Opens in a new tab

ADM7170ACPZ-1.8-R7

500mA CMOS LDO, 1.8V fixed, 5uVrms noise, 42mV dropout

4727

Effective Inventory

Image for reference only

Manufacturer Part:

ADM7170ACPZ-1.8-R7

Package:

LFCSP-8 (3.0 x 3.0 x 0.73 mm, w/ EP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

ADM7170ACPZ-1.8-R7 Overview

The ADM7170ACPZ-1.8-R7 is a 500mA ultralow noise, high PSRR LDO regulator from Analog Devices with fixed 1.8V output, 94dB PSRR at 1kHz, only 3.8uV RMS output noise, in an LFCSP-8 package, suitable for FPGA core and precision analog power supply.

Key Features

  • Fixed output voltage: 1.8V
  • Output current: 500mA
  • Dropout: 200mV at 500mA
  • PSRR: 94dB at 1kHz
  • Output noise: 3.8uV RMS
  • Supply voltage: 2.3V-6.5V
Product Introduction: ADM7170ACPZ-1.8-R7 Product Introduction

The ADM7170ACPZ-1.8-R7 is a 500 mA, ultralow noise, high PSRR CMOS LDO from Analog Devices with a fixed 1.8 V output and an input range of 2.3 V to 6.5 V. It combines low output noise of 5 uVrms (100 Hz to 100 kHz) with an ultra-fast transient response of 1.5 us for a 1 mA to 500 mA load step. The very low dropout voltage of 42 mV at 500 mA minimizes power dissipation, making it well-suited for noise-sensitive, space-constrained applications in portable and battery-powered equipment.

Working Principle: ADM7170ACPZ-1.8-R7 Working Principle

The ADM7170ACPZ-1.8-R7 employs a PMOS pass element controlled by a high-bandwidth error amplifier. The error amplifier continuously compares the output feedback voltage with an internal precision reference, adjusting the gate drive of the PMOS transistor to maintain regulation. The CMOS design eliminates the base-current penalty of bipolar LDOs, keeping ground current constant at 0.7 mA regardless of load. The fast loop response (1.5 us settling) is achieved through a proprietary compensation scheme that maintains stability with only a 4.7 uF ceramic output capacitor. The soft-start (SS) pin allows programmable output ramp time to control inrush current during startup. The enable (EN) pin provides precision threshold control for supply sequencing, and the device includes overcurrent and thermal shutdown protection.

Pin Description: ADM7170ACPZ-1.8-R7 Pin Definition and Functions
Pin Name Description
1 VOUT Regulated 1.8 V output; connect 4.7 uF ceramic capacitor to GND
2 VOUT Regulated output (duplicate for current capacity)
3 SENSE Output voltage sense feedback; connect to load point
4 SS Soft-start control; connect capacitor to GND for ramp, or tie to VIN for default
5 EN Enable input; precision threshold for sequencing (1.2 V typ.)
6 GND Ground reference
7 VIN Input supply (2.3 V to 6.5 V)
8 VIN Input supply (duplicate)
EP GND Exposed thermal pad; solder to PCB ground plane
Application Scenarios: In which products and applications is ADM7170ACPZ-1.8-R7 used
  • Low-Voltage MCU/SoC Core Supply: 1.8 V rail for ARM Cortex core and FPGA I/O banks
  • Precision ADC/DAC Reference: Clean analog supply for 16-24 bit data converters
  • Portable Medical Devices: Battery-powered biosensor front-ends requiring low noise
  • Wireless Modules: Low-noise LNA and PLL supply in IoT and BLE transceivers
  • Clock and Timing ICs: Ultra-clean supply for crystal oscillators and clock generators
Alternative Models: What chips are recommended as replacements for ADM7170ACPZ-1.8-R7
Model Manufacturer Vout Iout Noise Package
ADM7170ACPZ-3.3-R7 Analog Devices 3.3 V 500 mA 5 uVrms LFCSP-8
TPS7A7001 Texas Instruments Adj 1 A 6 uVrms WSON-10
NCP512 onsemi Adj 300 mA 8 uVrms DFN-6
TLV75518PDBV Texas Instruments 1.8 V 500 mA 32 uVrms SOT-23-5
MAX38911 Maxim Adj 500 mA 7 uVrms WLP-6

ADM7170ACPZ-1.8V-R7 is a 500mA ultralow noise CMOS LDO from Analog Devices with 5µVrms noise, 60dB PSRR at 100kHz, and 1.5µs fast transient response in 3x3mm LFCSP-8. The family includes 1.8V, 3.3V, and 5.0V fixed-output variants with identical performance. For higher current, ADM7150 provides 800mA with 1.0µVrms noise. For adjustable output, ADM7170ACPZ offers programmable voltage. The TPS7A7001 from TI is a competitive 1A low-noise LDO alternative.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1