Opens in a new tab

BC556BTA

PNP general-purpose transistor, 80V, 100mA, TO-92

8570

Effective Inventory

Image for reference only

Manufacturer Part:

BC556BTA

Package:

TO-92 (5.20 x 4.20 mm, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

BC556BTA Overview

The BC556BTA is a general purpose PNP transistor from onsemi with VCEO -80V, IC -100mA, hFE 220-475 (Group B), in a TO-92 through-hole package, suitable for low-power amplification and switching circuits.

Key Features

  • VCEO: -80V
  • IC: -100mA
  • hFE: 220-475 (Group B)
  • Transition frequency: 100MHz
  • Power dissipation: 625mW
  • VCE(sat): -0.3V
Product Introduction: BC556BTA Product Introduction

The BC556BTA is a PNP epitaxial silicon general-purpose transistor from onsemi in a TO-92 through-hole package, featuring a -65 V collector-emitter voltage rating, -100 mA continuous collector current, and 150 MHz transition frequency. With a DC current gain (hFE) range of 180 to 460 at the B gain group and 500 mW power dissipation, it is suitable for low-power amplification and switching applications. The device is Pb-free, halogen-free, and RoHS compliant, serving as a complement to the NPN BC546/BC547/BC548 series for push-pull amplifier stages.

Working Principle: BC556BTA Working Principle

The BC556BTA operates as a bipolar junction transistor (BJT) in common-emitter, common-base, or common-collector configurations. As a PNP device, current flows from emitter to collector when the base is biased negative relative to the emitter. The base-emitter junction is forward-biased by applying a voltage approximately -0.6 V below the emitter, injecting holes from the emitter into the base region. Most of these holes cross the narrow base and are collected by the reverse-biased collector junction, producing a collector current that is the base current multiplied by the DC current gain (hFE). For switching applications, the transistor is driven between cutoff (base-emitter junction reverse-biased or zero) and saturation (base current sufficient to drive collector-emitter voltage to VCE(sat), typically -90 mV at IC=-10 mA). The 150 MHz transition frequency (fT) allows use in medium-frequency amplifier stages and oscillator circuits.

Pin Description: BC556BTA Pin Definition and Functions
Pin Name Description
1 Collector Current sink terminal; connects to load or supply rail
2 Base Control terminal; small current flow controls larger collector current
3 Emitter Current source terminal; typically connected to positive supply in common-emitter configuration

Package: TO-92-3 (Case 135AR, formed leads for tape and reel). Pin identification viewed from the flat face with leads pointing down: left=Collector, center=Base, right=Emitter.

Application Scenarios: In which products and applications is BC556BTA used
  • Small-Signal Amplification: Low-noise audio preamplifier stages and microphone input circuits
  • Push-Pull Output Stages: Complementary pair with BC546/BC547 for class AB audio output amplifiers
  • General-Purpose Switching: Driving LEDs, relays, and small loads from microcontroller GPIO pins
  • Current Mirrors: Precision current source circuits in analog signal processing
  • Oscillator Circuits: RC and LC oscillators up to several tens of MHz using the 150 MHz fT
Alternative Models: What chips are recommended as replacements for BC556BTA
Model Manufacturer Polarity VCEO IC fT Package
BC557BTA onsemi PNP -45 V -100 mA 150 MHz TO-92
BC558BTA onsemi PNP -30 V -100 mA 150 MHz TO-92
BC807-40 Nexperia PNP -45 V -500 mA 100 MHz SOT-23
2N3906 onsemi PNP -40 V -200 mA 250 MHz TO-92
MMBT3906 onsemi PNP -40 V -200 mA 250 MHz SOT-23

BC556BTA is a -65V/-100mA PNP general-purpose transistor from onsemi in TO-92-3 with hFE 110-800. The BC557BTA offers lower -45V VCEO for lower-voltage circuits. BC558BTA provides -30V with optimized low-noise performance. The BC327-25 from Infineon offers higher -800mA current in SOT-23 for surface-mount designs. Complementary NPN: BC546BTA through BC550BTA series share the same TO-92 pinout for push-pull amplifier pairs.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1