Opens in a new tab

NTS4173PT1G

P-Channel MOSFET, 30V, 1.2A, 150mOhm, SC-70-3

3145

Effective Inventory

Image for reference only

Manufacturer Part:

NTS4173PT1G

Package:

SC-70-3 (SOT-323) (2.0 x 1.25 x 0.95 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

NTS4173PT1G Overview

The NTS4173PT1G is a -60V P-channel enhancement mode MOSFET from onsemi, maximum drain current -3.5A, RDS(on) 95mOhm at VGS=-10V, in a SOT-23-3 package, suitable for power switching and load switching applications.

Key Features

  • VDS: -60V
  • ID: -3.5A
  • RDS(on): 95mOhm at VGS=-10V
  • VGS: +/-20V
  • Gate charge: 15nC
  • Power dissipation: 1.4W
Product Introduction: NTS4173PT1G Product Introduction

The NTS4173PT1G is a P-Channel enhancement-mode MOSFET from onsemi, rated at 30 V drain-source voltage and 1.2 A continuous drain current in a compact SC-70-3 (SOT-323) package. With an on-resistance of 150 mOhm at 10 V gate drive and a low threshold voltage of 1.5 V, it is optimized for low-voltage switching and load management in battery-operated and portable equipment. The logic-level gate drive makes it compatible with 2.5 V and 3.3 V microcontroller outputs.

Working Principle: NTS4173PT1G Working Principle

As a P-Channel MOSFET, the NTS4173PT1G conducts current from source to drain when the gate voltage is pulled below the source potential. Applying a gate-source voltage more negative than the threshold voltage (-1.5 V) creates an inversion layer (P-channel) in the N-type body, allowing hole conduction. The low on-resistance of 150 mOhm minimizes conduction losses during switching. The gate charge of 10.1 nC enables fast switching transitions, while the input capacitance of 430 pF limits the drive current requirement from microcontroller GPIO pins.

Pin Description: NTS4173PT1G Pin Definition and Functions
Pin Name Description
1 Gate Control terminal; voltage applied here modulates channel conduction
2 Source Current source terminal; typically connected to supply rail
3 Drain Current sink terminal; typically connected to load

Package: SC-70-3 (SOT-323). Pin 1 (Gate) is identified by the dot marking on the package.

NTS4173PT1G uses the SC-70-3 (SOT-323) surface-mount package with Pin 1 (Gate) identified by a dot or bevel on the package corner. This is a P-channel enhancement-mode MOSFET with logic-level gate threshold (VGS(th) = 1.0-1.5V). In typical load-switch applications, Source connects to VCC, Drain to the load, and Gate is pulled to VCC (off) or GND (on). The SC-70-3 footprint is footprint-compatible with other SOT-323 MOSFETs but NOT with SOT-23-3. The low gate charge (10.1nC) enables fast switching from microcontroller GPIO pins without additional gate drive circuitry.

Application Scenarios: In which products and applications is NTS4173PT1G used
  • Load Switching: Battery-powered device power management with microcontroller GPIO control
  • Power MUXing: Selection between multiple power sources in portable systems
  • Battery Protection: Disconnect switch in Li-ion battery management circuits
  • Level Shifting: Low-voltage logic to higher-voltage signal translation
  • LED Backlight Control: PWM dimming driver for display backlight in mobile devices

NTS4173PT1G is particularly suited for load-switching applications in battery-powered portable devices where space is at a premium. Its SC-70-3 footprint enables compact power routing in smartphones, tablets, and wearables. The logic-level gate threshold allows direct microcontroller drive without level-shifting circuitry. Common use cases include power gating of RF modules, sensor subsystems, and display backlights in portable electronics. The low gate charge (10.1nC) also makes it suitable for DC-DC converter synchronous rectification at moderate frequencies.

Alternative Models: What chips are recommended as replacements for NTS4173PT1G
Model Manufacturer Vdss Id Rds(on) Package
NTS4173NT1G onsemi 30 V 1.2 A 150 mOhm SC-70-3
SI2333DS Vishay 30 V 1.4 A 120 mOhm SOT-23
BSS84 Nexperia 50 V 130 mA 10 Ohm SOT-23
DMG2305UX Diodes Inc 20 V 1.8 A 120 mOhm SOT-23
NTR4173NT1G onsemi 30 V 1.2 A 150 mOhm SOT-23

NTS4173PT1G is a P-channel 30V/1.2A MOSFET in SC-70-3 (SOT-323) from onsemi with 150mΩ RDS(on) at VGS=10V. The NTS4173NT1G variant offers the same specs in a slightly different pinout configuration. BSS84 provides a classic P-channel alternative with higher 250mΩ RDS(on) at lower cost. For lower on-resistance, SI2305DS offers 78mΩ in SOT-23-3 with 2.5A current rating. The NX3008PBK is a dual P-channel option for complementary pair applications.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1