Opens in a new tab

HFCN-9700+

High-pass filter, 9700MHz cutoff, SMA connector module

12866

Effective Inventory

Image for reference only

Manufacturer Part:

HFCN-9700+

Package:

SMA Module (12.7 x 6.6 x 4.3 mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

HFCN-9700+ Overview

The HFCN-9700+ is a ceramic high pass filter from Mini-Circuits, passband 9700MHz-16980MHz, 1.2dB insertion loss, 50 Ohm impedance, in an SMD FV1206-4 package, suitable for X/Ku-band microwave communication.

Key Features

  • Passband: 9700-16980MHz
  • Cutoff frequency: 9700MHz
  • Insertion loss: 1.2dB
  • VSWR: 1.5:1
  • Impedance: 50 Ohm
  • Power handling: 7W
Product Introduction: HFCN-9700+ Product Introduction

The HFCN-9700+ is an LTCC-based ceramic high-pass filter from Mini-Circuits with a passband from 9700 MHz to 16980 MHz and a 3 dB cutoff at 9070 MHz. It provides 32 dB typical stopband rejection from DC to 6770 MHz with only 0.8 dB typical insertion loss in the passband center. The ultra-compact EIA 1206 package (3.2 mm x 1.6 mm x 1.04 mm) integrates an entire high-pass filter into a chip-scale form factor. Rated for 7 W CW RF power handling, it supports transmit path applications in demanding environments from -55 C to +100 C.

Working Principle: HFCN-9700+ Working Principle

The HFCN-9700+ is constructed using Low Temperature Co-fired Ceramic (LTCC) technology, embedding multiple distributed LC filter sections within a multilayer ceramic substrate. The LTCC process prints conductive patterns on ceramic tape layers that are stacked, laminated, and co-fired to form a monolithic filter structure. The distributed element design creates transmission zeros at stopband frequencies, providing sharp roll-off below the 9.7 GHz cutoff. The 50 Ohm matched input and output eliminate the need for external matching networks. The ceramic construction provides excellent thermal stability with minimal insertion loss variation over the -55 C to +100 C operating range. DC blocking capacitors are required if DC voltage is present at either port.

Pin Description: HFCN-9700+ Pin Definition and Functions
Pin Name Description
1 RF IN RF signal input; 50 Ohm matched, DC decoupling required if DC present
2 GND Ground; connect to PCB ground plane
3 RF OUT RF signal output; 50 Ohm matched, DC decoupling required if DC present
4 GND Ground; connect to PCB ground plane

Package: FV1206-4 (EIA 1206 ceramic). Dimensions: 3.20 x 1.60 x 1.04 mm. The device is symmetrical; Pin 1 is identified by a marking dot on top surface.

Application Scenarios: In which products and applications is HFCN-9700+ used
  • Sub-Harmonic Rejection: Filtering mixer LO sub-harmonics in upconverter and downconverter chains
  • Transmitter Harmonic Filtering: Removing lower-frequency spurious outputs and harmonics before the power amplifier
  • Electronic Warfare: Exciter and receiver front-end filtering for EW and SIGINT systems operating in X/Ku-band
  • Point-to-Point Radio: Image and spurious rejection in microwave backhaul transceivers
  • Laboratory Instrumentation: Signal conditioning and harmonic rejection in microwave test setups
Alternative Models: What chips are recommended as replacements for HFCN-9700+
Model Manufacturer Type Passband Rejection Package
HFCN-8400+ Mini-Circuits High Pass 8.4-16.8 GHz 30 dB FV1206-4
HFCN-5800+ Mini-Circuits High Pass 5.8-14 GHz 30 dB FV1206-4
HFCN-1325+ Mini-Circuits High Pass 1.325-5.3 GHz 30 dB FV1206-4
XHF-53+ Mini-Circuits High Pass 5-12 GHz 40 dB SMA
BHP-10612+ Mini-Circuits High Pass 10.6-12 GHz 35 dB SMA

HFCN-9700+ is a 9.7-17GHz LTCC high-pass filter from Mini-Circuits in EIA 1206 (3.2×1.6mm) package with 32dB typ stopband rejection. The HFCN-8400+ provides a lower cutoff frequency at 8.4GHz for broader passband coverage. HFCN-5800+ extends the passband down to 5.8GHz. For low-pass filtering, the LFCN-12000+ provides complementary 12GHz low-pass response. All Mini-Circuits LTCC filters share the same FV1206-4 footprint for easy PCB layout interchangeability.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1