Opens in a new tab

ADM7150ACPZ-5.0-R7

800mA LDO, 5.0V fixed, ultralow noise 1uVrms, >90dB PSRR

7549

Effective Inventory

Image for reference only

Manufacturer Part:

ADM7150ACPZ-5.0-R7

Package:

LFCSP-8 (3.0 x 3.0 x 0.73 mm, w/ EP)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

ADM7150ACPZ-5.0-R7 Overview

The ADM7150ACPZ-5.0-R7 is an 800mA ultralow noise, high PSRR LDO regulator from Analog Devices with fixed 5.0V output, 90dB PSRR at 1kHz, only 1.6uV RMS output noise, in an LFCSP-8 package, suitable for high-precision ADC/DAC power supply.

Key Features

  • Fixed output voltage: 5.0V
  • Output current: 800mA
  • Dropout: 300mV at 800mA
  • PSRR: 90dB at 1kHz
  • Output noise: 1.6uV RMS
  • Supply voltage: 4.5V-16V
Product Introduction: ADM7150ACPZ-5.0-R7 Product Introduction

The ADM7150ACPZ-5.0-R7 is an 800 mA ultralow noise, high PSRR linear regulator from Analog Devices, providing a fixed 5.0 V output from a 4.5 V to 16 V input in a compact 3 mm x 3 mm LFCSP-8 package. It delivers an exceptional output noise of 1.0 uVrms (100 Hz to 100 kHz) and PSRR exceeding 90 dB from 1 kHz to 100 kHz, making it one of the quietest LDOs available. These characteristics make it ideal for noise-sensitive RF and precision analog applications where supply purity directly impacts system performance.

Working Principle: ADM7150ACPZ-5.0-R7 Working Principle

The ADM7150ACPZ-5.0-R7 uses a PMOS pass transistor driven by a low-noise error amplifier. The error amplifier compares a scaled version of the output voltage with an ultralow-noise internal bandgap reference. The PMOS architecture enables very low dropout voltage (600 mV at 800 mA) while maintaining ground current independent of load. A proprietary output filter architecture reduces broadband noise to below 1.7 nV per root Hz above 10 kHz, which combined with the high loop gain delivers greater than 90 dB PSRR at low frequencies. The device includes soft-start to limit inrush current, an enable pin for sequenced power-up, and comprehensive protection including current limiting, thermal shutdown, and reverse-current blocking. Only a single 10 uF ceramic output capacitor is required for stability.

Pin Description: ADM7150ACPZ-5.0-R7 Pin Definition and Functions
Pin Name Description
1 VOUT Regulated 5.0 V output; connect 10 uF ceramic capacitor to GND
2 VOUT Regulated output (duplicate for thermal and current capacity)
3 SENSE Output voltage sense; connect directly to load for remote sensing
4 GND Ground reference
5 EN Enable input; high = on, low = shutdown (0.1 uA Iq)
6 NC No connect; leave floating
7 VIN Unregulated input supply (4.5 V to 16 V)
8 VIN Input supply (duplicate for thermal capacity)
EP GND Exposed thermal pad; solder to PCB ground plane
Application Scenarios: In which products and applications is ADM7150ACPZ-5.0-R7 used
  • RF/PLL Power Supply: Ultra-clean VCO and PLL rail to minimize phase noise and spurious output
  • High-Speed ADC/DAC Reference: Low-noise supply for precision data converters in communication systems
  • Test and Measurement: Noise-critical supply for oscilloscope front-ends and spectrum analyzers
  • Microwave Link: Low-phase-noise supply chain for satellite and point-to-point radio
  • Medical Imaging: Clean power for ultrasound transducer and MRI gradient amplifier front-ends
Alternative Models: What chips are recommended as replacements for ADM7150ACPZ-5.0-R7
Model Manufacturer Vout Iout Noise Package
ADM7150ACPZ-3.3-R7 Analog Devices 3.3 V 800 mA 1.0 uVrms LFCSP-8
LT3042 Analog Devices Adj 200 mA 0.8 uVrms DFN-12
TPS7A4700 Texas Instruments Adj 1 A 3.8 uVrms VSON-10
LT3045 Analog Devices Adj 500 mA 0.8 uVrms DFN-12
ADM7151ACPZ-5.0-R7 Analog Devices 5.0 V 800 mA 1.6 uVrms LFCSP-8

ADM7150ACPZ-5.0-R7 is an 800mA ultralow noise RF LDO from Analog Devices with 1.0µVrms noise and >90dB PSRR. Alternative models within the ADM7150 family differ only in output voltage (1.8V, 2.5V, 3.3V, 5.0V variants). For lower current with similar noise performance, ADM7170 offers 500mA with 5µVrms noise. The TPS7A4700 from TI is a competitive ultralow noise LDO alternative. LT3042 from ADI provides 200mA with even lower 0.8µVrms noise for the most demanding RF applications.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1