Opens in a new tab

MCP7940N-I/SN

RTC with SRAM and EEPROM, I2C, SOIC-8

13492

Effective Inventory

Image for reference only

Manufacturer Part:

MCP7940N-I/SN

Package:

SOIC-8 (5.23 x 5.36 x 1.75 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

MCP7940N-I/SN Overview

The MCP7940N-I/SN is a battery-backed I2C real-time clock from Microchip integrating 64 bytes SRAM and 128 bytes EEPROM, with only 1.2uA timekeeping current, dual alarm outputs, in an SOIC-8 package.

Key Features

  • I2C interface (400kHz)
  • Supply voltage: 1.8V-5.5V
  • Timekeeping current: 1.2uA
  • 64 bytes SRAM
  • 128 bytes EEPROM
  • Dual alarm function
  • External 32.768kHz crystal
Product Introduction: MCP7940N-I/SN Product Introduction

The MCP7940N-I/SN is a battery-backed I2C real-time clock/calendar (RTCC) with 64 bytes of SRAM from Microchip Technology, housed in an 8-pin SOIC package. It tracks time using internal counters for seconds, minutes, hours, days, months, years, and day-of-week with automatic leap year compensation through 2399. The device features dual programmable alarms, on-chip digital trimming with 1 PPM resolution and plus or minus 129 PPM range, and a multifunction output pin configurable as clock output, alarm output, or general-purpose output. Operating from 1.8 V to 5.5 V with I2C speeds up to 400 kHz, it achieves AEC-Q100 qualification for automotive applications.

Working Principle: MCP7940N-I/SN Working Principle

The MCP7940N-I/SN uses a 32.768 kHz tuning fork crystal as the timebase, divided down by internal counters to generate seconds, minutes, hours, days, months, and years. The I2C serial interface allows a host microcontroller to read and write the timekeeping registers and configure alarm functions. The digital trimming circuit adjusts the crystal oscillator frequency in 1 PPM steps by periodically adding or omitting oscillator cycles, compensating for crystal tolerance and temperature drift. When VCC drops below the switchover threshold, the power-sense circuit automatically switches to the backup battery supply (VBAT, minimum 1.3 V), ensuring continuous timekeeping and SRAM data retention. The alarm registers compare user-programmed values against the current time; upon match, the multifunction output pin asserts and the alarm flag is set in the status register. The CLKOUT pin can output programmable frequencies of 32.768 kHz, 8.192 kHz, 4.096 kHz, or 1 Hz derived from the crystal oscillator.

Pin Description: MCP7940N-I/SN Pin Definition and Functions
Pin Name Description
1 X1 Crystal oscillator input; connect 32.768 kHz crystal
2 X2 Crystal oscillator output; connect 32.768 kHz crystal
3 VBAT Battery backup input (1.3 V to 5.5 V); powers timekeeping and SRAM when VCC is absent
4 VSS Ground
5 SDA I2C serial data; open-drain, requires external pull-up resistor
6 SCL I2C serial clock; open-drain, requires external pull-up resistor
7 MFP Multi-function output; configurable as alarm output, clock output, or general-purpose output
8 VCC Main power supply (1.8 V to 5.5 V)
Application Scenarios: In which products and applications is MCP7940N-I/SN used
  • Automotive Real-Time Clock: AEC-Q100 qualified timekeeping for infotainment and body control modules
  • Industrial Data Logging: Timestamping events and sensor readings in battery-backed measurement systems
  • Embedded System Wake-Up: Alarm-triggered microcontroller wake from sleep mode for periodic tasks
  • Power Management: Time-stamped power-fail detection with automatic battery switchover logging
  • Consumer Electronics: Calendar and alarm functions in smart meters, thermostats, and appliances
Alternative Models: What chips are recommended as replacements for MCP7940N-I/SN
Model Manufacturer Interface SRAM Trimming Package
MCP7940NT-I/SN Microchip I2C 64 B Digital SOIC-8
MCP79412-I/SN Microchip I2C 64 B + EEPROM Digital SOIC-8
DS3231SN Maxim/ADI I2C 236 B TCXO SOIC-16
PCF8563BS NXP I2C 0 No TSSOP-8
RV-8803-C7 Micro Crystal I2C 0 No DFN-8

MCP7940N-I/SN is a battery-backed I2C RTC from Microchip in 8-SOIC with 64-byte SRAM and digital trimming. The MCP7940NT-I/SN variant includes a temperature-compensated crystal oscillator option. MCP7940M-I/SN omits the SRAM for lower cost. DS1307Z from Maxim/ADI is the industry-standard alternative RTC without battery backup. For higher accuracy, DS3231 provides ±2ppm TCXO-based RTC with integrated crystal in SOIC-16.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1