi-constant on-time valley current mode control scheme. During the on-time, the low-side N-channel MOSFET switch connects the inductor to ground, causing inductor current to ramp up. When the peak current threshold is reached, the switch turns off and the high-side P-channel synchronous rectifier turns on, transferring energy to the output. The valley current mode control regulates the inductor valley current, providing fast transient response and stable operation with low-ESR ceramic output capacitors. At light loads, the device enters power-save mode (PSM), skipping switching cycles to maintain regulation while dramatically reducing switching losses and quiescent current. The adjustable input voltage supervisor monitors VIN and disables switching when the input drops below the programmed threshold, preventing deep battery discharge. The programmable soft-start controls the inrush current by gradually increasing the current limit during startup. The power-good (PG) output indicates when the output voltage is within regulation. The load disconnect feature opens the output path during shutdown, preventing current flow from input to output.

Pin Description: TPS61230DRC Pin Definition and Functions
Pin Name Description
1 EN Enable input; high = active, low = shutdown with load disconnect
2 VIN Input supply (2.3 V to 5.5 V); connect 10 uF ceramic capacitor to GND
3 IN+ Input voltage supervisor threshold; connect resistor divider from VIN
4 SS Soft-start programming; connect capacitor to GND to set startup ramp time
5 PG Power-good output; open-drain, high impedance when VOUT is in regulation
6 VOUT Boost converter output; connect output inductor and output capacitor
7 FB Feedback input; connect resistor divider from VOUT to set output voltage
8 SW Switch node; connect to boost inductor (1.0 to 2.2 uH recommended)
9 GND Power ground; connect to PCB ground plane
10 AGND Analog ground; connect to PCB ground plane
EP GND Exposed thermal pad; solder to PCB ground plane for thermal management
Application Scenarios: In which products and applications is TPS61230DRC used
  • Battery-Powered USB OTG: Boosting single-cell Li-ion (3.0-4.2 V) to 5 V for USB On-The-Go host power
  • Portable Medical Devices: Generating 5 V rail from 3.3 V battery supply for sensor and display power
  • White LED Backlight: Powering LED strings from a single Li-ion cell in portable displays
  • 3.3 V to 5 V Level Shifting: Providing 5 V I/O supply for mixed-voltage microcontroller systems
  • Super-Capacitor Charger: Boosting battery voltage to charge super-capacitors for backup power systems
Alternative Models: What chips are recommended as replacements for TPS61230DRC
Model Manufacturer Switch Iout Efficiency Package
TPS61231DRCT Texas Instruments 5 A 2.1 A 96% VSON-10
LTC3426 Analog Devices 3 A 1.5 A 95% DFN-10
MAX17017 Maxim/ADI 4 A 1.8 A 95% TQFN-16
SY7106 Silergy 5 A 2 A 95% QFN-12
BD8386EFV-M Rohm 4.5 A 1.5 A 93% HTSSOP-16

TPS61230DRC is a 5A synchronous boost converter from TI in VSON-10 (3x3mm) with 96% efficiency and 2MHz switching. The TPS61231DRCT offers a different output voltage option. TPS61232 provides adjustable output with similar performance. For higher power, TPS61235P provides 8A switch current. For lower cost, MT3608 from Aerosemi offers 2A boost in SOT-23-6. The LTC3426 from ADI provides 3A boost with 1.5MHz switching as an alternative.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1