Opens in a new tab

ADM660ARZ-REEL7

CMOS charge pump, invert/double 1.5-7V, 100mA output, SOIC-8

13874

Effective Inventory

Image for reference only

Manufacturer Part:

ADM660ARZ-REEL7

Package:

SOIC-8 (5.00 x 4.00 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

ADM660ARZ-REEL7 Overview

The ADM660ARZ-REEL7 is a CMOS switched-capacitor voltage converter (charge pump) from Analog Devices, supply voltage 1.5V-5.5V, supporting voltage inversion or doubling, 100mA output current, up to 99% efficiency, in an SOIC-8 package.

Key Features

  • Supply voltage: 1.5V-5.5V
  • Output current: 100mA
  • Voltage inversion or doubling
  • Oscillator frequency: 25kHz/120kHz selectable
  • Efficiency up to 99%
  • On-resistance: 9 Ohm
Product Introduction: ADM660ARZ-REEL7 Product Introduction

The ADM660ARZ-REEL7 is a CMOS switched-capacitor voltage converter from Analog Devices, capable of inverting an input voltage from +1.5 V to +7 V or doubling it, delivering up to 100 mA output current. In inverting mode, it generates a negative supply from a positive input, while in doubling mode it can produce up to 14 V from a 7 V input. The SOIC-8 package includes a frequency control (FC) pin to select between 25 kHz for low-noise operation and 120 kHz for smaller capacitor size, requiring only 10 uF or 2.2 uF external capacitors respectively.

Working Principle: ADM660ARZ-REEL7 Working Principle

The ADM660ARZ-REEL7 operates as a switched-capacitor charge pump using a two-phase clock. During Phase 1, an internal MOSFET switch connects the flying capacitor (C1) between VIN and ground, charging it to the input voltage. During Phase 2, the switch reconnects C1 between ground and the output, transferring its charge to the output capacitor (C2). In inverter mode, the output capacitor is connected with opposite polarity, generating a negative voltage equal to -VIN. In doubler mode, the flying capacitor is stacked on top of the input voltage, producing approximately 2 x VIN at the output. The FC pin selects the internal oscillator frequency: 25 kHz (FC low or open) or 120 kHz (FC connected to LV), allowing trade-off between capacitor size and output ripple. The LV (Low Voltage) pin enables operation down to 1.5 V input.

Pin Description: ADM660ARZ-REEL7 Pin Definition and Functions
Pin Name Description
1 LV Low voltage enable; connect to GND for VIN below 3 V, leave open for VIN above 3 V
2 OSC Oscillator input; connect external capacitor to reduce frequency or drive with external clock
3 VOUT Negative output voltage (inverter mode) or doubled output (doubler mode)
4 GND Ground reference
5 CAP+ Positive terminal of flying capacitor C1
6 CAP- Negative terminal of flying capacitor C1
7 OSC2 Oscillator output (internal clock); leave open for normal operation
8 VIN Positive supply input (+1.5 V to +7 V)
Application Scenarios: In which products and applications is ADM660ARZ-REEL7 used
  • Negative Rail Generation: Creating -5 V or -12 V from a positive supply for op-amp biasing in single-supply systems
  • Display LCD Bias: Inverting supply for contrast adjustment in LCD modules
  • Portable Instrumentation: Dual-rail analog front-end supply from a single battery
  • RS-232 Transceivers: Generating the negative supply required by RS-232 line drivers
  • Voltage Doubling: Boosting 3.3 V or 5 V logic rails to 6.6 V or 10 V for gate drive
Alternative Models: What chips are recommended as replacements for ADM660ARZ-REEL7
Model Manufacturer VIN Iout Package Notes
ICL7660 Renesas 1.5-10 V 20 mA SOIC-8 Lower cost, lower current
MAX660 Maxim 1.5-5.5 V 100 mA SOIC-8 Pin-compatible, higher freq
LM2662 Texas Instruments 1.5-5.5 V 200 mA SOIC-8 Higher output current
ADM8660 Analog Devices 1.5-7 V 100 mA SOIC-8 Shutdown feature added
TPS60400 Texas Instruments 1.6-5.5 V 60 mA SOT-23 Ultra-small package

ADM660ARZ-REEL7 is a CMOS charge pump from ADI in SOIC-8. The ADM8660ARZ adds a shutdown pin for power conservation. The ICL7660S from Renesas/Intersil provides the same inverting/doubling function with enhanced ESD. The MAX660 from Maxim offers 100mA output current with selectable oscillator frequency. The LT1054 from ADI provides higher 100mA output with regulation capability. For smaller footprint, LM27761 provides 250mA regulated inverting output in DSBGA-8.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1