Opens in a new tab

HMC561LP3ETR

6-18GHz low noise amplifier, 22dB gain, QFN-24

13362

Effective Inventory

Image for reference only

Manufacturer Part:

HMC561LP3ETR

Package:

QFN-24 (4.0 x 4.0 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

HMC561LP3ETR Overview

The HMC561LP3ETR is a GaAs MMIC divide-by-2 frequency divider from Analog Devices, input frequency 6-18GHz, 0dBm output power, in a QFN-24 package, suitable for microwave frequency synthesis and phase-locked loops.

Key Features

  • Input frequency: 6-18GHz
  • Division ratio: 2
  • Maximum input power: +20dBm
  • Output power: 0dBm
  • Supply voltage: 5V
  • Supply current: 140mA
Product Introduction: HMC561LP3ETR Product Introduction

The HMC561LP3ETR is a GaAs PHEMT-based x2 active frequency multiplier from Analog Devices, operating from 8 GHz to 21 GHz output frequency. When driven with a 0 to +6 dBm input signal, it delivers +14 dBm typical output power with excellent Fo and 3Fo isolation of 15 dBc at 16 GHz. The additive SSB phase noise of -139 dBc/Hz at 100 kHz offset makes it ideal for low-phase-noise LO chains. Housed in a 16-lead QFN (3 mm x 3 mm) surface-mount package, it eliminates wire bonding and supports standard SMT assembly.

Working Principle: HMC561LP3ETR Working Principle

The HMC561LP3ETR utilizes GaAs PHEMT technology to implement an active frequency doubling function. The input RF signal is applied to a nonlinear PHEMT device that generates harmonics of the fundamental frequency. An integrated bandpass filter network extracts the second harmonic (2 x Fin) while suppressing the fundamental (Fo) and third harmonic (3Fo). The active design provides conversion gain rather than loss, delivering +14 dBm output from only +5 dBm input drive. The Vdd supply pin powers the internal amplifier stages, while the Vgg pin allows gate bias adjustment to optimize drain current (Idd) at 98 mA. The AC-coupled RF input and output are internally matched to 50 Ohms, requiring no external matching components.

Pin Description: HMC561LP3ETR Pin Definition and Functions
Pin Name Description
1, 3, 10, 12 GND Ground; connect to RF/DC ground plane
2 RFIN RF input; AC coupled and matched to 50 Ohms, 4-10.5 GHz
4-9, 14, 16 N/C No connect; specified with pins connected to RF/DC ground
11 RFOUT RF output; AC coupled and matched to 50 Ohms, 8-21 GHz
13 Vdd Supply voltage +5V +/-0.5V; requires 100pF, 1000pF, and 2.2uF bypass caps
15 Vgg Gate control for multiplier; adjust for Idd = 98 mA
Application Scenarios: In which products and applications is HMC561LP3ETR used
  • LO Multiplier Chains: Point-to-point and VSAT radio transceivers requiring frequency doubling with high output power
  • Clock Generation: SONET OC-192 and SDH STM-64 high-speed clock synthesis
  • Test Instrumentation: Signal source generation for microwave test equipment and synthesizers
  • Military and Space: Radar and electronic warfare systems requiring robust, low-phase-noise frequency conversion
  • Satellite Communications: Ka-band upconverter LO chain generation from lower-frequency references
Alternative Models: What chips are recommended as replacements for HMC561LP3ETR
Model Manufacturer Function Fout Pout Package
HMC560LP3E Analog Devices x2 Multiplier 7-14 GHz +13 dBm QFN-16
HMC562LC5 Analog Devices x2 Multiplier 16-28 GHz +12 dBm LC5
HMC-XDB110 Analog Devices x2 Multiplier 20-40 GHz +11 dBm Bare Die
AMMP-6132 Macom x2 Multiplier 14-27 GHz +10 dBm PQFN
MK-2+ Mini-Circuits x2 Multiplier 5-1200 MHz +4 dBm SMA

HMC561LP3ETR is an x2 active multiplier from ADI/Hittite in 3x3mm QFN-16 covering 8-21GHz output. The HMC564LP3 provides x2 multiplication with 14-28GHz output range. The HMC-X2-0001 offers x2 multiplication up to 30GHz in bare die form. For x3 multiplication, HMC563LP3ETR provides 12-31.5GHz output. The HMC560LP3ETR is an x2 multiplier optimized for 6-18GHz input with lower phase noise. All HMC LP3-series multipliers share the same 3x3mm QFN-16 footprint for interchangeability.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1